> On Jun 25, 2021, at 12:03 AM, Graham Stewart <gstewart8 at cogeco.ca> wrote:
>> ?Thomas:
>> It is not a single bolt that goes all the way through. It is two short
> flathead machine screws that are inserted from the inside so that the head
> does not protrude into the space and interfere with the swing of the rudder.
> The nuts are on the outside.
>> Graham Stewart
>gstewart8 at cogeco.ca>>>>>>> -----Original Message-----
> From: Rhodes22-list [mailto:rhodes22-list-bounces at rhodes22.org] On Behalf Of
> THOMAS POLISE via Rhodes22-list
> Sent: Thursday, June 24, 2021 9:13 PM
> To: rhodes22-list at rhodes22.org> Subject: [Rhodes22-list] Rudder repair
>> I used the old bracket as a template and realized that the inside bolt on
> Lower bracket blocked rudder from lowering. I was wondering if others had
> the same condition.
>> -------------- next part --------------
> A non-text attachment was scrubbed...
> Name: IMG_4998.jpg
> Type: image/jpeg
> Size: 2463822 bytes
> Desc: not available
> URL:
> <http://rhodes22.org/pipermail/rhodes22-list/attachments/20210624/0c27c7ce/a> ttachment.jpg>
>
×
Message to Webmaster:
To use your email application to send a messsage to the webmaster rather than this form,
.