The Rhodes 22 Discussion Group R22 Discussion Group

The Rhodes 22 Discussion Group


< prior

Back to Month

Go to Thread

Member Picture

Peter Nyberg



Mast step issues?

2024-06-27; 09:08:34 EDT

Member Since

2016-04-14

Posts: 711

I've just gone back through this whole thread to try to make sense of it.  I've reached some conclusions:

1) There obviously _is_ a compression post.

2) This boat is configured with the fully enclosed 'swell head'.

3) Based on pictures and the attached 'floor plan', it seems that the compression post in a 'swell head' layout is well forward of the of the position it occupies in the 'standard' layout. Perhaps someone else with a 'swell head' layout can confirm.

4) This also puts the compression post well forward of the mast (way too far forward for my liking).

5) In general, it seems that this arrangement works anyway, but is clearly failing on Matt's boat.

6) But, in order for this to work, the deck needs to be very strong in order for it to 'carry' the load from where the mast is to where the compression post is.

7) Matt's deck isn't doing the job.

So, my guess is there's rot in the deck. Otherwise, it wouldn't bend like that. The possibility that there's also rot under the cabin floor should obviously be considered as well.

I have doubts that any reasonable repair could restore the full original strength of the deck.  Therefor, I think it likely that another compression post more directly under the mast will need to added. (But the deck should be fixed too.)

That's my best guess, anyway.

Peter Nyberg
Coventry, CT
s/v Silverheels (1988/2016)



[ Sent From rhodes22.net ]


enclosed head floor plan.jpg
See the original archive post
×

Message to Webmaster:

To use your email application to send a messsage to the webmaster rather than this form, .



×

Post to the Rhodes 22 Email List:



×

Sending Post:

Your post is being sent... waiting