The Rhodes 22 Discussion Group R22 Discussion Group

The Rhodes 22 Discussion Group


< prior

Back to Month

Go to Thread

Member Picture

Mark Whipple



Motor Mount

2021-03-29; 14:41:53 EDT

Member Since

2019-10-09

Posts: 120

Hi folks,

I'm responding to an older post by Roger about his experience using an
off-the-shelf motor mount with the goal of seeing if others can share their
experiences with a non-GB outboard mounting solution.

My R22 has a Saildrive and the manufacturer is out of business. I suspect
the bellows may be leaking when the stern is heavily loaded, but even if
that's not the case I want to plan for an eventual replacement of that
engine. I'm convinced that if I don't take proactive steps, some part of
that engine/drive will fail mid-season and I won't be able to get parts for
it. As far as I know no one is currently making a Saildrive with an
outboard head on it. There are a few with small diesels like Yanmar and
Beta. I installed a Beta 16 in my 30' Nimble but I'm not interested in
trying to squeeze a diesel into the lazarette of an R22. So I plan to
replace the saildrive with an outboard mounted on the stern.

I reached out to Stan about bringing my boat down next fall to have a GB
lift system installed but he's apparently got too much on his plate right
now. In searching some of the email traffic on this topic I came up with
Roger's post below.

My question: has anyone had success with an off-the-shelf solution? I don't
plan to try to fabricate my own sliding motor mount so I need to find
something I can buy and install. Any suggestions are welcome.

Thanks,

Mark
Boston, MA

2000 R22 *Luna Mia*
1987 Nimble 30 *Under agreement*
1982 Com-Pac 16 *For Sale*

See the original archive post
×

Message to Webmaster:

To use your email application to send a messsage to the webmaster rather than this form, .



×

Post to the Rhodes 22 Email List:



×

Sending Post:

Your post is being sent... waiting