The Rhodes 22 Discussion Group R22 Discussion Group

The Rhodes 22 Discussion Group


< prior

Back to Month

Go to Thread

Member Picture

ROGER PIHLAJA



Jib Sheet track replacement.

2022-03-27; 19:35:57 EDT

Member Since

2002-08-01

Posts: 1438

Hi Thomas,

I noticed the same thing back when I first got my Rhodes 22 back in 1987.  I just backed the screws out one by one, installed longer screws into the same holes, and then installed SS fender washers and nylock nuts onto the longer threads.  In effect, my genoa track is now thru bolted and the fender washers serve as backing plates.  If the backside under the gunnel isn’t smooth; then, grind off the blobs of FRP under the gunnels while the screw is out.  I’ve never had any issues with the genoa tracks in the 25 years since then.

Roger Pihlaja
S/V Dynamic Equilibrium

Sent from Mail<https://go.microsoft.com/fwlink/?LinkId=550986> for Windows

From: THOMAS POLISE via Rhodes22-list<mailto:rhodes22-list at rhodes22.org>
Sent: Saturday, March 26, 2022 1:09 PM
To: rhodes22-list at rhodes22.org<mailto:rhodes22-list at rhodes22.org>
Subject: [Rhodes22-list] Jib Sheet track replacement.

If this is going out twice please excuse me. This is a photo of jib track screws protruding through underside of deck with no nuts or blocks.   I’m replacing the jib track and noticed that screws are just epoxied into deck. Are all Rhodes made like this and has anyone ever replaced?  If so what type of epoxy should I use?   Has anyone put blocking underneath, which seems like a difficult task?


View recent photos.png
-------------- next part --------------

See the original archive post
×

Message to Webmaster:

To use your email application to send a messsage to the webmaster rather than this form, .



×

Post to the Rhodes 22 Email List:



×

Sending Post:

Your post is being sent... waiting