The Rhodes 22 Discussion Group R22 Discussion Group

The Rhodes 22 Discussion Group


< prior

Back to Month

Go to Thread

Member Picture

Joe Dempsey



Mainsail furling has become difficult

2022-11-04; 12:06:33 EDT

Member Since

2022-05-14

Posts: 216

Just spray it into the slot downward below the boom. If you look at the photo. The donuts are about a foot below the foot of the sail. (Actually, much closer because the sail in the photo was manually furled on the furling tube prior to re-installing in the mast.)Also I don't recall if the "donuts" actually turn or if the furling tube rotates inside the donuts. Zoom into the second photo and see the white colored sleeves/bearings.In any event, best to do with the sail unfurled on a calm day spray the tube itself as well as the donuts. You're not going to have very good access but just hope you get the spray on the surfaces. There maybe somebody on the list that can add to this or have better information.The ideal or correct method would be with the mast down and pull out the furling tube.Hope this helps.Joe DempseySV RespiteDeltaville, VASent via the Samsung Galaxy S22 5G, an AT&T 5G smartphone

-920294591_IMG_20171103_1316243_5853046.jpg
See the original archive post
×

Message to Webmaster:

To use your email application to send a messsage to the webmaster rather than this form, .



×

Post to the Rhodes 22 Email List:



×

Sending Post:

Your post is being sent... waiting