The Rhodes 22 Discussion Group R22 Discussion Group

The Rhodes 22 Discussion Group


< prior

Back to Month

Go to Thread

Member Picture

Mark Whipple



Sealing hull to deck gaps

2022-06-29; 13:35:53 EDT

Member Since

2019-10-09

Posts: 120

From Practical Sailor:

Silicone caulk is notorious for wreaking havoc with the adhesion of sealants and paint. In fact, you will probably find that new silicone bedding does not bond well to surfaces that have been supposedly scrubbed clean. The trouble is that old silicone can be deeply embedded in the pores of gelcoat and wood, invisible to the naked eye.

https://www.practical-sailor.com/boat-maintenance/ps-tests-adhesive-removers

and

Many companies, including Pettit—who have launched a new line of caulks, <https://pettitpaint.com/products/sealants-adhesives/>offer new
UV-resistant and paintable polyether blends that can be used in lieu of silicone, which has a reputation of leaving behind invisible residue that can interfere with the adhesion of subsequent coatings of paint or varnish on the bedded fitting, or even on the adjacent surfaces. If you have to remove silicone or remove stubbornly adhered polyurethane caulk like 3M 5200, check out our Practical Sailor’s test of adhesive removers <https://www.practical-sailor.com/boat-maintenance/ps-tests-adhesive-removers>
.

https://www.practical-sailor.com/blog/the-right-caulk-for-your-boat

I can confirm from experience that it can be nearly impossible to get anything to seal to surfaces that were previously exposed to silicone caulk. I've had to use a digester solution to remove the silicone from the gelcoat.

Mark

Boston, MA

2000 R22 *Luna Mia*


See the original archive post
×

Message to Webmaster:

To use your email application to send a messsage to the webmaster rather than this form, .



×

Post to the Rhodes 22 Email List:



×

Sending Post:

Your post is being sent... waiting