The compression post on the R22 is not directly under the mast - but it’s close enough to do the job because the cabin top is made of thick plywood.
From y experience wit h da list, the bottom of the compression post is susceptible to rot.
Check the bottom of your post.
Ric
Dadventure
Richard F. Stott, AIA, LEED AP
ric at stottarchitecture.com
O -631-283-1777
C- 516-965-3164
> On Jun 26, 2024, at 12:50 PM, Matt Wilson <mwhornblower at gmail.com> wrote:
>> Just to clarify, this picture looks like mine and the post you referenced
> is not directly h set the mast. So if that is the normal set up and my
> cabin roof is slightly sagging, what could be the cause and what should I
> do to remedy this? I like the idea of a curtain for the head because the
> door is in the way. Perhaps adding an additional post would fix the problem?
>> Many thanks all,
> Matt
>> On Wed, Jun 26, 2024 at 11:00 AM Matt Wilson <mwhornblower at gmail.com> wrote:
>>> But that is not directly under the mast is it?
>>>> On Wed, Jun 26, 2024 at 10:26 AM peter beckerman via Rhodes22-list <
>>rhodes22-list at rhodes22.org> wrote:
>>>>> The arrow points to the compression post on the attached pic of cabin
>>> with "swell head"
>>>>>>>>> Peter
>>>>>> [ Sent From rhodes22.net ]
>>>>>> -------------- next part --------------
>>> A non-text attachment was scrubbed...
>>> Name: Polish_20240626_112420104.jpg
>>> Type: image/jpeg
>>> Size: 184529 bytes
>>> Desc: not available
>>> URL: <
>>>http://rhodes22.org/pipermail/rhodes22-list/attachments/20240626/b9fb7677/attachment.jpg>>>>>>>>>
×
Message to Webmaster:
To use your email application to send a messsage to the webmaster rather than this form,
.