The Rhodes 22 Discussion Group R22 Discussion Group

The Rhodes 22 Discussion Group


< prior

Back to Month

Go to Thread

Member Picture

Michael McKay



Tiller Pilot Recommendations

2022-02-02; 14:01:54 EST

Member Since

2020-11-17

Posts: 211

Hi Peter,

I do have Bill's writeup, as well as Roger's email describing his Tiller Pilot installation.  My boat has speed and depth transducers in the lazarette, so the pathway into the coaming is already present.

Since I will be drilling holes in my boat for the first time, I want to make sure my plan sounds reasonable based on your experience.  I intend to install the electrical socket for the Tiller Pilot in the starboard coaming pocket.  I will also install a 12V socket there as well.  Since these will be relatively small holes I am guessing that I will need to use a fish tape or something like that to get the wiring from the electric panel connection to that hole.  Is that how you did it?

I'm also hoping that my gunnel is thick enough so I don't have to reinforce the Tiller Pilot mounting socket from underneath.  If that is not the case, I believe I can reach that point from inside the lazarette.  Is that what you did to put the hardwood backing block in Silverheels?

Thanks for all you help and for the amazing library of videos you have shared with our community.


Mike McKay
s/v Liber (2006/2018)
Allatoona Lake
Acworth, GA





See the original archive post
×

Message to Webmaster:

To use your email application to send a messsage to the webmaster rather than this form, .



×

Post to the Rhodes 22 Email List:



×

Sending Post:

Your post is being sent... waiting