< prior
Back to Month
Go to Thread
2021-08-26; 00:32:05 EDT
Member Since
2007-05-08
Posts: 600
Good to know, Graham. Thanks.See the original archive post
On Wed, Aug 25, 2021 at 9:37 PM Graham Stewart <gstewart8 at cogeco.ca> wrote: > If you ever take the cap off the centerboard housing it is worth coating > the inside of the trunk and centerboard with antifouling. I did that and > was surprised to see years later that the paint was still good and no zebra > mussels were present. I suspect that because there is no light exposure > there the paint lasts. > > Graham Stewart > Agile, Rodes 22, 1976 > Kingston Ontario > > > > > > -----Original Message----- > From: Rhodes22-list [mailto:rhodes22-list-bounces at rhodes22.org] On Behalf > Of Steven Alm > Sent: Wednesday, August 25, 2021 1:45 PM > To: The Rhodes 22 Email List > Subject: Re: [Rhodes22-list] Swing Keel Problem > > Got Fandango up on the travel lift and indeed found quite a clog of zebra > mussels. We went after it with a pressure washer and got most of them off > in just a few minutes. The board moves freely now. They don't attach to the > anti-fouling paint at all but the inside walls of the trunk are not painted > or likewise much of the board itself. Most of the zebra mussels were up in > the trunk. I've only painted as much of the board as is exposed when I jack > the boat up off its trailer bunks a foot or so. I could pull the board out > and give it a full paint job but I don't know how I'd scrape and sand the > inside of the trunk, and the paint would wear off quickly anyway with the > board going up and down — so looks like this is something I'll just have to > deal with periodically as long as I'm in mussel infested waters! But I got > some nice pics of the diamond board. > Slim > Fandango > > On Mon, Aug 23, 2021 at 4:30 PM Steven Alm <stevenalm at gmail.com> wrote: > > > Rick, yeah, did that a lot and it did help some. > > > > On Mon, Aug 23, 2021 at 3:00 PM Rick Lange <sloopblueheron at gmail.com> > > wrote: > > > >> Hi Stephen, > >> > >> You could just pull the board up and down a few times to scrape off the > >> mussels. > >> > >> Regards, > >> > >> Rick Lange > >> > >> > >> On Mon, Aug 23, 2021 at 3:40 PM Steven Alm <stevenalm at gmail.com> wrote: > >> > >> > I got a quote from my marina to hoist the boat up with their travel > >> lift to > >> > inspect and scrape off the zebra mussels. He agreed that was almost > >> > certainly my problem. I don't need to drop the mast for this so it's a > >> > fairly simple matter. As for swimming in the Mississippi — I'm gonna > >> pass > >> > on that. Here in the heart of ag country as well as being just > >> downstream > >> > from Minneapolis/S. Paul, there's any amount of toxic waste and who > >> knows > >> > what else flowing down the river. Not only that but I know you've > heard > >> of > >> > "Nessie" lurking in Loch Ness — here in Lake Pepin, many-a-tale of > >> "Peppie" > >> > have circulated for years. I'd stay out of the water if I were you! > >> > Slim > >> > Fandango > >> > > >> > On Mon, Aug 23, 2021 at 10:35 AM David Talbot < > talbotdavid50 at gmail.com> > >> > wrote: > >> > > >> > > As they say, experience is something you get just after you needed > it… > >> > > > >> > > On Mon, Aug 23, 2021 at 11:30 AM, Charles Nieman < > >> > > blue66corvette at hotmail.com> > >> > > wrote: > >> > > > >> > > > A word to the wise …. The top of the centerboard cover is below > the > >> > > > waterline. If one tries to remove the cover while on water, you > will > >> > end > >> > > up > >> > > > testing the positive flotation system. > >> > > > > >> > > > Don’t ask me how I know > >> > > > > >> > > > Sent from my iPhone > >> > > > > >> > > > Charles Nieman > >> > > > > >> > > > > >> > > > > On Aug 23, 2021, at 9:32 AM, Graham Stewart < > gstewart8 at cogeco.ca> > >> > > wrote: > >> > > > > > >> > > > > This might be completely obvious to everyone else but I > >> "discovered" > >> > > > that the best way to make centerboard cover bolt removal easier is > >> to > >> > > place > >> > > > them with the head down and the nut on the top. Obviously the bolt > >> must > >> > > not > >> > > > be so long as to tough the floor boards. It is much easier to hold > >> the > >> > > head > >> > > > with a box wrench and remove the nut with a impact driver. > >> > > > > > >> > > > > Graham Stewart > >> > > > > gstewart8 at cogeco.ca > >> > > > > > >> > > > > > >> > > > > > >> > > > > > >> > > > > > >> > > > > > >> > > > > -----Original Message----- > >> > > > > From: Rhodes22-list [mailto:rhodes22-list-bounces at rhodes22.org] > >> On > >> > > > Behalf Of Steven Alm > >> > > > > Sent: Monday, August 23, 2021 9:42 AM > >> > > > > To: Rhodes > >> > > > > Subject: [Rhodes22-list] Swing Keel Problem > >> > > > > > >> > > > > I have the diamond board on my 1990. For the first time > yesterday > >> it > >> > > was > >> > > > > not operating smoothly like it always has for 25 years. I have > not > >> > > > grounded > >> > > > > or anything. I suspect the board and trunk are clogged up with > >> zebra > >> > > > > mussels. I’m slipped in Lake Pepin, which is really a stretch of > >> The > >> > > > > Mississippi River and yes, there’s a major infestation of these > >> > little > >> > > > > bastards on the river but I’ve not had this happen before. This > is > >> > our > >> > > > > third season at this location and like a lot of the country, > we’re > >> > > > > experiencing drought conditions and the river is much lower than > >> > usual > >> > > — > >> > > > so > >> > > > > maybe being that much closer to the bottom at my slip puts me > >> closer > >> > to > >> > > > > their habitat. > >> > > > > > >> > > > > But this is all an assumption at this point. My marina does have > >> the > >> > > big > >> > > > > sling lift and we could inspect it that way, but before I incur > >> that > >> > > > > expense I thought I’d run it by y’all first in case anybody has > >> had > >> > > this > >> > > > > happen — maybe it’s something else or maybe someone has a better > >> > idea. > >> > > > > > >> > > > > I have removed the board from the inside before to replace the > >> > control > >> > > > line > >> > > > > but it’s a real chore that I’d love to avoid if possible. > >> > > > > > >> > > > > Note: the 50 or so bolts around the centerboard cap were > >> originally > >> > > > > Phillips heads and each and every one was a struggle to remove. > I > >> > > > replaced > >> > > > > them with hex heads so it won’t be near as bad the next time, if > >> > ever. > >> > > > > > >> > > > > Thanks for any ideas > >> > > > > Slim > >> > > > > Fandango > >> > > > > > >> > > > > >> > > > >> > > >> > > > -------------- next part -------------- > A non-text attachment was scrubbed... > Name: Fandango Lift.jpeg > Type: image/jpeg > Size: 2429721 bytes > Desc: not available > URL: < > http://rhodes22.org/pipermail/rhodes22-list/attachments/20210825/9a09783b/attachment.jpeg > > > >
To use your email application to send a messsage to the webmaster rather than this form, .
Your post is being sent... 