I have a standard most as well - at lease so far - Ii’m building a new IMF mast for next season.
Anyway- my existing pop top connector is made of stainless steel,2 pieces bent 90º
I”ll try to remember to take a picture of it.
I made a mast slider piece out of Delrin and a mast slot guide from Defender. I did, over the summer, successfully get Charles Gabriel at GB to sell me new parts for the IMF guts, including a new Pop-top connector to fit the IMF mast slot.
I will need all new shrouds - if anyone has spare shrouds to sell - let me know please.
A new set from Dwyer is about $900+
R
Richard F. Stott, AIA, LEED AP
ric at stottarchitecture.com
O -631-283-1777
C- 516-965-3164
> On Sep 5, 2023, at 11:45 AM, DAVID BERG via Rhodes22-list <rhodes22-list at rhodes22.org> wrote:
>> Rhodies,
>>>> Does anyone have a good idea for fabricating a new bracket that holds the
> pop top (pop top side)? I recently broke mine as I forgot to release it
> before lowering the mast. I thought I could just use DAP epoxy and clamp it
> overnight, but that did not hold at all. The material appears to be HDPE and
> is very brittle.
>>>> I can probably purchase a chuck of HDPE and cut/drill a new bracket, but am
> wondering if anyone has a better idea for material or method? Photo
> attached. Note that the photo also shows the chamfered holes for the mast
> step tabernacle that I recently repaired. I used the method recommended by
> West Systems reported in a previous thread. This ended up working great, as
> far as I can tell.
>>>> Thanks,
>> David Berg
>> Blue Loon, Rhodes 22 1996/2003
>> Minneapolis, MN
>>>> -------------- next part --------------
> A non-text attachment was scrubbed...
> Name: Pop top bracket.jpg
> Type: image/jpeg
> Size: 140658 bytes
> Desc: not available
> URL: <http://rhodes22.org/pipermail/rhodes22-list/attachments/20230905/f4c18f12/attachment.jpg>
×
Message to Webmaster:
To use your email application to send a messsage to the webmaster rather than this form,
.