The Rhodes 22 Discussion Group R22 Discussion Group

The Rhodes 22 Discussion Group


< prior

Back to Month

Go to Thread

Member Picture

ROGER PIHLAJA



CDI Furler Wire Halyard Snapped - What's at the top?

2021-06-04; 10:41:21 EDT

Member Since

2002-08-01

Posts: 1438

Allyn,

OK, the best way to check if the mast is bent is to stretch a line taut along the length of the mast.  Any bend will be visible as a gap between the line and the mast.  A conventional mainsail rig can use the main halyard as this line.  On an IMF mainsail rig, you will have to tie a line to the masthead casting somehow.  If you find any bend, you will have to ask Stan how much bend is acceptable and if the bend can be safely removed.  My guess is, if the bend is beyond acceptable limits; then, you probably won’t be able to fix it.  The reason the mast probably won’t be repairable has to do with how the mast is made.  Our masts are made by extrusion from 7071 T6 aluminum alloy.  After extrusion, this alloy has to be heat treated to make it stiff.  But, the heat treatment process also causes the alloy to be susceptible to cold work hardening and embrittlement.  If the final mast extrusion has been bent by an impact loading, the impact site will be cold work hardened.  Bending it back will probably crack it.

Roger Pihlaja
S/V Dynamic Equilibrium

Sent from Mail<https://go.microsoft.com/fwlink/?LinkId=550986> for Windows 10

From: Allyn Baskerville<mailto:allynb at adsne.com>
Sent: Thursday, June 3, 2021 11:28 PM
To: The Rhodes 22 Email List<mailto:rhodes22-list at rhodes22.org>
Subject: Re: [Rhodes22-list] CDI Furler Wire Halyard Snapped - What's at the top?

I just thought of a couple more things. I'm pretty sure the mast was dropped at one point, because the pop top was broken when I bought it. I've fiberglassed that back together. I've noticed a couple times that the mast may not look straight - it's pretty close, and I convince myself it's an optical illusion. It seems to hook back an inch or so part way up the mast. We had a cherry picker at the boat club last weekend, so I went up there to look at the top of the mast where the toggle fork failed. Looking down the mast, I believe I could see it hook backwards slightly, and that may be why my mainsail has never furled well. I have to pull down on the clew pretty hard to get the mail to furl. I do not see any damage, e.g. dents or otherwise, to the mast, and it doesn't appear torqued. I have no idea what the previous owner did as far as changing out any standing rigging, but maybe something broke a while ago and didn’t get the lengths quite right.

See the original archive post
×

Message to Webmaster:

To use your email application to send a messsage to the webmaster rather than this form, .



×

Post to the Rhodes 22 Email List:



×

Sending Post:

Your post is being sent... waiting