The Rhodes 22 Discussion Group R22 Discussion Group

The Rhodes 22 Discussion Group


< prior

Back to Month

Go to Thread

Member Picture

Ric Stott



Outboard motor handling

2021-08-30; 15:44:58 EDT

Member Since

2013-07-01

Posts: 436

Mark
4 stroke Outboards are heavy.
I’m a pretty big guy and have been able to wrestle the Yamaha 8 AND THE 9.9 (they weight the same)  off and on the motor mount by myself, once the boat is on the trailer, but I can’t do it anymore.
Without a crane or boom of some sort it would be a very big challenge to get it on and off while the boat is floating.
I now have a 2020 Honda extra long shaft (25”) on the boat on an old style manual lift.
You need two people to lift it on and off safely from the ground. I bought an outboard stand with wheels for $110 bucks somewhere a few years ago. It helps to move that lug around on land.
The Honda has an even larger Couling than the Yamaha.
I found it interferes with the stern rail when tilted all the way to the 3rd position.
I am not fimiliar with a remote throttle and unless it also had remote shifting - would not find it to be much value.
I need a new stern rail anyway, so I’ll correct that when I rebuild the rail. It raises the shaft sufficiently out of the water at the 2nd lift notch so for now, I left it alone for this season
The best thing about the Honda is the 12Amp Alternator. Most others have 6Amp. Ric
Dadventure
’84 Continental
HBNY

Richard F. Stott, AIA, LEED AP
ric at stottarchitecture.com
O -631-283-1777
C- 516-965-3164



See the original archive post
×

Message to Webmaster:

To use your email application to send a messsage to the webmaster rather than this form, .



×

Post to the Rhodes 22 Email List:



×

Sending Post:

Your post is being sent... waiting