The Rhodes 22 Discussion Group R22 Discussion Group

The Rhodes 22 Discussion Group


< prior

Back to Month

Go to Thread

Member Picture

Todd Tavares



Inner Shroud Issues

2023-11-09; 13:01:21 EST

Member Since

2002-09-10

Posts: 976

Matt,
I don't know what part of the country you live in, but it's getting pretty late in the year to do fiberglass and epoxy work here in Maryland.

I took a different tack fixing my chainplates.
The plywood core had been wet at some point but then dry for many years. The core and thickened epoxy had separated and the plywood dry rotted and became friable. The obvious sign of a problem for me was loose floppy chainplates.
I cut access holes in the side cabin walls. Then cut the old chainplates off with a 2" cut-off disk, making sure to cut before the bend. I made reinforcement plates from ⅜" (?) thick oak, sealed with 2 coats of epoxy, then epoxied them to the inner side of the outer cabin walls with thickened epoxy.

I dry fit everything in place first, so that the chainplate bolts (¼-20 machine screws) would do the clamping.

My boat is older, doesn't have the hatches, and I was concerned more with making it stronger than worried how it looks.

In hindsight, I probably should have just the whole top off and replaced all of the core wood, but just don't have the time, or patience.



Todd T.

Something like the attached sketches. They may not come out in order or oriented right.



20231109_122120.heic

20231109_122450.heic

20231109_123015.heic
See the original archive post
×

Message to Webmaster:

To use your email application to send a messsage to the webmaster rather than this form, .



×

Post to the Rhodes 22 Email List:



×

Sending Post:

Your post is being sent... waiting