The Rhodes 22 Discussion Group R22 Discussion Group

The Rhodes 22 Discussion Group


< prior

Back to Month

Go to Thread

Member Picture

Peter Nyberg



Spreaders

2023-04-06; 13:31:46 EDT

Member Since

2016-04-14

Posts: 711

Hank,

I'm going to assume that you have an original General Boats mast, and that your mainsail furls up inside your mast (i.e. you have Inner Mast Furling, or IMF).

Your spreaders should attach to brackets which are then attached to the mast.  The spreaders are held in place by cotter pins (one each).  The brackets are attached to the mast by a bolt that passes through the mast.  Inside the mast, there should also be a compression sleeve, which prevents the bolt from compressing and deforming the mast.

The bracket also provides attachment points for the lower shrouds.

The spreaders can be pretty floppy when the mast is down.  With the mast raised, the upper shrouds keep things in place.

I've attached a picture of a spreader bracket from the Dwyer website.

Peter Nyberg
Coventry, CT
s/v Silverheels (1988/2016)


Spreader Bracket.jpg
See the original archive post
×

Message to Webmaster:

To use your email application to send a messsage to the webmaster rather than this form, .



×

Post to the Rhodes 22 Email List:



×

Sending Post:

Your post is being sent... waiting