The Rhodes 22 Discussion Group R22 Discussion Group

The Rhodes 22 Discussion Group


< prior

Back to Month

Go to Thread

Member Picture

ROGER PIHLAJA



Trailer Extension Replacement

2021-04-21; 18:07:34 EDT

Member Since

2002-08-01

Posts: 1438

Chris,

My homemade tongue extension uses 2-1/2” X 2-1/2” X 3/16” thick square cold rolled C-steel tubing.  I have a short stub of 3” X 3” X 3/16” thick square tubing welded onto the end to provide a mounting point for the trailer coupling.  The 3” square tubing with a 3/16” wall thickness will slip fit over the 2-1/2” square tubing.  You will be able to do a very strong overlapping weld joint.  I built mine like this in 1989 and have dozens of launch and retrievals on the system with zero issues.

Roger Pihlaja
S/V Dynamic Equilibrium 
Sent from my iPhone

See the original archive post
×

Message to Webmaster:

To use your email application to send a messsage to the webmaster rather than this form, .



×

Post to the Rhodes 22 Email List:



×

Sending Post:

Your post is being sent... waiting