The Rhodes 22 Discussion Group R22 Discussion Group

The Rhodes 22 Discussion Group


< prior

Back to Month

Go to Thread

Member Picture

Todd Tavares



Rigging the main sheet

2023-10-10; 09:37:44 EDT

Member Since

2002-09-10

Posts: 976

Tom,

The main sheet set up is the same as most main sheet or boom vang configurations.

The connection to the end of the boom hasn't changed much over the years, and is a tang hanging loosely from the end casting of the boom. Without looking, I can't remember if its a 4 to1 or a 5 to 1 set-up.

The  traveler set-up has changed several times over the years though. The earliest ones I've seen on the boats I've owned (a 1974, 1976 and my present 1984) have/had a single wire going between the backstay chainplates with enough slack to form in inverted V over the tiller. Riding on that cable was a traveling block with a shackle to attach the lower block and cam assembly of the main sheet tackle. Some, like my 1984 were rigged with a second set of blocks captured on the backstays; below the backstay tensioning blocks, as a rudimentary way to tow the mainsheet to windward. The previous owner of my boat (Lloyd Crowther) just eliminated the inverted V cable and simply used the line as a traveler (see pic)
They next version of traveler had a 1" SS tube set between stanchion caps captured on the backstays where the older version blocks were. This type of tube traveler was used for many years.
The final version of the traveller is the one Robert has pictured. There was a year of so just before that Stan had a couple of failed attempts before settling on Robert's model.

I will try to post pics this evening of the otherversions/styles of travelers.

But what if anything, do you have now?

Todd T


lloyd_large.jpg
See the original archive post
×

Message to Webmaster:

To use your email application to send a messsage to the webmaster rather than this form, .



×

Post to the Rhodes 22 Email List:



×

Sending Post:

Your post is being sent... waiting