The Rhodes 22 Discussion Group R22 Discussion Group

The Rhodes 22 Discussion Group


< prior

Back to Month

Go to Thread

Member Picture

ROGER PIHLAJA



CDI Furler Wire Halyard Snapped - What's at the top?

2021-05-28; 13:05:01 EDT

Member Since

2002-08-01

Posts: 1438

Allyn,

There are 3 things that might have happened:

1. The swaged terminal at the end of the forestay failed.

2. The pin thru the masthead casting either failed or fell out.  i.e. cotter pin fell out

3. The masthead casting failed.

Since you say you can see a “hole” in the masthead casting, I’m thinking #2.  Take a look at the top of the forestay.  Is the swaged terminal still there?  If not, see #1.  If the swaged terminal is still there, is the pin still in the terminal?  If not, see #2.  If the pin is still there, then your masthead casting failed.

Roger Pihlaja
S/V Dynamic Equilibrium

Sent from my iPhone

See the original archive post
×

Message to Webmaster:

To use your email application to send a messsage to the webmaster rather than this form, .



×

Post to the Rhodes 22 Email List:



×

Sending Post:

Your post is being sent... waiting