On Tue, Oct 25, 2022, 4:54 PM Todd Tavares <tavares0947 at gmail.com> wrote:
> Sorry.
>>> On Tue, Oct 25, 2022, 4:54 PM Todd Tavares <tavares0947 at gmail.com> wrote:
>>> More pics.
>>>> On Tue, Oct 25, 2022, 4:52 PM Todd Tavares <tavares0947 at gmail.com> wrote:
>>>>>>>> If it's the old style GB furler, I've made a couple of bearings from
>>> Delrin rod stock I got off ebay.
>>> Here are a few pics of furlers I have out back in the woods behind the
>>> house. Ed K used to call it Edenton North because I've had several Rhodes
>>> 22s and have tons of parts.
>>> I made the black one and one of the white ones.
>>> I'll have to send the pics in a couple of replies because of the file
>>> sizes.
>>>>>> On Mon, Oct 24, 2022, 2:37 PM Stephen Staum <snstaum at gmail.com> wrote:
>>>>>>> Frank,
>>>>>>>> I had the same problem a few years ago on the Carol Lee 2. The piece
>>>> fell
>>>> off while we were sailing and it was hard to roll the genoa. Since the
>>>> boat was on the mooring midseason I needed a quick easy fix. After
>>>> removing the remaining 1/2 plate I bought a cap for 1/2" PVC pipe
>>>> (available at any good hardware store). I drilled a hole in the middle
>>>> of
>>>> the cap approximately 1/8" wide to accommodate the forestay. I cut the
>>>> cap
>>>> in half so I could place it over the forestay with the genoa assembly
>>>> lifted up a few inches. I also sliced a 4" piece of 3/8" ID nylobraid
>>>> (reinforced flexible pvc tubing - also available in a good hardware
>>>> store)
>>>> and slid it over the forestay above the cap. The split cap was then
>>>> secured with a stainless steel hose clamp (available guess where?) The
>>>> nylobraid was slid into the cap and into the furler pipe acting as a
>>>> pivot
>>>> point and centering bearing. All the materials cost less than $5 and it
>>>> worked so well that I kept it that way and sold the boat years later
>>>> with a
>>>> spare split cap on board to use when the old one wears out. The cap
>>>> rests
>>>> on the top of the forestay crimped fitting and the whole assembly
>>>> pivots on
>>>> it. Call me if you need a better explanation of this easy fix. Email
>>>> directly for my number.
>>>>>>>> * Thanks and Stay Well,*
>>>>>>>> *Stephen Staum*
>>>> *s/v Pinafore*
>>>>>>>> *Needham, MA*
>>>>>>>>>>>>>>>> On Sun, Oct 23, 2022 at 8:08 AM Frank Goldsmith <goldsmith.cf at gmail.com>>>> >
>>>> wrote:
>>>>>>>> > Listmates,
>>>> >
>>>> > The bottom end of the roller furling apparatus on my Rhodes has
>>>> suffered
>>>> > damage, as shown in the attached photos. Does anyone know where I can
>>>> > obtain a replacement for the black circular part that has broken in
>>>> half?
>>>> > And does anyone know what materials it is made of, in case I can find
>>>> > someone to make a replacement? Possibly Delrin?
>>>> >
>>>> > I’m happy to order a new part from Stan, of course, if that’s an
>>>> option.
>>>> >
>>>> > Thanks,
>>>> >
>>>> > Frank
>>>> >
>>>> > Frank Goldsmith
>>>> > S/V Mary Bess (Rhodes 22 1985/2001)
>>>> > Fairview, NC
>>>> > Lake Keowee, SC
>>>> >
>>>> >
>>>> >
>>>> > -------------- next part --------------
>>>> > A non-text attachment was scrubbed...
>>>> > Name: IMG_2208.jpeg
>>>> > Type: image/jpeg
>>>> > Size: 68691 bytes
>>>> > Desc: not available
>>>> > URL: <
>>>> >
>>>>http://rhodes22.org/pipermail/rhodes22-list/attachments/20221023/d318e33e/attachment.jpeg>>>> > >
>>>> > -------------- next part --------------
>>>> > A non-text attachment was scrubbed...
>>>> > Name: IMG_2224.jpeg
>>>> > Type: image/jpeg
>>>> > Size: 97548 bytes
>>>> > Desc: not available
>>>> > URL: <
>>>> >
>>>>http://rhodes22.org/pipermail/rhodes22-list/attachments/20221023/d318e33e/attachment-0001.jpeg>>>> > >
>>>> >
>>>>>>>
×
Message to Webmaster:
To use your email application to send a messsage to the webmaster rather than this form,
.