The Rhodes 22 Discussion Group R22 Discussion Group

The Rhodes 22 Discussion Group


< prior

Back to Month

Go to Thread

Member Picture

Mike Riter



Furling line tensioner

2021-06-01; 12:53:11 EDT

Member Since

2018-03-19

Posts: 105

Todd, you may have missed the drama from GB on the forum when I posted the links to the video on the forum. I was promptly accused by an employee of GB of trying to subvert $$ away from GB through my evil corporate machinations. Mike Wiesner (sp?) intervened and they apologised. I'm sure the whole drama is in the archives.

Moving on from that, here are the links for the video of the furler tensioner mounted on the boat and how it works:
https://youtu.be/wwsH9xFgWYU https://youtu.be/NQTuE34GOKE

All the metal parts on it are 316 ss. Each side of the tensioner rollers have a set screw to change the tension on the line. The initial set up takes a few minutes to get the tension the way you want it, but allows for a range of line sizes. I started with a 3/16" diameter line in it then changed to 1/4". It only took a few minutes to change the tension on the rollers to accommodate the larger line size. One change that will be implemented in the final iteration is to add a spring under the set screw on one side so the tensioner can be pushed open with your fingers to allow easier insertion of the line during rigging if you trailer sail like I do.

I talked to my machinist friend and he's still interested in making some for you all. He's working on a price. He's retired and machining is a hobby for him so he responds kinda slowly. Anyone who is interested, send me a pm at mike at traildesign.com

Michael Riter
SV EmmaB



See the original archive post
×

Message to Webmaster:

To use your email application to send a messsage to the webmaster rather than this form, .



×

Post to the Rhodes 22 Email List:



×

Sending Post:

Your post is being sent... waiting