The Rhodes 22 Discussion Group R22 Discussion Group

The Rhodes 22 Discussion Group


< prior

Back to Month

Go to Thread

Member Picture

Mitch Mitchell



IMF Mast & Sail

2023-01-02; 15:13:21 EST

Member Since

2019-09-28

Posts: 84

Hi Ric, I too have an IMF mast and boom that I got from a boat that was being destroyed and I would love to replace my 1990 continental with the IMF but haven't had time to do it or been able to find anyone that could do it. I believe the old shrouds are still with the mast so I could try and measure them. (not sure if the boats are exactly the same) I did measure the masts and they seem identical in overall length. I also have the roller furling tube for the forestay but I haven't been able to find the bushings that the forestay goes through. The furling tube on the older boat has a slot in it and the jib slides up through the slot like a bolt rope. My 1990 furling tube is round and the jib slides over it like a sock. Any information you find I would love to hear about it! Thanks, Mitch I attached some images of the bushing at the top of roller furling tube.


IMG_3917 2.HEIC

IMG_3768 2.HEIC
See the original archive post
×

Message to Webmaster:

To use your email application to send a messsage to the webmaster rather than this form, .



×

Post to the Rhodes 22 Email List:



×

Sending Post:

Your post is being sent... waiting