2022-03-18; 13:49:22 EDT
Member Since
2020-11-17
Posts: 211
Hi All, Now that I've been sailing my Rhodes for about a year, I'm starting to focus on getting the best performance out of her. While I mostly sail for fun, I do race every couple of weeks and want to be more competitive. In particular, I have found that she does not go to windward very well for me. I have a 130 genoa and the IMF mainsail. Until very recently, I have been routing the jib sheets outside of the outer shrouds and handrails. That limits how much I can trim the genoa. Consequently, I can only tack through about 100-120o. Recently, I tried running the jib sheets between the outer shrouds and the inner shrouds. That definitely improved my pointing ability significantly at the expense of less than optimal headsail shape on some off wind points of sail. However, this configuration lets me use my jib cars to adapt to wind strength and whether or not I am partially reefed. I think this will retain the ability to use a whisker pole on downwind legs. I did briefly try both of the inboard jib sheet fairlead/cleat alternatives but using those would seem to require having a second set of jib sheets and probably going on the foredeck to switch between them after rounding a mark (I often race solo). Also, those options eliminate the ability to control the sheeting angle to the clew with the jib cars. I'd greatly appreciate your thoughts and comments about what you have learned about how to optimize your boat's performance. Thanks, Mike McKay s/v Liber (2006/2018) Allatoona Lake Acworth, GASee the original archive post