2022-11-11; 18:27:45 EST
Member Since
2022-05-14
Posts: 216
It's one of two things: brakes (probably not if they're surge brakes) or bearings.1. Do you allow your wheels to cool before launching? If not, and they're still hot when you back into the water, the rapid cooling sucks water into the hub and onto the bearing capsule. 2. If your answer is "no" to 1 above, do you keep a grease gun with marine lube in your vehicle?3. If the answer is "yes" to 2 above, do you lube your hubs after launching or retrieving?4. If the answer is either "no to 2 above and/or "no" to 3 above, problem solved. It's your bearings and they've got to be replaced.The good news is you've got a two axle trailer so you can remove that wheel and take the trailer to a shop unless you are going to try and replace the bearings yourself. I DONT RECOMMEND THAT OPTION unless your a real good mechanic familiar with those bearing cups and seals that are special for boat trailers.Hope this helps.Joe DempseyS/V RespiteDeltaville, VASent via the Samsung Galaxy S22 5G, an AT&T 5G smartphoneSee the original archive post