2024-05-25; 08:49:46 EDT
Member Since
2024-05-25
Posts: 7
Hello all, New owners of a 2007 Rhodes 22 (formerly "Last Mango" - about to be renamed) in Vermont. Thanks to the wonders of the archives and search function, I haven't posted yet because all of my questions had already been asked and answered sometime in the last 22 years - an amazing resource! Here's one I couldn't find though: The TLDR of my long explanation below is that I'm wondering if anyone has any input on the appropriate size fuse to use for the wiring leading to the power lift winch. Will 30 Amps be too small? I am doing some preliminary wiring fixes before we launch. A prior owner made some sloppy electrical additions, including a bunch of wire nut connections and other funky things that I want to clean up. Thanks to a recommendation here, I got a copy of "Sailboat Electrics Simplified" and have been working my way through understanding everything. One major issue seems to be that only a few of the (many!) wires leading out of the positive battery terminals have fuses. I'm planning to remedy this by adding some terminal mount fuse blocks, with a separate fuse for each outgoing wire. One of the wires that is not fuse protected is the one that leads from the starter battery to the terminal connection in the lazarette. Previously, this terminal connection also powered the electric start outboard, but we've removed the gas outboard and switched to a battery powered epropulsion spirit - so we no longer need this terminal to do anything except power the winch for the lift, and power a separate line to an existing 12 v outlet in the cockpit. I doubt we'll use the 12v outlet at the same time as the power lift, but it's possible we could forget something is plugged in. The wire leading from the "starter" battery to this terminal appears to be 10 AWG, although it's not actually labeled and is a little larger in diameter than the labeled 10 AWG wire that runs from the terminal to the winch. The winch is a Bad Land 2500 ATV winch and doesn't appear to have any legible labeling about its power draw or fuse size. The manual for a similar winch has a chart showing a huge range in Amp draw from 10 - 132, with 10 Amps when pulling 0 kg at 4.1 mph and 55 amps when pulling 1000kg at 2.5 mph. Based on that and the rule about sizing the fuse to save the wire, I'm thinking about trying a 30 amp fuse. The type of battery mount terminal blocks available for 30 amps and below and 30 amps and above are different, so it wouldn't be a matter of just changing out the fuse if I initially go too small (For those interested, I'm planning to use the Blue Sea ST-Blade Battery Terminal Mount Fuse Block - 5023 for everything else. For this use, would be choosing between that and Blue Sea Systems Single MRBF Terminal Fuse Block - 5191). The larger MRBF fuses also seem like a specialty marine item that has to be special ordered - much less convenient for potential future replacement than the blade fuses available at my hardware store. So, any thoughts or input on this? Do others have fuses on this wire? If so, what size? If not, am I being overly cautious in installing a fuse here? Thanks, all! RosieSee the original archive post