The Rhodes 22 Discussion Group R22 Discussion Group

The Rhodes 22 Discussion Group


< prior

Back to Month

Go to Thread

Member Picture

Bruce Greenwald



Electric motor mount vibration

2021-09-02; 18:27:40 EDT

Member Since

2003-03-03

Posts: 128

Jeff, I have a Yamaha 9.9 with a Yamaha remote control set up similar to what I understand  is Roger’s.  My prior R22 had the manual motor lift and I had no problem with clearances.  My current boat has the electric lift with the motor tiller connection which works fine except the wiring from the throttle to the motor prevents the motor from turning properly so I have just disconnected it. The mechanics always complain about the tight turns required of the cables but they work.  Without the tiller motor connection the lift and throttle work fine.  I have vibration but it comes from the hardware on the electric winch in the transom which I have tried to cushion but not with a lot of success.

Bruce Greenwald
S/V Ruach
Shelter Island NY

See the original archive post
×

Message to Webmaster:

To use your email application to send a messsage to the webmaster rather than this form, .



×

Post to the Rhodes 22 Email List:



×

Sending Post:

Your post is being sent... waiting