> On May 18, 2022, at 11:20 PM, Chris Geankoplis <chrisgeankoplis at gmail.com> wrote:
>> Good idea to replace the bolt and unlock nut. You do not need to remove the
> IMF tube to do this. Use all new bolts and nut. I reused the old nylock
> nut and lost the spreader in a squall, damn near lost the mast. Alice was
> not so happy. I had to use a boat hook to re tension the port shroud and
> limp into the marina in Elba, see picture.
>> The shims you can make if you can’t get them from Stan.
>>> On Wed, May 18, 2022 at 1:45 PM DAVID BERG via Rhodes22-list <
>>rhodes22-list at rhodes22.org> wrote:
>>>> Good afternoon,
>>>> I need to replace the tapered washers and possibly the bolts for my
>> spreaders. I only inspected briefly, and in the rain, but it appears that
>> the IMF must be removed to do this work. I'm assuming these are Dwyer
>> parts.
>>>> I also need a new spring detent pin, or whatever you call the thing that
>> releases the pop top carriage (or the boom carriage for that matter).
>>>> Any advice would be greatly appreciated.
>>>> David Berg
>> Blue Loon
>> Minneapolis
>>>>>> -------------- next part --------------
>> A non-text attachment was scrubbed...
>> Name: image2.jpeg
>> Type: image/jpeg
>> Size: 58230 bytes
>> Desc: not available
>> URL: <
>>http://rhodes22.org/pipermail/rhodes22-list/attachments/20220518/998f9621/attachment.jpeg>>>>>> -------------- next part --------------
> A non-text attachment was scrubbed...
> Name: image_6483441.JPG
> Type: image/jpeg
> Size: 597188 bytes
> Desc: not available
> URL: <http://rhodes22.org/pipermail/rhodes22-list/attachments/20220518/1452aa10/attachment.jpe>
×
Message to Webmaster:
To use your email application to send a messsage to the webmaster rather than this form,
.