The Rhodes 22 Discussion Group R22 Discussion Group

The Rhodes 22 Discussion Group


< prior

Back to Month

Go to Thread

Member Picture

Joe Dempsey



R22 Mainsheet rigging

2023-08-18; 19:14:53 EDT

Member Since

2022-05-14

Posts: 216

Tom,
As for GBI, I don't know their or Stan's status. He is 94-97 years of age and had been  off the grid for sometime now. For standing rigging, contact Dwyer Aluminum Mast, sorry I don't have contact info, but they have a website with a phone number. I'd advise contacting them for mast, spar and standing rigging questions. They have the drawings for all of the standing rigging, spars, etc. For running rigging, it's all pretty much by measurement. The traveler is available through an associate of Stan's (someone on the List will chime in with his name and contact info. I think the key question will be, "do you have an IMF or standard mast"? and "Do you have a roller furling jib"? If so, which one. I think there were two, maybe three. Stan's original GBI system and then the CDI F2. I believe the CDI system mates with the IMF mast, and they should have the correct measurements for the forestay. Contact Joel at info at sailcdi.com or 844-379-2407.  Good luck!

Joe Dempsey

Trojan 42
M/V Voyager
Former Rhodes 22
S/V Respite
Deltaville, VA

See the original archive post
×

Message to Webmaster:

To use your email application to send a messsage to the webmaster rather than this form, .



×

Post to the Rhodes 22 Email List:



×

Sending Post:

Your post is being sent... waiting