The Rhodes 22 Discussion Group R22 Discussion Group

The Rhodes 22 Discussion Group


< prior

Back to Month

Go to Thread

Member Picture

ROGER PIHLAJA



Trailer Extension Replacement

2021-05-13; 07:19:12 EDT

Member Since

2002-08-01

Posts: 1438

Jim,

I would expect the wheels on the tow vehicle to slip before the trailer axle would move or break!  The other suggestions about soaking in rust buster overnight, banging with a hammer, etc are good.  If ever got the tongue extension loose; then, I would find a way to flush the loose rust out of the channel while it’s extended.  Then, I would scrape and paint the tongue extension with Rust-O-Leum and run a rag soaked in gun oil thru the channel to stop the future rust.

Roger Pihlaja
S/V Dynamic Equilibrium

Sent from Mail<https://go.microsoft.com/fwlink/?LinkId=550986> for Windows 10

From: ROGER PIHLAJA<mailto:roger_pihlaja at msn.com>
Sent: Wednesday, May 12, 2021 3:09 PM
To: The Rhodes 22 Email List<mailto:rhodes22-list at rhodes22.org>
Subject: Re: [Rhodes22-list] Trailer Extension Replacement

Jim,

I’m wondering what would happen if you blocked the trailer’s wheels so they couldn’t move and then pulled on the hitch extension with your tow vehicle.  This seems like the maximum amount of force you could apply at home.  You could even try repeatedly backing up and going forward several times.  If that doesn’t break the rust loose, I don’t know what else to suggest.

Roger Pihlaja
S/V Dynamic Equilibrium

Sent from my iPhone

See the original archive post
×

Message to Webmaster:

To use your email application to send a messsage to the webmaster rather than this form, .



×

Post to the Rhodes 22 Email List:



×

Sending Post:

Your post is being sent... waiting