The Rhodes 22 Discussion Group R22 Discussion Group

The Rhodes 22 Discussion Group


< prior

Back to Month

Go to Thread

Member Picture

Jesse Shumaker



Pop too hard enclosure

2022-05-19; 18:33:23 EDT

Member Since

2019-06-04

Posts: 463

I store my homemade cockpit filler planks vertically on the port side behind the cockpit bench against the hull, and butting up against the cabin.  I added some mounts to keep everything in place and it seems to work well.  They are out of the way and it allows for more storage containers since there's still plenty of room right under the bench.  Since I took these photos, I've added some thin HDPE pieces along the bottom to keep the wood off the cockpit sole and let water drain.  See attachment for the setup.  Perhaps Chris is referring to a similar setup.  I don't use the cockpit filler planks often so it's not a big deal to dig them out occasionally, but I wouldn't want to have to do that for every sail and it sounds like you might use your enclosure frequently.

Jesse


storage.JPG
See the original archive post
×

Message to Webmaster:

To use your email application to send a messsage to the webmaster rather than this form, .



×

Post to the Rhodes 22 Email List:



×

Sending Post:

Your post is being sent... waiting