I use 3-strand rodes which are flaked into 2-gallon paint buckets from HD stored in my lazarette. My main fluke anchor and chain is hung from the bow pulpit. The spare anchor is stored in the lazarette. I have a climbers locking caribiner on the end of each rode for quick connection to the anchor. I cut an exit hole in each bucket for the bitter end bowline. This has worked quite well.
Michael McKay
(630) 209-2054 (m)
Sent from my iPhone
> On Nov 15, 2021, at 4:58 PM, Peter Nyberg <peter at sunnybeeches.com> wrote:
>> I'm not sure of the source, but somewhere I developed the firm opinion that only 3-strand line should be used for anchor rodes and dock lines. Other types of lines, specifically double-braid, did not have enough stretch or elasticity for these applications.
>> In reading posts on another forum (sorry), and doing a bit of research, I find that this firmly held opinion is quite incorrect.
>> It seems there are double braided lines made specifically for anchor rodes and dock lines. There is also something sort of in between double-braided and 3-strand, called 8-plait, of which I was entirely unaware.
>> One of the reasons this new information caught my attention is that both double-braid and 8-plaint are much more flexible than 3 strand, and will fall into an anchor rode locker (or bag) more easily.
>> One of the short comings of my anchoring system, in which anchor rode is stored in bags in the aft corners of the lazaret, is that feeding the 3-strand rode down into the bags can sometimes be a somewhat fiddly process. A more flexible type of line would almost certainly improve things.
>> For those unfamiliar with and curious about my anchor system, relevant YouTube videos can be found here: https://youtu.be/GheL7_fhpGo and here: https://youtu.be/VeL_3Ir0yQ4>> Peter Nyberg
> Coventry, CT
> s/v Silverheels (1988/2016)
>
×
Message to Webmaster:
To use your email application to send a messsage to the webmaster rather than this form,
.