< prior
Back to Month
Go to Thread
2022-12-04; 12:07:31 EST
Member Since
2004-05-24
Posts: 586
Can we get more info? Is there an ad posted somewhere? Pictures? Where is the boat located? I may be in the market. *Thanks and Stay Well,* *Stephen Staum* *s/v Pinafore (I hope)* *Needham, MA*See the original archive post
On Sun, Dec 4, 2022 at 10:41 AM Scott McFall <scott at hypnosisconnection.com> wrote: > I am selling my 2008 Rhodes 22 if anyone is looking. I am wanting 17500. > Not sure if we do that in this feed or not > > > On Dec 4, 2022, at 10:38 AM, rhodes22-list-request at rhodes22.org wrote: > > > > Send Rhodes22-list mailing list submissions to > > rhodes22-list at rhodes22.org > > > > To subscribe or unsubscribe via the World Wide Web, visit > > http://rhodes22.org/mailman/listinfo/rhodes22-list > > or, via email, send a message with subject or body 'help' to > > rhodes22-list-request at rhodes22.org > > > > You can reach the person managing the list at > > rhodes22-list-owner at rhodes22.org > > > > When replying, please edit your Subject line so it is more specific > > than "Re: Contents of Rhodes22-list digest..." > > > > > > Today's Topics: > > > > 1. Re: Curved Rudder | 84 Rhodes 22 (jpd9668) > > 2. Re: Curved Rudder | 84 Rhodes 22 (jpd9668) > > 3. Re: Curved Rudder | 84 Rhodes 22 (jpd9668) > > 4. Re: Curved Rudder | 84 Rhodes 22 (Chris on LBI) > > 5. Re: Curved Rudder | 84 Rhodes 22 (jpd9668 at gmail.com) > > 6. Re: Curved Rudder | 84 Rhodes 22 (ROGER PIHLAJA) > > 7. Re: Curved Rudder | 84 Rhodes 22 (Chris on LBI) > > 8. Re: Curved Rudder | 84 Rhodes 22 (Chris on LBI) > > 9. Re: Curved Rudder | 84 Rhodes 22 (jpd9668) > > 10. Re: Curved Rudder | 84 Rhodes 22 (Chris on LBI) > > 11. Removing Gas from Fuel Line (Lee Kuhn) > > 12. Re: Removing Gas from Fuel Line (Peter Nyberg) > > 13. Re: Removing Gas from Fuel Line (ROGER PIHLAJA) > > 14. Re: Removing Gas from Fuel Line (cjlowe at sssnet.com) > > 15. Re: Removing Gas from Fuel Line (Lee Kuhn) > > 16. Re: Curved Rudder | 84 Rhodes 22 (Chris on LBI) > > 17. Re: Curved Rudder | 84 Rhodes 22 (Mary Lou Troy) > > 18. Re: Curved Rudder | 84 Rhodes 22 (Todd Tavares) > > > > > > ---------------------------------------------------------------------- > > > > Message: 1 > > Date: Sat, 26 Nov 2022 09:03:58 -0500 > > From: jpd9668 <jpd9668 at gmail.com> > > To: The Rhodes 22 Email List <rhodes22-list at rhodes22.org> > > Subject: Re: [Rhodes22-list] Curved Rudder | 84 Rhodes 22 > > Message-ID: <63821cdb.020a0220.9bd25.399c at mx.google.com> > > Content-Type: text/plain; charset="utf-8" > > > > I don't know what definition of curve is, but there is none unless it's > in the plane of the surface which is probably the result of the layup of > the fibreglass.Sent via the Samsung Galaxy S22 5G, an AT&T 5G smartphone > > -------- Original message --------From: ROGER PIHLAJA < > roger_pihlaja at msn.com> Date: 11/25/22 5:48 PM (GMT-05:00) To: The > Rhodes 22 Email List <rhodes22-list at rhodes22.org> Subject: Re: > [Rhodes22-list] Curved Rudder | 84 Rhodes 22 Bob,I agree with Peter.? If > there are any differences between the two rudders, they are not readily > apparent in the photos.? Is there any measurable difference in parameters > like maximum thickness, chord length from the leading edge to point of > maximum thickness, etc?? Is there any asymetery in the curvature of the > hydrofoil on each side? Both rudders appear to be straight.? What do you > mean by ?curved??Roger PihlajaS/V Dynamic EquilibriumSent from my iPhone> > On Nov 25, 2022, at 5:26 PM, Peter Nyberg <peter at sunnybeeches.com> > wrote:> > ?Bob,> > You seem happy with your new rudder, and so I'm happy > for you as well, but those two rudders look pretty much the same to me.> > > --Peter> >> On 2022-11-25, at 17:09:29 EST, C. Robert Lester wrote:>> >> > I'm the > > new owner of a rudder off an '82 R22.>> Cannot wait to sail / race next > sailing season.>> Took some pics of my '84 Rudder (curved, black/red) and > '82 Rudder (white) side >> by side. >> The boats are only 2 years apart but > the rudder heads as well as the rudders are >> not similar at all. >> I was > going to buy the '82 stern rail as well but that is even a different mount > >> and size from my '84. >> Comments, questions?>> >> Thanks all,>> Bob>> > '84 ORION>> >> >> >> >> <a >> href=" > https://na01.safelinks.protection.outlook.com/?url=http%3A%2F%2Frhodes22.org%2Fpipermail%2Frhodes22-list%2Fattachments%2F20221125%2F10ad9055%2Fattachment.jpg&data=05%7C01%7C%7Cd09861f000784a7cb42808dacf340f30%7C84df9e7fe9f640afb435aaaaaaaaaaaa%7C1%7C0%7C638050119754738534%7CUnknown%7CTWFpbGZsb3d8eyJWIjoiMC4wLjAwMDAiLCJQIjoiV2luMzIiLCJBTiI6Ik1haWwiLCJXVCI6Mn0%3D%7C3000%7C%7C%7C&sdata=2%2FlYlSVnEpTnaNqcJ6KcohYH5Mp6bJicXQXi5es2bCg%3D&reserved=0" > >> target="_blank">Rudder 1a.jpg</a> >> >> <a > >>> href=" > https://na01.safelinks.protection.outlook.com/?url=http%3A%2F%2Frhodes22.org%2Fpipermail%2Frhodes22-list%2Fattachments%2F20221125%2F10ad9055%2Fattachment-0001.jpg&data=05%7C01%7C%7Cd09861f000784a7cb42808dacf340f30%7C84df9e7fe9f640afb435aaaaaaaaaaaa%7C1%7C0%7C638050119754738534%7CUnknown%7CTWFpbGZsb3d8eyJWIjoiMC4wLjAwMDAiLCJQIjoiV2luMzIiLCJBTiI6Ik1haWwiLCJXVCI6Mn0%3D%7C3000%7C%7C%7C&sdata=jb%2FqyXGnRhbl%2B96mT3YAC7z6k%2FGWx16Nu09%2Bv%2BBz3pU%3D&reserved=0" > >> target="_blank">Rudder 2a.jpg</a> >> >> <a >> href=" > https://na01.safelinks.protection.outlook.com/?url=http%3A%2F%2Frhodes22.org%2Fpipermail%2Frhodes22-list%2Fattachments%2F20221125%2F10ad9055%2Fattachment-0002.jpg&data=05%7C01%7C%7Cd09861f000784a7cb42808dacf340f30%7C84df9e7fe9f640afb435aaaaaaaaaaaa%7C1%7C0%7C638050119754738534%7CUnknown%7CTWFpbGZsb3d8eyJWIjoiMC4wLjAwMDAiLCJQIjoiV2luMzIiLCJBTiI6Ik1haWwiLCJXVCI6Mn0%3D%7C3000%7C%7C%7C&sdata=1gLAUSJD%2FLJHorQ5gSy79T%2B9EPYD3M5%2Bf6hkidjNvnY%3D&a > > mp;reserved=0" >> target="_blank">Rudder 3a.jpg</a> >> > > > > > ------------------------------ > > > > Message: 2 > > Date: Sat, 26 Nov 2022 09:10:09 -0500 > > From: jpd9668 <jpd9668 at gmail.com> > > To: The Rhodes 22 Email List <rhodes22-list at rhodes22.org> > > Subject: Re: [Rhodes22-list] Curved Rudder | 84 Rhodes 22 > > Message-ID: <63821e4f.020a0220.9bd25.39b5 at mx.google.com> > > Content-Type: text/plain; charset="utf-8" > > > > Well, that's not good. Its bent! Don't know what would cause that, but I > would think that it will affect performance through increased drag. Roger > would know better than I.?Sent via the Samsung Galaxy S22 5G, an AT&T 5G > smartphone > > -------- Original message --------From: "C. Robert Lester" < > C.Robert.Lester at dartmouth.edu> Date: 11/25/22 7:17 PM (GMT-05:00) To: > The Rhodes 22 Email List <rhodes22-list at rhodes22.org> Subject: Re: > [Rhodes22-list] Curved Rudder | 84 Rhodes 22 Thanks Peter.Forgive me for > not being able to capture the differences in shape with the first pics.Here > is the original pic that I posted. (Yes, that is snow on the ground when I > pulled her at end of season.).Note:Tiller handle was placed, > centerline.Rudder head at top you can see bolts & nuts both sides.Rudder is > twisted to port, but curved to Starboard.I hope this is helpful.Not the > pics yesterday show the "patches" of repair that were exposed by pressure > washing off the red and black paint this summer.Bob'84 Orion-----Original > Message-----From: Rhodes22-list <rhodes22-list-bounces at rhodes22.org> On > Behalf Of Peter NybergSent: Friday, November 25, 2022 5:26 PMTo: > rhodes22-list at rhodes22.orgSubject: Re: [Rhodes22-list] Curved Rudder | 84 > > Rhodes 22Bob,You seem happy with your new rudder, and so I'm happy for > you as well, but those two rudders look pretty much the same to me.--Peter> > On 2022-11-25, at 17:09:29 EST, C. Robert Lester wrote:>> I'm the new owner > of a rudder off an '82 R22.> Cannot wait to sail / race next sailing > season.> Took some pics of my '84 Rudder (curved, black/red) and '82 Rudder > > (white) side by side.> The boats are only 2 years apart but the rudder > heads as well as the > rudders are not similar at all.> I was going to buy > the '82 stern rail as well but that is even a > different mount and size > from my '84.> Comments, questions?> > Thanks all,> Bob> '84 ORION> > > > > > <a> href=" > https://nam12.safelinks.protection.outlook.com/?url=http%3A%2F%2Frhodes22.org%2Fpipermail%2Frhodes22-list%2Fattachments%2F20221125%2F10ad9055%2Fattachment.jpg&data=05%7C01%7Cc.robert.lester%40dartmouth.edu%7C91e9c5d0f0f848ba822108dacf340ef6%7C995b093648d640e5a31ebf689ec9446f%7C0%7C0%7C638050119769164077%7CUnk > > > nown%7CTWFpbGZsb3d8eyJWIjoiMC4wLjAwMDAiLCJQIjoiV2luMzIiLCJBTiI6Ik1haWwiLCJXVCI6Mn0%3D%7C3000%7C%7C%7C&sdata=jAH1SgjXpqNVYA9DFo%2BOaW51Yru7cRlFl1y%2Fk5WFwDs%3D&reserved=0" > > target="_blank">Rudder 1a.jpg</a>> > <a> href=" > https://nam12.safelinks.protection.outlook.com/?url=http%3A%2F%2Frhodes22.org%2Fpipermail%2Frhodes22-list%2Fattachments%2F20221125%2F10ad9055%2Fattachment-0001.jpg&data=05%7C01%7Cc.robert.lester%40dartmouth.edu%7C91e9c5d0f0f848ba822108dacf340ef6%7C995b093648d640e5a31ebf689ec9446f%7C0%7C0%7C638050119769164077%7CUnknown%7CTWFpbGZsb3d8eyJWIjoiMC4wLjAwMDAiLCJQIjoiV2luMzIiLCJBTiI6Ik1haWwiLCJXVCI6Mn0%3D%7C3000%7C%7C%7C&sdata=bhZbS3G14v5gWsMzgfXiKpbleK6dYLGM5Kfquowb1Kg%3D&reserved=0" > > target="_blank">Rudder 2a.jpg</a>> > <a> href=" > https://nam12.safelinks.protection.outlook.com/?url=http%3A%2F%2Frhodes22.org%2Fpipermail%2Frhodes22-list%2Fattachments%2F20221125%2F10ad9055%2Fattachment-0002.jpg&data=05%7C01%7Cc.robert.lester%40dartmouth.edu%7C9 > > > 1e9c5d0f0f848ba822108dacf340ef6%7C995b093648d640e5a31ebf689ec9446f%7C0%7C0%7C638050119769164077%7CUnknown%7CTWFpbGZsb3d8eyJWIjoiMC4wLjAwMDAiLCJQIjoiV2luMzIiLCJBTiI6Ik1haWwiLCJXVCI6Mn0%3D%7C3000%7C%7C%7C&sdata=vjTwF84WbZig1mFjUzfjKx6C0y9II68CqjER8ceXTfU%3D&reserved=0" > > target="_blank">Rudder 3a.jpg</a>> -------------- next part > --------------A non-text attachment was scrubbed...Name: Rudder 4a.jpgType: > image/jpegSize: 413162 bytesDesc: Rudder 4a.jpgURL: < > http://rhodes22.org/pipermail/rhodes22-list/attachments/20221126/a02587b5/attachment.jpg > > > > > > ------------------------------ > > > > Message: 3 > > Date: Sat, 26 Nov 2022 09:13:30 -0500 > > From: jpd9668 <jpd9668 at gmail.com> > > To: The Rhodes 22 Email List <rhodes22-list at rhodes22.org> > > Subject: Re: [Rhodes22-list] Curved Rudder | 84 Rhodes 22 > > Message-ID: <63821f0f.020a0220.9bd25.39be at mx.google.com> > > Content-Type: text/plain; charset="utf-8" > > > > ?I don't think there's any difference between 82 and 84 or any other > year rudders. Don't stigmatize '84 rudders!Sent via the Samsung Galaxy S22 > 5G, an AT&T 5G smartphone > > -------- Original message --------From: "C. Robert Lester" < > C.Robert.Lester at dartmouth.edu> Date: 11/25/22 9:31 PM (GMT-05:00) To: > The Rhodes 22 Email List <rhodes22-list at rhodes22.org> Subject: Re: > [Rhodes22-list] Curved Rudder | 84 Rhodes 22 Thanks Roger.Sailing the last > 10 yrs of ORION has been favored port tack, with a Catalina 22 rudder > tiller.It will be nice next season to see how this '82 rudder tacks?Bob'84 > ORION-----Original Message-----From: Rhodes22-list < > rhodes22-list-bounces at rhodes22.org> On Behalf Of ROGER PIHLAJASent: > Friday, November 25, 2022 8:33 PMTo: The Rhodes 22 Email List < > rhodes22-list at rhodes22.org>Subject: Re: [Rhodes22-list] Curved Rudder | > 84 Rhodes 22Hi Bob,OK, now I see what you mean.? Is that much misalignment > noticeable under sail??? Is the tiller position different to go straight > ahead on port tack vs starboard tack?Anyway, I don?t think there is any way > to fix that rudder blade.? So, you did the right thing to replace it.Roger > PihlajaS/V Dynami > > c EquilibriumSent from my iPhone> On Nov 25, 2022, at 7:17 PM, C. Robert > Lester <C.Robert.Lester at dartmouth.edu> wrote:> > ?Thanks Peter.> Forgive > me for not being able to capture the differences in shape with the first > pics.> Here is the original pic that I posted. (Yes, that is snow on the > ground when I pulled her at end of season.).> Note:> Tiller handle was > placed, centerline.> Rudder head at top you can see bolts & nuts both > sides.> Rudder is twisted to port, but curved to Starboard.> I hope this is > helpful.> Not the pics yesterday show the "patches" of repair that were > exposed by pressure washing off the red and black paint this summer.> Bob> > '84 Orion> > > -----Original Message-----> From: Rhodes22-list < > rhodes22-list-bounces at rhodes22.org> On Behalf Of > Peter Nyberg> Sent: > Friday, November 25, 2022 5:26 PM> To: rhodes22-list at rhodes22.org> > Subject: Re: [Rhodes22-list] Curved Rudder | 84 Rhodes 22> > Bob,> > You > seem happy with your new rudder, and so I'm happy for you > > as well, but those two rudders look pretty much the same to me.> > > --Peter> >> On 2022-11-25, at 17:09:29 EST, C. Robert Lester wrote:>> >> > I'm the new owner of a rudder off an '82 R22.>> Cannot wait to sail / race > next sailing season.>> Took some pics of my '84 Rudder (curved, black/red) > and '82 Rudder>> (white) side by side.>> The boats are only 2 years apart > but the rudder heads as well as the >> rudders are not similar at all.>> I > was going to buy the '82 stern rail as well but that is even a >> different > mount and size from my '84.>> Comments, questions?>> >> Thanks all,>> Bob>> > '84 ORION>> >> >> >> >> <a>> href=" > https://nam12.safelinks.protection.outlook.com/?url=http%3A%2F%2Frhodes22.org%2Fpipermail%2Frhodes22-list%2Fattachments%2F20221125%2F10ad9055%2Fattachment.jpg&data=05%7C01%7Cc.robert.lester%40dartmouth.edu%7C1dde6b93ce3d4e739c2d08dacf4e2bfa%7C995b093648d640e5a31ebf689ec9446f%7C0%7C0%7C638050231897795227%7CUnknown%7CTWFpbGZsb3d8eyJWIjoiMC4wLjAwMDAiLCJQIjoiV2 > > > luMzIiLCJBTiI6Ik1haWwiLCJXVCI6Mn0%3D%7C3000%7C%7C%7C&sdata=5%2FvGDzW4lyDlY8bxd8C0SnVIagsqenG%2FNl74DWRsU24%3D&reserved=0" > >> target="_blank">Rudder 1a.jpg</a>>> >> <a>> href=" > https://nam12.safelinks.protection.outlook.com/?url=http%3A%2F%2Frhodes22.org%2Fpipermail%2Frhodes22-list%2Fattachments%2F20221125%2F10ad9055%2Fattachment-0001.jpg&data=05%7C01%7Cc.robert.lester%40dartmouth.edu%7C1dde6b93ce3d4e739c2d08dacf4e2bfa%7C995b093648d640e5a31ebf689ec9446f%7C0%7C0%7C638050231897795227%7CUnknown%7CTWFpbGZsb3d8eyJWIjoiMC4wLjAwMDAiLCJQIjoiV2luMzIiLCJBTiI6Ik1haWwiLCJXVCI6Mn0%3D%7C3000%7C%7C%7C&sdata=6%2FVPk0Yz0raPaBiMYAaNVBCs6BuuLQqJ4yaULWKtmH8%3D&reserved=0" > >> target="_blank">Rudder 2a.jpg</a>>> >> <a>> href=" > https://nam12.safelinks.protection.outlook.com/?url=http%3A%2F%2Frhodes22.org%2Fpipermail%2Frhodes22-list%2Fattachments%2F20221125%2F10ad9055%2Fattachment-0002.jpg&data=05%7C01%7Cc.robert.lester%40dartmouth.edu%7C1dde6b93ce3d4e739c2d08dacf4e2bfa%7C995b0 > > > 93648d640e5a31ebf689ec9446f%7C0%7C0%7C638050231897795227%7CUnknown%7CTWFpbGZsb3d8eyJWIjoiMC4wLjAwMDAiLCJQIjoiV2luMzIiLCJBTiI6Ik1haWwiLCJXVCI6Mn0%3D%7C3000%7C%7C%7C&sdata=falg7p83u8J%2FJM8rsVG3WYzN2JmNaPn06t2a0pbB0bA%3D&reserved=0" > >> target="_blank">Rudder 3a.jpg</a>>> > > -------------- next part > -------------- A non-text attachment was > scrubbed...> Name: Rudder > 4a.jpg> Type: image/jpeg> Size: 413162 bytes> Desc: Rudder 4a.jpg> URL: < > https://nam12.safelinks.protection.outlook.com/?url=http%3A%2F%2Frhodes22.org%2Fpipermail%2Frhodes22-list%2Fattachments%2F20221126%2Fa02587b5%2Fattachment.jpg&data=05%7C01%7Cc.robert.lester%40dartmouth.edu%7C1dde6b93ce3d4e739c2d08dacf4e2bfa%7C995b093648d640e5a31ebf689ec9446f%7C0%7C0%7C638050231897795227%7CUnknown%7CTWFpbGZsb3d8eyJWIjoiMC4wLjAwMDAiLCJQIjoiV2luMzIiLCJBTiI6Ik1haWwiLCJXVCI6Mn0%3D%7C3000%7C%7C%7C&sdata=%2FfotS3oaMoPJ49l2BJvvTqJIHg7PKELw63aG5D1ORAY%3D&reserved=0 > > > > > > ------------------------------ > > > > Message: 4 > > Date: Tue, 29 Nov 2022 11:37:24 -0500 > > From: Chris on LBI <cknell at vt.edu> > > To: The Rhodes 22 Email List <rhodes22-list at rhodes22.org> > > Subject: Re: [Rhodes22-list] Curved Rudder | 84 Rhodes 22 > > Message-ID: <c5674348-daad-0878-9b7e-814b9df175c8 at vt.edu> > > Content-Type: text/plain; charset="utf-8"; Format="flowed" > > > > It is so interesting that to me that this topic just came up. I've been > > thinking about posting some late-season observations about my Rhodes > > that are closely related to this thread. > > > > After years of being frustrated with what I consider to be excessive lee > > helm, toward the end of this past season I noticed that the forward edge > > of my rudder was not vertical. It is much like the white rudder shown in > > Bob's photo. It kicks forward a little. In an attempt to rectify this, I > > changed how I was using the rudder down-haul. Rather than pull it tight, > > I eased off a bit allowing me to use the up-haul to make the leading > > edge of the rudder close to vertical. > > > > I only had the opportunity to try this twice before we had to take the > > boat out for the season, but in both outings, I was able to much more > > easily balance the helm and was able to tack very close to 90 degrees > > (something that eluded me on this boat since we purchased her). Attached > > is a diagram showing my track as I tested my ability to tack while > > sailing as close to the wind as I could. As you can see, the tacks were > > about 95 degrees. In the past I was generally closer to 110 degrees, so > > I consider this a great improvement. > > > > Also, prior to trying this adjustment with the rudder, we frequently had > > difficulty bringing the bow through the wind; we had to be very precise > > with our timing of releasing sheets. I did not have the opportunity to > > test the change in high wind conditions, but she seemed to be much more > > responsive to a turn to windward. > > > > I'll continue to experiment next year and spend more time working on a > > way to be sure that the leading edge of the rudder is truly vertical. > > > > Chris > > > > -------------- next part -------------- > > A non-text attachment was scrubbed... > > Name: IMG_4528.PNG > > Type: image/png > > Size: 460057 bytes > > Desc: not available > > URL: < > http://rhodes22.org/pipermail/rhodes22-list/attachments/20221129/2624e7f9/attachment.png > > > > > > ------------------------------ > > > > Message: 5 > > Date: Tue, 29 Nov 2022 13:13:33 -0500 > > From: <jpd9668 at gmail.com> > > To: "'The Rhodes 22 Email List'" <rhodes22-list at rhodes22.org> > > Subject: Re: [Rhodes22-list] Curved Rudder | 84 Rhodes 22 > > Message-ID: <000201d9041e$513b6fc0$f3b24f40$@gmail.com> > > Content-Type: text/plain; charset="utf-8" > > > > Chris, > > Yours is much different than my experience. Until Stan instructed me how > to use the downhaul on the rudder, I had severe lee helm. Once I pulled the > downhaul tight my helm has been balanced ever since. If you're getting 95 > deg. or less on point, that's pretty good. Do you have roller furling jib? > > > > Joe Dempsey > > S/V Respite > > Deltaville, VA > > > > -----Original Message----- > > From: Rhodes22-list <rhodes22-list-bounces at rhodes22.org> On Behalf Of > Chris on LBI > > Sent: Tuesday, November 29, 2022 11:37 AM > > To: The Rhodes 22 Email List <rhodes22-list at rhodes22.org> > > Subject: Re: [Rhodes22-list] Curved Rudder | 84 Rhodes 22 > > > > It is so interesting that to me that this topic just came up. I've been > thinking about posting some late-season observations about my Rhodes that > are closely related to this thread. > > > > After years of being frustrated with what I consider to be excessive lee > helm, toward the end of this past season I noticed that the forward edge of > my rudder was not vertical. It is much like the white rudder shown in Bob's > photo. It kicks forward a little. In an attempt to rectify this, I changed > how I was using the rudder down-haul. Rather than pull it tight, I eased > off a bit allowing me to use the up-haul to make the leading edge of the > rudder close to vertical. > > > > I only had the opportunity to try this twice before we had to take the > boat out for the season, but in both outings, I was able to much more > easily balance the helm and was able to tack very close to 90 degrees > (something that eluded me on this boat since we purchased her). Attached is > a diagram showing my track as I tested my ability to tack while sailing as > close to the wind as I could. As you can see, the tacks were about 95 > degrees. In the past I was generally closer to 110 degrees, so I consider > this a great improvement. > > > > Also, prior to trying this adjustment with the rudder, we frequently had > difficulty bringing the bow through the wind; we had to be very precise > with our timing of releasing sheets. I did not have the opportunity to test > the change in high wind conditions, but she seemed to be much more > responsive to a turn to windward. > > > > I'll continue to experiment next year and spend more time working on a > way to be sure that the leading edge of the rudder is truly vertical. > > > > Chris > > > > -------------- next part -------------- > > A non-text attachment was scrubbed... > > Name: IMG_4528.PNG > > Type: image/png > > Size: 460057 bytes > > Desc: not available > > URL: < > http://rhodes22.org/pipermail/rhodes22-list/attachments/20221129/2624e7f9/attachment.png > > > > > > > > > > ------------------------------ > > > > Message: 6 > > Date: Tue, 29 Nov 2022 19:55:21 +0000 > > From: ROGER PIHLAJA <roger_pihlaja at msn.com> > > To: The Rhodes 22 Email List <rhodes22-list at rhodes22.org> > > Subject: Re: [Rhodes22-list] Curved Rudder | 84 Rhodes 22 > > Message-ID: > > < > CY8PR10MB6683D4528620D2943A4CEFFF80129 at CY8PR10MB6683.namprd10.prod.outlook.com > > > > > > Content-Type: text/plain; charset="utf-8" > > > > Chris, > > > > After reading your post, I went out and looked my boat?s rudder. On my > R-22, the rudder blade pivots until it comes up against the underside of > the rudder head. On my boat, the leading edge of the rudder blade makes a > straight line with the leading edge of the rudder head when the rudder > blade is all the way down against this positive mechanical stop. However, > there are several manufacturing tolerances that can affect this geometry. > The exact size and shape of the rudder head and rudder blade relative to > the location of the rudder blade?s pivot are critical. If your rudder > blade pivots too far forward, probably the easiest way to fix it will be to > install a shim in between the bottom of the rudder head and the top of the > rudder blade. > > > > I know from experience; that, pivoting the rudder blade up tends to > increase weather helm. But, in my experience, the helm is not that > sensitive to this adjustment, especially when the rudder blade is nearly > fully down. How much did you have to move the rudder blade in order to get > rid of your lee helm? > > > > By the way, what was your angle of heel when you were doing your tacking > angle experiment? As you may know, the wetted surface area of the R-22 > hull becomes very asymmetric as the hull heels over. The asymmetry tends > to produce weather helm, becoming more pronounced as the angle of heel > increases. You may find your boat has lee helm when sailed flat, > transitioning to neutral helm, and then weather helm as you heel over. > Before you modify your rudder, be certain you are not introducing heavy > weather helm when the boat?s rail is in the water. > > > > Roger Pihlaja > > S/V Dynamic Equilibrium > > > > Sent from my iPhone > >> On Nov 29, 2022, at 1:13 PM, jpd9668 at gmail.com wrote: > >> > >> ?Chris, > >> Yours is much different than my experience. Until Stan instructed me > how to use the downhaul on the rudder, I had severe lee helm. Once I pulled > the downhaul tight my helm has been balanced ever since. If you're getting > 95 deg. or less on point, that's pretty good. Do you have roller furling > jib? > >> > >> Joe Dempsey > >> S/V Respite > >> Deltaville, VA > >> > >> -----Original Message----- > >> From: Rhodes22-list <rhodes22-list-bounces at rhodes22.org> On Behalf Of > Chris on LBI > >> Sent: Tuesday, November 29, 2022 11:37 AM > >> To: The Rhodes 22 Email List <rhodes22-list at rhodes22.org> > >> Subject: Re: [Rhodes22-list] Curved Rudder | 84 Rhodes 22 > >> > >> It is so interesting that to me that this topic just came up. I've been > thinking about posting some late-season observations about my Rhodes that > are closely related to this thread. > >> > >> After years of being frustrated with what I consider to be excessive > lee helm, toward the end of this past season I noticed that the forward > edge of my rudder was not vertical. It is much like the white rudder shown > in Bob's photo. It kicks forward a little. In an attempt to rectify this, I > changed how I was using the rudder down-haul. Rather than pull it tight, I > eased off a bit allowing me to use the up-haul to make the leading edge of > the rudder close to vertical. > >> > >> I only had the opportunity to try this twice before we had to take the > boat out for the season, but in both outings, I was able to much more > easily balance the helm and was able to tack very close to 90 degrees > (something that eluded me on this boat since we purchased her). Attached is > a diagram showing my track as I tested my ability to tack while sailing as > close to the wind as I could. As you can see, the tacks were about 95 > degrees. In the past I was generally closer to 110 degrees, so I consider > this a great improvement. > >> > >> Also, prior to trying this adjustment with the rudder, we frequently > had difficulty bringing the bow through the wind; we had to be very precise > with our timing of releasing sheets. I did not have the opportunity to test > the change in high wind conditions, but she seemed to be much more > responsive to a turn to windward. > >> > >> I'll continue to experiment next year and spend more time working on a > way to be sure that the leading edge of the rudder is truly vertical. > >> > >> Chris > >> > >> -------------- next part -------------- > >> A non-text attachment was scrubbed... > >> Name: IMG_4528.PNG > >> Type: image/png > >> Size: 460057 bytes > >> Desc: not available > >> URL: < > https://na01.safelinks.protection.outlook.com/?url=http%3A%2F%2Frhodes22.org%2Fpipermail%2Frhodes22-list%2Fattachments%2F20221129%2F2624e7f9%2Fattachment.png&data=05%7C01%7C%7C14e50c603e664400598208dad235763f%7C84df9e7fe9f640afb435aaaaaaaaaaaa%7C1%7C0%7C638053424313125675%7CUnknown%7CTWFpbGZsb3d8eyJWIjoiMC4wLjAwMDAiLCJQIjoiV2luMzIiLCJBTiI6Ik1haWwiLCJXVCI6Mn0%3D%7C3000%7C%7C%7C&sdata=sddmh3HKnm78KH1y%2BWXGh63%2Fqy8FvY4X1TDKohWJ1Ng%3D&reserved=0 > > > >> > > > > ------------------------------ > > > > Message: 7 > > Date: Tue, 29 Nov 2022 23:25:59 -0500 > > From: Chris on LBI <cknell at vt.edu> > > To: The Rhodes 22 Email List <rhodes22-list at rhodes22.org> > > Subject: Re: [Rhodes22-list] Curved Rudder | 84 Rhodes 22 > > Message-ID: <b482d3ee-6fbb-a590-0f60-6b2eccf7982f at vt.edu> > > Content-Type: text/plain; charset=UTF-8; format=flowed > > > > Joe, > > I do have a roller furling jib. On this particular day, when I was > > experimenting, I had my 130 genoa unfurled to the upper shrouds. > > Chris > > > > On 11/29/2022 1:13 PM, jpd9668 at gmail.com wrote: > >> Chris, > >> Yours is much different than my experience. Until Stan instructed me > how to use the downhaul on the rudder, I had severe lee helm. Once I pulled > the downhaul tight my helm has been balanced ever since. If you're getting > 95 deg. or less on point, that's pretty good. Do you have roller furling > jib? > >> > >> Joe Dempsey > >> S/V Respite > >> Deltaville, VA > >> > >> -----Original Message----- > >> From: Rhodes22-list <rhodes22-list-bounces at rhodes22.org> On Behalf Of > Chris on LBI > >> Sent: Tuesday, November 29, 2022 11:37 AM > >> To: The Rhodes 22 Email List <rhodes22-list at rhodes22.org> > >> Subject: Re: [Rhodes22-list] Curved Rudder | 84 Rhodes 22 > >> > >> It is so interesting that to me that this topic just came up. I've been > thinking about posting some late-season observations about my Rhodes that > are closely related to this thread. > >> > >> After years of being frustrated with what I consider to be excessive > lee helm, toward the end of this past season I noticed that the forward > edge of my rudder was not vertical. It is much like the white rudder shown > in Bob's photo. It kicks forward a little. In an attempt to rectify this, I > changed how I was using the rudder down-haul. Rather than pull it tight, I > eased off a bit allowing me to use the up-haul to make the leading edge of > the rudder close to vertical. > >> > >> I only had the opportunity to try this twice before we had to take the > boat out for the season, but in both outings, I was able to much more > easily balance the helm and was able to tack very close to 90 degrees > (something that eluded me on this boat since we purchased her). Attached is > a diagram showing my track as I tested my ability to tack while sailing as > close to the wind as I could. As you can see, the tacks were about 95 > degrees. In the past I was generally closer to 110 degrees, so I consider > this a great improvement. > >> > >> Also, prior to trying this adjustment with the rudder, we frequently > had difficulty bringing the bow through the wind; we had to be very precise > with our timing of releasing sheets. I did not have the opportunity to test > the change in high wind conditions, but she seemed to be much more > responsive to a turn to windward. > >> > >> I'll continue to experiment next year and spend more time working on a > way to be sure that the leading edge of the rudder is truly vertical. > >> > >> Chris > >> > >> -------------- next part -------------- > >> A non-text attachment was scrubbed... > >> Name: IMG_4528.PNG > >> Type: image/png > >> Size: 460057 bytes > >> Desc: not available > >> URL: < > http://rhodes22.org/pipermail/rhodes22-list/attachments/20221129/2624e7f9/attachment.png > > > >> > > > > > > > > ------------------------------ > > > > Message: 8 > > Date: Wed, 30 Nov 2022 00:04:49 -0500 > > From: Chris on LBI <cknell at vt.edu> > > To: The Rhodes 22 Email List <rhodes22-list at rhodes22.org> > > Subject: Re: [Rhodes22-list] Curved Rudder | 84 Rhodes 22 > > Message-ID: <f0d18634-48d9-7382-498d-3774198dc6de at vt.edu> > > Content-Type: text/plain; charset=UTF-8; format=flowed > > > > Roger, > > > > I don't have a sense for how much I moved the rudder blade on my two > > trials. I was just hoping that some change would be noticeable. I'll pay > > more attention next season, and, next time I have a chance, I'll try to > > measure the difference between the "full down haul" position and the > > vertical position. I'll also look at the mechanical stop to get a sense > > for how a shim might be implemented. But for now, I think just using the > > tension between the down-haul and the up-haul will be best for > > experimenting so that I can convince myself that helm behavior really > > does change. > > > > On the two days that I experimented, I was intentionally keeping the > > heel angle minimal, attempting to keep it flat. The winds were around 10 > > kts. I had the 130 genoa unfurled to the upper shrouds. So the luff of > > the headsail was not shaped well due to the sail furled on the headstay. > > > > On many days, we find ourselves sailing in 18 to 20 kts. We tend to be > > timid about heeling too much and generally either fall off to a more > > comfortable (flatter) reach or reduce sail. I've never really > > experienced the transition to weather helm due to heeling - even when we > > are heeled past our comfort angle. We probably head up before heeling > > sufficiently to cause the hull shape to induce weather helm. > > > > Chris > > > > > > > > On 11/29/2022 2:55 PM, ROGER PIHLAJA wrote: > >> Chris, > >> > >> After reading your post, I went out and looked my boat?s rudder. On my > R-22, the rudder blade pivots until it comes up against the underside of > the rudder head. On my boat, the leading edge of the rudder blade makes a > straight line with the leading edge of the rudder head when the rudder > blade is all the way down against this positive mechanical stop. However, > there are several manufacturing tolerances that can affect this geometry. > The exact size and shape of the rudder head and rudder blade relative to > the location of the rudder blade?s pivot are critical. If your rudder > blade pivots too far forward, probably the easiest way to fix it will be to > install a shim in between the bottom of the rudder head and the top of the > rudder blade. > >> > >> I know from experience; that, pivoting the rudder blade up tends to > increase weather helm. But, in my experience, the helm is not that > sensitive to this adjustment, especially when the rudder blade is nearly > fully down. How much did you have to move the rudder blade in order to get > rid of your lee helm? > >> > >> By the way, what was your angle of heel when you were doing your > tacking angle experiment? As you may know, the wetted surface area of the > R-22 hull becomes very asymmetric as the hull heels over. The asymmetry > tends to produce weather helm, becoming more pronounced as the angle of > heel increases. You may find your boat has lee helm when sailed flat, > transitioning to neutral helm, and then weather helm as you heel over. > Before you modify your rudder, be certain you are not introducing heavy > weather helm when the boat?s rail is in the water. > >> > >> Roger Pihlaja > >> S/V Dynamic Equilibrium > >> > >> Sent from my iPhone > >>> On Nov 29, 2022, at 1:13 PM, jpd9668 at gmail.com wrote: > >>> > >>> ?Chris, > >>> Yours is much different than my experience. Until Stan instructed me > how to use the downhaul on the rudder, I had severe lee helm. Once I pulled > the downhaul tight my helm has been balanced ever since. If you're getting > 95 deg. or less on point, that's pretty good. Do you have roller furling > jib? > >>> > >>> Joe Dempsey > >>> S/V Respite > >>> Deltaville, VA > >>> > >>> -----Original Message----- > >>> From: Rhodes22-list <rhodes22-list-bounces at rhodes22.org> On Behalf Of > Chris on LBI > >>> Sent: Tuesday, November 29, 2022 11:37 AM > >>> To: The Rhodes 22 Email List <rhodes22-list at rhodes22.org> > >>> Subject: Re: [Rhodes22-list] Curved Rudder | 84 Rhodes 22 > >>> > >>> It is so interesting that to me that this topic just came up. I've > been thinking about posting some late-season observations about my Rhodes > that are closely related to this thread. > >>> > >>> After years of being frustrated with what I consider to be excessive > lee helm, toward the end of this past season I noticed that the forward > edge of my rudder was not vertical. It is much like the white rudder shown > in Bob's photo. It kicks forward a little. In an attempt to rectify this, I > changed how I was using the rudder down-haul. Rather than pull it tight, I > eased off a bit allowing me to use the up-haul to make the leading edge of > the rudder close to vertical. > >>> > >>> I only had the opportunity to try this twice before we had to take the > boat out for the season, but in both outings, I was able to much more > easily balance the helm and was able to tack very close to 90 degrees > (something that eluded me on this boat since we purchased her). Attached is > a diagram showing my track as I tested my ability to tack while sailing as > close to the wind as I could. As you can see, the tacks were about 95 > degrees. In the past I was generally closer to 110 degrees, so I consider > this a great improvement. > >>> > >>> Also, prior to trying this adjustment with the rudder, we frequently > had difficulty bringing the bow through the wind; we had to be very precise > with our timing of releasing sheets. I did not have the opportunity to test > the change in high wind conditions, but she seemed to be much more > responsive to a turn to windward. > >>> > >>> I'll continue to experiment next year and spend more time working on a > way to be sure that the leading edge of the rudder is truly vertical. > >>> > >>> Chris > >>> > >>> -------------- next part -------------- > >>> A non-text attachment was scrubbed... > >>> Name: IMG_4528.PNG > >>> Type: image/png > >>> Size: 460057 bytes > >>> Desc: not available > >>> URL: < > https://na01.safelinks.protection.outlook.com/?url=http%3A%2F%2Frhodes22.org%2Fpipermail%2Frhodes22-list%2Fattachments%2F20221129%2F2624e7f9%2Fattachment.png&data=05%7C01%7C%7C14e50c603e664400598208dad235763f%7C84df9e7fe9f640afb435aaaaaaaaaaaa%7C1%7C0%7C638053424313125675%7CUnknown%7CTWFpbGZsb3d8eyJWIjoiMC4wLjAwMDAiLCJQIjoiV2luMzIiLCJBTiI6Ik1haWwiLCJXVCI6Mn0%3D%7C3000%7C%7C%7C&sdata=sddmh3HKnm78KH1y%2BWXGh63%2Fqy8FvY4X1TDKohWJ1Ng%3D&reserved=0 > > > >>> > > > > > > > > ------------------------------ > > > > Message: 9 > > Date: Wed, 30 Nov 2022 08:13:30 -0500 > > From: jpd9668 <jpd9668 at gmail.com> > > To: The Rhodes 22 Email List <rhodes22-list at rhodes22.org> > > Subject: Re: [Rhodes22-list] Curved Rudder | 84 Rhodes 22 > > Message-ID: <63875705.020a0220.7c723.105e at mx.google.com> > > Content-Type: text/plain; charset="utf-8" > > > > Chris,I was very un-clear. The 95 degrees i was referring to was from > 45+ degrees on either side of the wind. Was that your point of reference as > well? I can get 45 degrees on Port tack? but have trouble getting that > close on on starboard tack.Joe DempseySent via the Samsung Galaxy S22 5G, > an AT&T 5G smartphone > > -------- Original message --------From: Chris on LBI <cknell at vt.edu> > Date: 11/29/22 11:26 PM (GMT-05:00) To: The Rhodes 22 Email List < > rhodes22-list at rhodes22.org> Subject: Re: [Rhodes22-list] Curved Rudder | > 84 Rhodes 22 Joe,I do have a roller furling jib. On this particular day, > when I was experimenting, I had my 130 genoa unfurled to the upper > shrouds.ChrisOn 11/29/2022 1:13 PM, jpd9668 at gmail.com wrote:> Chris,> > Yours is much different than my experience. Until Stan instructed me how to > use the downhaul on the rudder, I had severe lee helm. Once I pulled the > downhaul tight my helm has been balanced ever since. If you're getting 95 > deg. or less on point, that's pretty good. Do you have roller furling > jib?>> Joe Dempsey> S/V Respite> Deltaville, VA>> -----Original > Message-----> From: Rhodes22-list <rhodes22-list-bounces at rhodes22.org> On > Behalf Of Chris on LBI> Sent: Tuesday, November 29, 2022 11:37 AM> To: The > Rhodes 22 Email List <rhodes22-list at rhodes22.org>> Subject: Re: > > [Rhodes22-list] Curved Rudder | 84 Rhodes 22>> It is so interesting that > to me that this topic just came up. I've been thinking about posting some > late-season observations about my Rhodes that are closely related to this > thread.>> After years of being frustrated with what I consider to be > excessive lee helm, toward the end of this past season I noticed that the > forward edge of my rudder was not vertical. It is much like the white > rudder shown in Bob's photo. It kicks forward a little. In an attempt to > rectify this, I changed how I was using the rudder down-haul. Rather than > pull it tight, I eased off a bit allowing me to use the up-haul to make the > leading edge of the rudder close to vertical.>> I only had the opportunity > to try this twice before we had to take the boat out for the season, but in > both outings, I was able to much more easily balance the helm and was able > to tack very close to 90 degrees (something that eluded me on this boat > since we purchased her). Attached > > is a diagram showing my track as I tested my ability to tack while > sailing as close to the wind as I could. As you can see, the tacks were > about 95 degrees. In the past I was generally closer to 110 degrees, so I > consider this a great improvement.>> Also, prior to trying this adjustment > with the rudder, we frequently had difficulty bringing the bow through the > wind; we had to be very precise with our timing of releasing sheets. I did > not have the opportunity to test the change in high wind conditions, but > she seemed to be much more responsive to a turn to windward.>> I'll > continue to experiment next year and spend more time working on a way to be > sure that the leading edge of the rudder is truly vertical.>> Chris>> > -------------- next part --------------> A non-text attachment was > scrubbed...> Name: IMG_4528.PNG> Type: image/png> Size: 460057 bytes> Desc: > not available> URL: < > http://rhodes22.org/pipermail/rhodes22-list/attachments/20221129/2624e7f9/attachment.png > >> > > > > ------------------------------ > > > > Message: 10 > > Date: Wed, 30 Nov 2022 09:51:19 -0500 > > From: Chris on LBI <cknell at vt.edu> > > To: The Rhodes 22 Email List <rhodes22-list at rhodes22.org> > > Subject: Re: [Rhodes22-list] Curved Rudder | 84 Rhodes 22 > > Message-ID: <6d06f513-d256-ca5d-0877-3e0065372fc7 at vt.edu> > > Content-Type: text/plain; charset=UTF-8; format=flowed > > > > Joe, > > > > I'm not sure which tack I do better on. I'll have to try to check next > > season. I'm afraid that it might be difficult for me to know for sure > > since I am always dealing with significant tidal currents that make > > precise measurements like that nearly impossible. > > > > Chris > > > > > > ------------------------------ > > > > Message: 11 > > Date: Wed, 30 Nov 2022 17:11:30 -0500 > > From: Lee Kuhn <lvjkuhn at gmail.com> > > To: The Rhodes 22 Email List <rhodes22-list at rhodes22.org> > > Subject: [Rhodes22-list] Removing Gas from Fuel Line > > Message-ID: > > < > CAPgvAEmLX7eK5u+y+CKO1chXfn-2HMT1WPSNuo40riptahb_fQ at mail.gmail.com> > > Content-Type: text/plain; charset="utf-8" > > > > What's the easiest way to remove gas from the fuel hose? The hose has a > > ball spring valve at both ends. I was told not to push the valve open > with > > some type of tool because I could damage the valve. > > > > I disconnected the tank and put it in the lazarette and then reran the > hose > > into the lazarette and reconnected the hose to the tank which opened the > > valve on that end. I then disconnected the hose from the outboard and > > held it up as high as I could (gravity) and squeezed the primer. The > > primer pumps gas in the opposite direction than I wanted but if you > squeeze > > it hard and slow the gas will eventually drain into the tank. > > > > Seems like there must be a better way. The gas was ethanol-free with a > > stabilizer. Should I just leave it in the hose and hope I won't have any > > problems starting the outboard in the Spring? > > > > Lee > > 1999 Rhodes22 AT EASE > > Claytor Lake, VA > > > > ------------------------------ > > > > Message: 12 > > Date: Wed, 30 Nov 2022 14:30:19 -0800 > > From: Peter Nyberg <peter at sunnybeeches.com> > > To: rhodes22-list at rhodes22.org > > Subject: Re: [Rhodes22-list] Removing Gas from Fuel Line > > Message-ID: <E1p0Vat-0063j5-BP at s152.servername.online> > > Content-Type: text/plain; charset="UTF-8" > > > > Lee, > > > > It never occurred to me to worry about this. I do empty my boat fuel > tanks into a vehicle in the fall, and I do use a stabilizer for all my boat > fuel. But, I don't have a convenient source for ethanol-free fuel, so I > use the universal 90/10 mix. > > > > Long story short, I've never had a problem getting my outboard running > in the spring. > > > > Peter Nyberg > > Coventry, CT > > s/v Silverheels (1988/2016) > > > >> On 2022-11-30, at 17:11:30 EST, Lee Kuhn wrote: > >> > >> What's the easiest way to remove gas from the fuel hose? The hose has > a ball > >> spring valve at both ends. I was told not to push the valve open with > some type > >> of tool because I could damage the valve. > >> > >> I disconnected the tank and put it in the lazarette and then reran the > hose into > >> the lazarette and reconnected the hose to the tank which opened the > valve on > >> that end. I then disconnected the hose from the outboard and held it > up as high > >> as I could (gravity) and squeezed the primer. The primer pumps gas in > the > >> opposite direction than I wanted but if you squeeze it hard and slow > the gas > >> will eventually drain into the tank. > >> > >> Seems like there must be a better way. The gas was ethanol-free with a > >> stabilizer. Should I just leave it in the hose and hope I won't have > any > >> problems starting the outboard in the Spring? > >> > >> Lee > >> 1999 Rhodes22 AT EASE > >> Claytor Lake, VA > >> > > > > > > > > ------------------------------ > > > > Message: 13 > > Date: Wed, 30 Nov 2022 22:34:37 +0000 > > From: ROGER PIHLAJA <roger_pihlaja at msn.com> > > To: The Rhodes 22 Email List <rhodes22-list at rhodes22.org> > > Subject: Re: [Rhodes22-list] Removing Gas from Fuel Line > > Message-ID: > > < > CY8PR10MB668383056F98D5A9E6BA561880159 at CY8PR10MB6683.namprd10.prod.outlook.com > > > > > > Content-Type: text/plain; charset="utf-8" > > > > Lee, > > > > As long as you push on the ball check valve with something soft, like a > piece of plastic, you are unlikely to damage it. I always drain the gas > line at the end of the season. > > > > Roger Pihlaja > > S/V Dynamic Equilibrium > > > > Sent from my iPhone > > > >> On Nov 30, 2022, at 5:11 PM, Lee Kuhn <lvjkuhn at gmail.com> wrote: > >> > >> ?What's the easiest way to remove gas from the fuel hose? The hose has > a > >> ball spring valve at both ends. I was told not to push the valve open > with > >> some type of tool because I could damage the valve. > >> > >> I disconnected the tank and put it in the lazarette and then reran the > hose > >> into the lazarette and reconnected the hose to the tank which opened the > >> valve on that end. I then disconnected the hose from the outboard and > >> held it up as high as I could (gravity) and squeezed the primer. The > >> primer pumps gas in the opposite direction than I wanted but if you > squeeze > >> it hard and slow the gas will eventually drain into the tank. > >> > >> Seems like there must be a better way. The gas was ethanol-free with a > >> stabilizer. Should I just leave it in the hose and hope I won't have > any > >> problems starting the outboard in the Spring? > >> > >> Lee > >> 1999 Rhodes22 AT EASE > >> Claytor Lake, VA > > > > ------------------------------ > > > > Message: 14 > > Date: Wed, 30 Nov 2022 21:56:55 -0500 (EST) > > From: cjlowe at sssnet.com > > To: "The Rhodes 22 Email List" <rhodes22-list at rhodes22.org> > > Subject: Re: [Rhodes22-list] Removing Gas from Fuel Line > > Message-ID: > > <55562.24.140.30.102.1669863415.squirrel at quickpop.sssnet.com> > > Content-Type: text/plain;charset=iso-8859-1 > > > >> Lee, > > > > I bought a replacement for my motor connection, and keep on board in > > spare parts. End of season, I put the gas tank in the bed of the truck , > > put the spare connector on the end of the hose and stick it in a five > > gallon gas can, pump the bulb a couple times and drink a beer. > > > > > > Jerry Lowe SV Country Rhodes '86 > > > > > > > > > > > > > > > > > > > > > > > > Lee, > >> > >> As long as you push on the ball check valve with something soft, like a > >> piece of plastic, you are unlikely to damage it. I always drain the gas > >> line at the end of the season. > >> > >> Roger Pihlaja > >> S/V Dynamic Equilibrium > >> > >> Sent from my iPhone > >> > >>> On Nov 30, 2022, at 5:11 PM, Lee Kuhn <lvjkuhn at gmail.com> wrote: > >>> > >>> ???What's the easiest way to remove gas from the fuel hose? The hose > >>> has a > >>> ball spring valve at both ends. I was told not to push the valve open > >>> with > >>> some type of tool because I could damage the valve. > >>> > >>> I disconnected the tank and put it in the lazarette and then reran the > >>> hose > >>> into the lazarette and reconnected the hose to the tank which opened > >>> the > >>> valve on that end. I then disconnected the hose from the outboard and > >>> held it up as high as I could (gravity) and squeezed the primer. The > >>> primer pumps gas in the opposite direction than I wanted but if you > >>> squeeze > >>> it hard and slow the gas will eventually drain into the tank. > >>> > >>> Seems like there must be a better way. The gas was ethanol-free with a > >>> stabilizer. Should I just leave it in the hose and hope I won't have > >>> any > >>> problems starting the outboard in the Spring? > >>> > >>> Lee > >>> 1999 Rhodes22 AT EASE > >>> Claytor Lake, VA > >> > > > > > > > > > > ------------------------------ > > > > Message: 15 > > Date: Thu, 1 Dec 2022 11:20:16 -0500 > > From: Lee Kuhn <lvjkuhn at gmail.com> > > To: The Rhodes 22 Email List <rhodes22-list at rhodes22.org> > > Subject: Re: [Rhodes22-list] Removing Gas from Fuel Line > > Message-ID: > > <CAPgvAEmEw1T0F=j6vm7_B41= > v2qw5quKvjERcOc08r2D+zUFrA at mail.gmail.com> > > Content-Type: text/plain; charset="utf-8" > > > > I like Roger's idea to release the ball-spring with something that won't > > cause damage. If I place the tank on the cockpit seat I and pull the > hose > > down tight I should be able to get most of the gas out, and on me. > > > > I like Peter's idea to do nothing. I'm really good at that. I'll > probably > > use this method along with Jerry's idea to drink a beer. > > > > Thanks guys! > > > > Lee > > > > On Wed, Nov 30, 2022 at 10:02 PM <cjlowe at sssnet.com> wrote: > > > >>> Lee, > >> > >> I bought a replacement for my motor connection, and keep on board in > >> spare parts. End of season, I put the gas tank in the bed of the truck , > >> put the spare connector on the end of the hose and stick it in a five > >> gallon gas can, pump the bulb a couple times and drink a beer. > >> > >> > >> Jerry Lowe SV Country Rhodes '86 > >> > >> > >> > >> > >> > >> > >> > >> > >> > >> > >> > >> Lee, > >>> > >>> As long as you push on the ball check valve with something soft, like a > >>> piece of plastic, you are unlikely to damage it. I always drain the > gas > >>> line at the end of the season. > >>> > >>> Roger Pihlaja > >>> S/V Dynamic Equilibrium > >>> > >>> Sent from my iPhone > >>> > >>>> On Nov 30, 2022, at 5:11 PM, Lee Kuhn <lvjkuhn at gmail.com> wrote: > >>>> > >>>> ?What's the easiest way to remove gas from the fuel hose? The hose > >>>> has a > >>>> ball spring valve at both ends. I was told not to push the valve open > >>>> with > >>>> some type of tool because I could damage the valve. > >>>> > >>>> I disconnected the tank and put it in the lazarette and then reran the > >>>> hose > >>>> into the lazarette and reconnected the hose to the tank which opened > >>>> the > >>>> valve on that end. I then disconnected the hose from the outboard and > >>>> held it up as high as I could (gravity) and squeezed the primer. The > >>>> primer pumps gas in the opposite direction than I wanted but if you > >>>> squeeze > >>>> it hard and slow the gas will eventually drain into the tank. > >>>> > >>>> Seems like there must be a better way. The gas was ethanol-free with > a > >>>> stabilizer. Should I just leave it in the hose and hope I won't have > >>>> any > >>>> problems starting the outboard in the Spring? > >>>> > >>>> Lee > >>>> 1999 Rhodes22 AT EASE > >>>> Claytor Lake, VA > >>> > >> > >> > >> > > > > ------------------------------ > > > > Message: 16 > > Date: Sun, 4 Dec 2022 09:34:31 -0500 > > From: Chris on LBI <cknell at vt.edu> > > To: The Rhodes 22 Email List <rhodes22-list at rhodes22.org> > > Subject: Re: [Rhodes22-list] Curved Rudder | 84 Rhodes 22 > > Message-ID: <9d4c38a9-5e00-a0a0-7528-73c2e3aa8422 at vt.edu> > > Content-Type: text/plain; charset="utf-8"; Format="flowed" > > > > I was able to take a look at the rudder yesterday. In hindsight, I can't > > believe that it took me 5 full seasons of sailing to recognize that this > > was a potential problem. Attached are three photos. The first gives a > > sense of how far the rudder swings under the hull when the down-haul is > > used to pull the rudder against the "stop".? In the second photo I have > > placed a white piece of plastic vertically to make more obvious how much > > past vertical the rudder is when it is against the stop. The forward > > edge of the white plastic is parallel with the forward edge of the > > rudder head. The third photo shows the "stop" which is the forward side > > of the rudder head (as Roger stated). > > > > As Roger predicted in his previous email, it appears that the mechanical > > variations of this particular rudder and rudder head allow the rudder to > > rotate too far forward. As he suggested, I will experiment with a shim > > to correct this. If this does not work out easily, I will place a mark > > on the up-haul so that I know how far to deploy it to keep the rudder > > from over-rotating, and then tension the down-haul against it. > > > > Chris > > -------------- next part -------------- > > A non-text attachment was scrubbed... > > Name: IMG_4808.jpg > > Type: image/jpeg > > Size: 77096 bytes > > Desc: not available > > URL: < > http://rhodes22.org/pipermail/rhodes22-list/attachments/20221204/7aab683b/attachment.jpg > > > > -------------- next part -------------- > > A non-text attachment was scrubbed... > > Name: IMG_4810.jpg > > Type: image/jpeg > > Size: 65366 bytes > > Desc: not available > > URL: < > http://rhodes22.org/pipermail/rhodes22-list/attachments/20221204/7aab683b/attachment-0001.jpg > > > > -------------- next part -------------- > > A non-text attachment was scrubbed... > > Name: IMG_4811.jpg > > Type: image/jpeg > > Size: 81121 bytes > > Desc: not available > > URL: < > http://rhodes22.org/pipermail/rhodes22-list/attachments/20221204/7aab683b/attachment-0002.jpg > > > > > > ------------------------------ > > > > Message: 17 > > Date: Sun, 4 Dec 2022 10:14:48 -0500 > > From: Mary Lou Troy <mtroy at atlanticbb.net> > > To: The Rhodes 22 Email List <rhodes22-list at rhodes22.org> > > Subject: Re: [Rhodes22-list] Curved Rudder | 84 Rhodes 22 > > Message-ID: <01193a8d-1d85-3485-05a1-959ac2b949a7 at atlanticbb.net> > > Content-Type: text/plain; charset=UTF-8; format=flowed > > > > I have not been following this discussion closely and I am relying on > > memory here so take these statements with a grain of salt. > > > > When we purchased Fretless (recycled) in 1998 we had a number of > > discussions with Stan about rigging, helm and the rudder. He was quite > > clear that the proper position for the rudder underway was pulled > > forward of vertical so it was somewhat under the hull. Fred and I both > > remember the boat as being somewhat sluggish and less responsive if the > > rudder was not pulled far enough forward. Helm was also affected by the > > position of the rudder. > > > > I'll keep an eye out the results of your testing as I suppose it is > > indeed possible to have it too far forward if the fittings have changed > > but Stan set up our boat and we always pulled it as far forward as it > > would go. > > > > When doing your tests, make sure all the other variables are the same - > > for example the boat is very affected, usually positively, by weight in > > the bow. As our water tank was nearly centerline, we usually had it > > filled more than half way. > > > > All our best, > > Mary Lou (and Fred) > > ex Rhodes 22 > > now Rosborough RF-246? Tara > > Rock Hall, MD > > > > On 12/4/2022 9:34 AM, Chris on LBI wrote: > >> I was able to take a look at the rudder yesterday. In hindsight, I > >> can't believe that it took me 5 full seasons of sailing to recognize > >> that this was a potential problem. Attached are three photos. The > >> first gives a sense of how far the rudder swings under the hull when > >> the down-haul is used to pull the rudder against the "stop". In the > >> second photo I have placed a white piece of plastic vertically to make > >> more obvious how much past vertical the rudder is when it is against > >> the stop. The forward edge of the white plastic is parallel with the > >> forward edge of the rudder head. The third photo shows the "stop" > >> which is the forward side of the rudder head (as Roger stated). > >> > >> As Roger predicted in his previous email, it appears that the > >> mechanical variations of this particular rudder and rudder head allow > >> the rudder to rotate too far forward. As he suggested, I will > >> experiment with a shim to correct this. If this does not work out > >> easily, I will place a mark on the up-haul so that I know how far to > >> deploy it to keep the rudder from over-rotating, and then tension the > >> down-haul against it. > >> > >> Chris > >> -------------- next part -------------- > >> A non-text attachment was scrubbed... > >> Name: IMG_4808.jpg > >> Type: image/jpeg > >> Size: 77096 bytes > >> Desc: not available > >> URL: > >> < > http://rhodes22.org/pipermail/rhodes22-list/attachments/20221204/7aab683b/attachment.jpg > > > >> -------------- next part -------------- > >> A non-text attachment was scrubbed... > >> Name: IMG_4810.jpg > >> Type: image/jpeg > >> Size: 65366 bytes > >> Desc: not available > >> URL: > >> < > http://rhodes22.org/pipermail/rhodes22-list/attachments/20221204/7aab683b/attachment-0001.jpg > > > >> -------------- next part -------------- > >> A non-text attachment was scrubbed... > >> Name: IMG_4811.jpg > >> Type: image/jpeg > >> Size: 81121 bytes > >> Desc: not available > >> URL: > >> < > http://rhodes22.org/pipermail/rhodes22-list/attachments/20221204/7aab683b/attachment-0002.jpg > > > > > > > > > > ------------------------------ > > > > Message: 18 > > Date: Sun, 4 Dec 2022 10:38:22 -0500 > > From: Todd Tavares <tavares0947 at gmail.com> > > To: The Rhodes 22 Email List <rhodes22-list at rhodes22.org> > > Subject: Re: [Rhodes22-list] Curved Rudder | 84 Rhodes 22 > > Message-ID: > > <CAB-twMN_dJb0-eHOQC9j3P_2TPx5a=EjrHrOfCMLguGGZLiq= > A at mail.gmail.com> > > Content-Type: text/plain; charset="utf-8" > > > > Chris, > > Rather than trying to mess around with making and securing a shim, would > it > > be easier to re-fabricate that entire forward vertical blocking between > the > > rudderhead faces? > > > > Todd T > > > > On Sun, Dec 4, 2022, 9:34 AM Chris on LBI <cknell at vt.edu> wrote: > > > >> I was able to take a look at the rudder yesterday. In hindsight, I can't > >> believe that it took me 5 full seasons of sailing to recognize that this > >> was a potential problem. Attached are three photos. The first gives a > >> sense of how far the rudder swings under the hull when the down-haul is > >> used to pull the rudder against the "stop". In the second photo I have > >> placed a white piece of plastic vertically to make more obvious how much > >> past vertical the rudder is when it is against the stop. The forward > >> edge of the white plastic is parallel with the forward edge of the > >> rudder head. The third photo shows the "stop" which is the forward side > >> of the rudder head (as Roger stated). > >> > >> As Roger predicted in his previous email, it appears that the mechanical > >> variations of this particular rudder and rudder head allow the rudder to > >> rotate too far forward. As he suggested, I will experiment with a shim > >> to correct this. If this does not work out easily, I will place a mark > >> on the up-haul so that I know how far to deploy it to keep the rudder > >> from over-rotating, and then tension the down-haul against it. > >> > >> Chris > >> -------------- next part -------------- > >> A non-text attachment was scrubbed... > >> Name: IMG_4808.jpg > >> Type: image/jpeg > >> Size: 77096 bytes > >> Desc: not available > >> URL: < > >> > http://rhodes22.org/pipermail/rhodes22-list/attachments/20221204/7aab683b/attachment.jpg > >>> > >> -------------- next part -------------- > >> A non-text attachment was scrubbed... > >> Name: IMG_4810.jpg > >> Type: image/jpeg > >> Size: 65366 bytes > >> Desc: not available > >> URL: < > >> > http://rhodes22.org/pipermail/rhodes22-list/attachments/20221204/7aab683b/attachment-0001.jpg > >>> > >> -------------- next part -------------- > >> A non-text attachment was scrubbed... > >> Name: IMG_4811.jpg > >> Type: image/jpeg > >> Size: 81121 bytes > >> Desc: not available > >> URL: < > >> > http://rhodes22.org/pipermail/rhodes22-list/attachments/20221204/7aab683b/attachment-0002.jpg > >>> > >> > > > > ------------------------------ > > > > Subject: Digest Footer > > > > _______________________________________________ > > Rhodes22-list mailing list > > Rhodes22-list at rhodes22.org > > http://rhodes22.org/mailman/listinfo/rhodes22-list > > > > > > ------------------------------ > > > > End of Rhodes22-list Digest, Vol 4477, Issue 1 > > ********************************************** > >
To use your email application to send a messsage to the webmaster rather than this form, .
Your post is being sent... 