The Rhodes 22 Discussion Group R22 Discussion Group

The Rhodes 22 Discussion Group


< prior

Back to Month

Go to Thread

Member Picture

ROGER PIHLAJA



How to replace forward lower chainplates?

2024-07-30; 11:47:01 EDT

Member Since

2002-08-01

Posts: 1438

Hi All,

One of the first things I replaced when I bought my boat back in 1987 were the four lower chainplates.  There is no way to inspect the factory OEM lower chainplates.  Sooner or later, water is going to infiltrate into the plywood core, causing it to rot.  This is easily fixed by installing 4 Beckson 4-1/2" white screw-out deck plates (Beckson P/N: DP40-W, Defender Marine C/N: 941619, $17.36 each + S&H) thru the cabin liner.  With these inspection plates installed, you can thru bolt the lower chainplates thru the outer cabin wall and easily inspect them whenever you wish.  I do not trust wood screws into the plywood core for this heavily loaded component, especially not when the fix is so easy.  Just bite the bullet and do this upgrade.  You'll never have to worry about it again.

Roger Pihlaja
S/V Dynamic Equilibrium
1978  Sanford, MI

Chainplate.JPG
See the original archive post
×

Message to Webmaster:

To use your email application to send a messsage to the webmaster rather than this form, .



×

Post to the Rhodes 22 Email List:



×

Sending Post:

Your post is being sent... waiting