2022-03-22; 13:49:57 EDT
Member Since
2008-12-25
Posts: 1035
Hi Roger, Again, you have it backwards. The forestay length is taken with the mast free standing and prevented from falling by the 4 lower stays and shrouds. Putting undue stress on the step with a too-short forestay buys nothing but maintenance headache. That the mast does not pivot when rigged should be evident to you when you lower it because you have to give it a good shove to get it started. That shove slides the aft edge of the foot forward on the step plate, raising the turning bolt in its vertical slot. As often discussed on this list, sometimes the mast step plate tears loose and no pivot occurs. Pulling on the screws attaching the step by an overly tight forestay contributes to this problem by opening space for water to run down the screws and rot the wooden mast step base. Regards, Rick LangeSee the original archive post