2021-05-27; 18:03:05 EDT
Member Since
2019-04-26
Posts: 91
I replaced my extension and learned a couple of things. 1) In another thread there has been a discussion about tongue weight. I had assumed that since I was successful at positioning the boat fully forward on the bunks for the first time (on the previous three retrievals, the bow was about 3" back from the bow-stop), that my tongue weight must have been too great, causing the extension to buckle. However, with the bow in contact with the bow-stop, my tongue weight is only 215 lbs. (so less than the ballpark 350 lbs. target weight). Excessive tongue weight did not cause the failure. 2) When I stood the old tongue extension on end and banged the rust out of the inside of the tube, I collected about 10 pounds of rust. Of course this was all rust that used to be part of the tube structure. Most of it seemed to come from the aft side of the tube; that is, the part that bears the tongue weight when extended. I conclude that I need to be sure to rinse the inside of the extension thoroughly each time I use it (twice a year) since we launch and retrieve in salt water. ----- Long Beach Island -- Sent from: http://rhodes-22.1065344.n5.nabble.com/See the original archive post