The Rhodes 22 Discussion Group R22 Discussion Group

The Rhodes 22 Discussion Group


< prior

Back to Month

Go to Thread

Member Picture

ROGER PIHLAJA



Rhodes 22 in St. Maarten

2022-01-07; 13:01:22 EST

Member Since

2002-08-01

Posts: 1438

Hi Rob,

My ‘76 is setup just like yours with a single thru hull and the bilge pump and galley sink plumbed to it.  Minimizing the number of thru hulls is always a good idea.  However, it’s not considered good practice to plumb grey water like a sink drain or a bilge pump together with raw sewage, hence the 2 separate thru hulls.

As long as there is a siphon break loop, the height above the waterline of the thru hulls is OK.  Even on our boats, on port tack, the thru hull can be submerged and there is a potential to siphon water back into the cabin.

Roger Pihlaja
S/V Dynamic Equilibrium

Sent from my iPhone

See the original archive post
×

Message to Webmaster:

To use your email application to send a messsage to the webmaster rather than this form, .



×

Post to the Rhodes 22 Email List:



×

Sending Post:

Your post is being sent... waiting