> On Dec 7, 2021, at 11:50 PM, Reuben Mezrich <reuben.mezrich at gmail.com> wrote:
>> Glad you mentioned this… I was just going to use sheet mettal screws
>> Reuben Mezrich
> Cell: 410-499-8922
>>> On Dec 7, 2021, at 6:10 PM, Jesse Shumaker <jesse.laten.shumaker at gmail.com> wrote:
>>>> Peter, thanks for getting back to Rueben with the details. I used the same
>> block that you mentioned. It's been busy at work recently, hence my slow
>> responses. Rueben, you're probably already tracking on this, but I had to
>> tap the threads in the boom for the screws on the cheek block.
>>>> Jesse
>>>>> On Tue, Dec 7, 2021 at 3:38 PM Reuben Mezrich <reuben.mezrich at gmail.com>
>>> wrote:
>>>>>> Thanks again
>>>>>> Reuben Mezrich
>>> Cell: 410-499-8922
>>>>>>>>> On Dec 7, 2021, at 4:11 PM, Peter Nyberg <peter at sunnybeeches.com> wrote:
>>>>>>>>>> Reuben,
>>>>>>>>>> The block at the end of the boom is a cheek block. I'm pretty sure the
>>> specific model is a Ronstan 20mm (Ronstan model #RF20151, Defender item
>>> #614283). I don't recall the size of the screws used. I'd guess #6, but
>>> it might have been #8. Length would be 1/2" or 3/4". Using screws a bit
>>> longer than necessary in this location wouldn't adversely affect anything.
>>>>>>>> --Peter
>>>>>>>>> On 2021-12-07, at 01:40:55 EST, Reuben Mezrich wrote:
>>>>>>>>>> If I might ask two more questions....
>>>>> What kind and size block is used at the end of the mast to turn the
>>> outhaul line
>>>>> back to the mast?
>>>>> If screws are used to hold it....what size?
>>>>> Thanks
>>>>> --Reuben
>>>>> Reuben Mezrich
>>>>> Pelican Cove in Sarasota and Back Bay, Boston
>>>>> Cell: 410-499-8922
>>>>>>>>>>>>>>>>>>>>>>
×
Message to Webmaster:
To use your email application to send a messsage to the webmaster rather than this form,
.