My old plywood hatch cover was in rough shape. It had been painted white but not soon enough or often enough. I recently replaced using PVC plywood from home depot and the original piano hinge. Use the old and a pattern, just a skill saw and a router bit for the edges. Seems OK. Light weight. I painted it white over white but probably OK without paint. It has wood grain texture on one side. I assume it will be fine and not warp or anything in the hot sun but time will tell.
On Sun, Mar 17, 2024 at 12:19 PM ROGER PIHLAJA <roger_pihlaja at msn.com>
wrote:
> Hi Cary,
>> My 1978 Rhodes 22 has a luan teak plywood companionway hatch cover. The
> hinge is a SS piano hinge. I have to take the hatch cover apart, sand it
> down, and revarnish every couple of years. But, given that minimal
> maintenance, it's still the original hatch cover. Of course, it doesn't
> allow any light into the cabin when closed; but, it also doesn't get hot in
> direct sunshine. Freshly varnished, I think it looks good, very
> traditional. Even when UV stabilized, polycarbonate will take UV damage
> from the sun. Polycarbonate is a crystaline polymer, which means it
> inherantly tends to fail by brittle fracture, even when new. UV exposure
> only renders it more brittle. Is your hinge thru bolted or are the screws
> threaded into the Lexan? If it is threaded; then, you could make it
> somewhat more resistant to cracking by drilling out the threads. Then,
> thru bolt it using the biggest OD fender washers that will fit. Thru
> bolting with fender washers to spread the load will make the hinge assembly
> much less likely to crack.
>> Roger Pihlaja
> S/V Dynamic Equilibrium
> 1978 Sanford, MI
>> ________________________________
> From: Rhodes22-list <rhodes22-list-bounces at rhodes22.org> on behalf of
> Cary Tolbert <retiredtoby at gmail.com>
> Sent: Saturday, March 16, 2024 6:31 PM
> To: The Rhodes 22 Email List <rhodes22-list at rhodes22.org>
> Subject: [Rhodes22-list] Hatch to Cabin
>> My hatch is made of 3/8 in. thick black polycarbonate (lexan). It has a
> crack at the bend. Like me it has been patched up and is still serviceable.
> I am thinking more about when the time comes to sell the boat. What
> material is General Boats currently using? The previous owner said the boat
> went through recycling in the early 2000s. So the polycarbonate has held up
> to abuse and the sun for 20 years.
> It does let some light into the cabin but the black color absorbs a lot of
> heat.
> Looking for suggestions and ideas of what may be the current or fashionable
> update for the market. I know tastes change but I still wear penny loafers
> style shoes from the 60s.
>> Thanks for your help.
>> Cary Tolbert
> S/V Whisper 86
> Claytor Lake , VA
>
×
Message to Webmaster:
To use your email application to send a messsage to the webmaster rather than this form,
.