2021-10-14; 11:05:15 EDT
Member Since
2002-08-01
Posts: 1438
Hi All, It occurs to me that this standard mainsail to IMF mainsail switch is something that other owners might want to do. We should document the factory forestay lengths to facilitate this switch. For the record, the pin centerline to pin centerline distance on the forestay on my 1976 standard mainsail Rhodes 22 is 333.625 inches. Would somebody with a factory installation of the IMF mainsail make the analogous measurement of their forestay? Roger Pihlaja S/V Dynamic Equilibrium Sent from Mail<https://go.microsoft.com/fwlink/?LinkId=550986> for Windows From: Roger Pihlaja<mailto:ROGER_PIHLAJA at MSN.COM> Sent: Thursday, October 14, 2021 10:40 AM To: The Rhodes 22 Email List<mailto:rhodes22-list at rhodes22.org> Subject: Re: [Rhodes22-list] Switching from standard mast to IMF Mitch and Stephen, The standard mainsail has more roach vs the IMF mainsail. If you drew a straight line from the head to the clew on the mainsail, the sail area aft of this line is called the roach. Roach sail area requires battens to prevent it from curling to leeward. Since IMF mainsails have no battens, they can’t have much roach. Since the roach sail area is at the aft edge of the mainsail, it’s presence in the standard mainsail tends to move the Ce of the sail plan aft, thus increasing weather helm. All else being equal, the IMF mainsail would need to have more mast rake to compensate for the lack of roach and restore neutral helm. ( i.e. needs a longer forestay ) If you used a standard mainsail forestay with an IMF mainsail, this analysis would predict lee helm, exactly what you experienced. Roger Pihlaja S/V Dynamic Equilibrium Sent from my iPhoneSee the original archive post