2021-04-03; 07:41:34 EDT
Member Since
2019-04-30
Posts: 230
The boat is in my driveway with the mast raised and I am still messing around with the GB traveler. The 3/16" line that came with the boat was too short to loosen up the traveler, so I used some hardware store line to play around with. Even with plenty of slack in the line the traveler still seems kind of stiff. The 5 to 1 ratio on the line is good for friction, but overkill (?) for hauling the sail to weather. It also might make dumping slow. I realize that a little ease can go a long way in righting the boat. So I'm going to try rigging with a 3 to 1 purchase, but I would have to add a clam cleat to each end to avoid slippage. After some on the water experience, I'll report back. ----- Jeff Smith 2009 R22 #101 RADIANT Atlantic Highlands Municpal Harbor Atlantic Highlands, NJ -- Sent from: http://rhodes-22.1065344.n5.nabble.com/See the original archive post