2022-11-30; 17:11:30 EST
Member Since
2020-10-30
Posts: 113
What's the easiest way to remove gas from the fuel hose? The hose has a ball spring valve at both ends. I was told not to push the valve open with some type of tool because I could damage the valve. I disconnected the tank and put it in the lazarette and then reran the hose into the lazarette and reconnected the hose to the tank which opened the valve on that end. I then disconnected the hose from the outboard and held it up as high as I could (gravity) and squeezed the primer. The primer pumps gas in the opposite direction than I wanted but if you squeeze it hard and slow the gas will eventually drain into the tank. Seems like there must be a better way. The gas was ethanol-free with a stabilizer. Should I just leave it in the hose and hope I won't have any problems starting the outboard in the Spring? Lee 1999 Rhodes22 AT EASE Claytor Lake, VASee the original archive post