The Rhodes 22 Discussion Group R22 Discussion Group

The Rhodes 22 Discussion Group


< prior

Back to Month

Go to Thread

Member Picture

Mark Whipple



Pressuring washing a boat

2024-06-15; 12:27:36 EDT

Member Since

2019-10-09

Posts: 120

I have a mooring in Boston Harbor and I've used ablative paint for many years. Depending on the type and amount of growth on the bottom when I haul out, I might use a long brush, pressure from a garden hose, or a pressure washer at distance. If there's lots of hard growth (barnacles etc) then scraping might be the best option. The people who tend to use non-ablative bottom paint at my boat club are power boaters who typically travel at faster speeds than sailboats and racers who want the least resistance on their hull and will sometimes clean their hull before a race.

When cleaning the deck, cockpit, cabin top etc. I try to keep the pressure low because gel coat tends to become porous over time and I worry about driving the dirt into the gel coat.

Mark


Boston, MA
2000 R22 *When and If*


See the original archive post
×

Message to Webmaster:

To use your email application to send a messsage to the webmaster rather than this form, .



×

Post to the Rhodes 22 Email List:



×

Sending Post:

Your post is being sent... waiting