< prior
Back to Month
Go to Thread
2024-08-05; 19:56:17 EDT
Member Since
2010-08-05
Posts: 214
Stan’s team did a good job installing the Air Head, but I should br honest and say it’s never actually been used. I’ve only been a day sailer and everyone has been comfortable waiting til we get back to the dock. The Air Head is taller than a marine toilet, but you just open the hatch above it and enjoy the view. Or that’s the theory. *>>>>>>>>> *[image: Sailboat on Messenger]*<<<<<<<<<* *Peter Klappert5012 Bay State Road Palmetto, FL 34221*See the original archive post
On Mon, Aug 5, 2024 at 7:20 PM <rhodes22-list-request at rhodes22.org> wrote: > Send Rhodes22-list mailing list submissions to > rhodes22-list at rhodes22.org > > To subscribe or unsubscribe via the World Wide Web, visit > http://rhodes22.org/mailman/listinfo/rhodes22-list > or, via email, send a message with subject or body 'help' to > rhodes22-list-request at rhodes22.org > > You can reach the person managing the list at > rhodes22-list-owner at rhodes22.org > > When replying, please edit your Subject line so it is more specific > than "Re: Contents of Rhodes22-list digest..." > > > Today's Topics: > > 1. Re: How to replace forward lower chainplates? (Todd Tavares) > 2. Re: How to replace forward lower chainplates? (ROGER PIHLAJA) > 3. Re: How to replace forward lower chainplates? (Todd Tavares) > 4. Re: How to replace forward lower chainplates? > (mm.bizlist1 at gmail.com) > 5. Re: How to replace forward lower chainplates? (Scott Andrews) > 6. Re: head ventilation (Rhodes22-list Digest, Vol 4576), Issue > 1 (Chris Geankoplis) > > > ---------------------------------------------------------------------- > > Message: 1 > Date: Sat, 3 Aug 2024 19:21:55 -0400 > From: Todd Tavares <tavares0947 at gmail.com> > To: The Rhodes 22 Email List <rhodes22-list at rhodes22.org> > Subject: Re: [Rhodes22-list] How to replace forward lower chainplates? > Message-ID: > < > CAB-twMPpC4-xdU3yf5OKRusieTxhdR_7e8BbALctARw-kEoXhw at mail.gmail.com> > Content-Type: text/plain; charset="utf-8" > > Mike, > > Roger has come up with the best way of repairing and or replacing the lower > shroud chainplates. > He posted pictures, but they did not come through on my end. By cutting the > chainplate off flush where it comes out through the cabin top, thus > removing most of the bend, you should be able to fish the piece out without > cutting down the side, or using the die grinder. > > You will however have to cut rectangular hole lower in the side to > reinforce the side outer cabin wall and mount the new chainplates. > > Todd T. > > On Fri, Aug 2, 2024, 4:45 PM <mm.bizlist1 at gmail.com> wrote: > > > Roger and Todd, > > > > Before I start cutting holes in my boat, I want to make sure I understand > > the full process, so please let me know if I am misunderstanding > > anything. > > > > The original chainplate is bent in an L-shape and screwed to plywood > inside > > the ceiling of the cabin with one or two wood screws. To remove the old > > chainplate, you need to open a hole in the ceiling liner. In Todd's > case, > > he also needed to open some of adjacent sidewall of the cabin to gain > > sufficient clearance to extract the old chainplate. Roger, did you need > to > > do that also, or did you use a different approach? > > > > In any event, the hole in the ceiling needs to be repaired afterwards. > Was > > there much difficulty in achieving a clean repair of the ceiling liner? > > > > A second hole of the correct size for the deckplate inspection port is > > drilled in the inside sidewall liner below the chainplate opening. A > > backing plate (1/4" plywood?) is epoxied inside of the outer layer of the > > cabin sidewall. The new chainplate is through-bolted to the backing > plate. > > Finally, the deckplate is installed to the inside liner of the cabin as > an > > inspection port. > > > > Is the above description correct? > > > > Thanks, > > > > Mike > > > > -----Original Message----- > > From: Rhodes22-list <rhodes22-list-bounces at rhodes22.org> On Behalf Of > > ROGER > > PIHLAJA > > Sent: Friday, August 2, 2024 12:59 PM > > To: 'The Rhodes 22 Email List' <rhodes22-list at rhodes22.org> > > Subject: Re: [Rhodes22-list] How to replace forward lower chainplates? > > > > You use something like a hole saw to make a 4-1/2" ID hole in the cabin > > liner. This will expose the plywood core and the old chainplate. Remove > > the old chainplate and any plywood that's in the way, install a new > > chainplate made of straight SS bar stock, (Note that this new chainplate > > goes thru the original hole in the cabin roof) and thru bolt it thru the > > outer cabin wall. Then, install the Beckson inspection plate. Easy > peasy, > > it takes about 30 minutes to do each chainplate. You can easily do all 4 > > inner chainplates in an afternoon. Other than two round head machine > > screws > > + fender washers on the side of the cabin at each chain plate and 4 > Beckson > > inspection plates in the cabin, the installation will look stock. But, > > you > > will be able to inspect/repair/replace the 4 inner chainplates whenever > you > > want. > > > > Roger Pihlaja > > S/V Dynamic Equilibrium > > 1978 Sanford, MI > > > > Roger Pihlaja > > > > ________________________________ > > From: Rhodes22-list <rhodes22-list-bounces at rhodes22.org> on behalf of > > mm.bizlist1 at gmail.com <mm.bizlist1 at gmail.com> > > Sent: Friday, August 2, 2024 12:40 PM > > To: 'The Rhodes 22 Email List' <rhodes22-list at rhodes22.org> > > Subject: Re: [Rhodes22-list] How to replace forward lower chainplates? > > > > Roger, how did you remove the existing chainplates? Did you have to open > > up > > the cabin liner? > > > > -----Original Message----- > > From: Rhodes22-list <rhodes22-list-bounces at rhodes22.org> On Behalf Of > > ROGER > > PIHLAJA > > Sent: Tuesday, July 30, 2024 11:47 AM > > To: The Rhodes 22 Email List <rhodes22-list at rhodes22.org> > > Subject: Re: [Rhodes22-list] How to replace forward lower chainplates? > > > > Hi All, > > > > One of the first things I replaced when I bought my boat back in 1987 > were > > the four lower chainplates. There is no way to inspect the factory OEM > > lower chainplates. Sooner or later, water is going to infiltrate into > the > > plywood core, causing it to rot. This is easily fixed by installing 4 > > Beckson 4-1/2" white screw-out deck plates (Beckson P/N: DP40-W, Defender > > Marine C/N: 941619, $17.36 each + S&H) thru the cabin liner. With these > > inspection plates installed, you can thru bolt the lower chainplates thru > > the outer cabin wall and easily inspect them whenever you wish. I do not > > trust wood screws into the plywood core for this heavily loaded > component, > > especially not when the fix is so easy. Just bite the bullet and do this > > upgrade. You'll never have to worry about it again. > > > > Roger Pihlaja > > S/V Dynamic Equilibrium > > 1978 Sanford, MI > > ________________________________ > > From: Rhodes22-list <rhodes22-list-bounces at rhodes22.org> on behalf of > > Graham > > Stewart <gstewart.gm at gmail.com> > > Sent: Tuesday, July 30, 2024 10:16 AM > > To: The Rhodes 22 Email List <rhodes22-list at rhodes22.org> > > Subject: Re: [Rhodes22-list] How to replace forward lower chainplates? > > > > The chain plate is a bent stainless-steel tang. Mine was held in place > with > > a single screw into the plywood core of the cabin top. I have attached a > > picture of the chainplate. Knowing the width, you should be able to > > calculate pretty accurately where the screw would be. Removing a section > of > > the liner should allow you to remove the screw without needing to create > a > > large hole. > > > > > > Graham Stewart > > Rhodes 22 > > Agile, 1976 > > ________________________________ > > From: Rhodes22-list <rhodes22-list-bounces at rhodes22.org> on behalf of > > Michael McKay <mm.bizlist1 at gmail.com> > > Sent: Sunday, July 28, 2024 4:59 PM > > To: rhodes22-list at rhodes22.org <rhodes22-list at rhodes22.org> > > Subject: [Rhodes22-list] How to replace forward lower chainplates? > > > > Hi Rhodies, > > > > I damaged one of my forward lower chainplates and need to replace it. > > > > It is evidently attached to something between the inner and outer > > fiberglass skins, so my plan would be to cut an access hole from the > > inside. > > > > Can you provide any guidance about how best to approach this project? > > > > Thank you! > > > > Mike McKay > > S/V Liber 2006/2108 > > Allatoona Lake, GA > > > > > > > > > > Michael McKay > > (630) 209-2054 (m) > > > > Sent from my iPhone > > -------------- next part -------------- > > A non-text attachment was scrubbed... > > Name: Chainplate.JPG > > Type: image/jpeg > > Size: 89771 bytes > > Desc: Chainplate.JPG > > URL: > > < > > > https://na01.safelinks.protection.outlook.com/?url=http%3A%2F%2Frhodes22.or > > > > > %2F&data=05%7C02%7C%7Ca7967458efd14c4dfe5208dcb311e4b4%7C84df9e7fe9f640afb43 > > > > > 5aaaaaaaaaaaa%7C1%7C0%7C638582136698053942%7CUnknown%7CTWFpbGZsb3d8eyJWIjoiM > > < > https://na01.safelinks.protection.outlook.com/?url=http%3A%2F%2Frhodes22.or%2F&data=05%7C02%7C%7Ca7967458efd14c4dfe5208dcb311e4b4%7C84df9e7fe9f640afb435aaaaaaaaaaaa%7C1%7C0%7C638582136698053942%7CUnknown%7CTWFpbGZsb3d8eyJWIjoiM > > > > > > > C4wLjAwMDAiLCJQIjoiV2luMzIiLCJBTiI6Ik1haWwiLCJXVCI6Mn0%3D%7C0%7C%7C%7C&sdata > > =HFyik%2FmRwx69hWRMx5DoANJs6BFU28nstLPKXS2SNCc%3D&reserved=0 > > > > > g%2Fpipermail%2Frhodes22-list%2Fattachments%2F20240730%2F05e2d6ca%2Fattachme > > > > > nt.jpe&data=05%7C02%7C%7C00aa48bcb418480360ad08dcb0a2310f%7C84df9e7fe9f640af > > > > > b435aaaaaaaaaaaa%7C1%7C0%7C638579458073076816%7CUnknown%7CTWFpbGZsb3d8eyJWIj > > > > > oiMC4wLjAwMDAiLCJQIjoiV2luMzIiLCJBTiI6Ik1haWwiLCJXVCI6Mn0%3D%7C0%7C%7C%7C&sd > > ata=%2FLnNro58IDe1WwpfkGbccN3v%2BccS0DNfMm%2BIOWMHbeg%3D&reserved=0< > > http://r > > > > > hodes22.org/pipermail/rhodes22-list/attachments/20240730/05e2d6ca/attachment > > .jpe>> > > > > > > > > ------------------------------ > > Message: 2 > Date: Sun, 4 Aug 2024 01:40:28 +0000 > From: ROGER PIHLAJA <roger_pihlaja at msn.com> > To: The Rhodes 22 Email List <rhodes22-list at rhodes22.org> > Subject: Re: [Rhodes22-list] How to replace forward lower chainplates? > Message-ID: > < > MN2PR10MB428849A47AE19B9611EA4C7380BD2 at MN2PR10MB4288.namprd10.prod.outlook.com > > > > Content-Type: text/plain; charset="utf-8" > > Todd, > > I sent the photos as a .pdf attachment. Doesn?t that work anymore? If > you give me your email address, I?ll resend the photos to you. > > Roger Pihlaja > S/V Dynamic Equilibrium > 1978. Sanford, MI > > Sent from my iPhone > > > On Aug 3, 2024, at 7:22?PM, Todd Tavares <tavares0947 at gmail.com> wrote: > > > > ?Mike, > > > > Roger has come up with the best way of repairing and or replacing the > lower > > shroud chainplates. > > He posted pictures, but they did not come through on my end. By cutting > the > > chainplate off flush where it comes out through the cabin top, thus > > removing most of the bend, you should be able to fish the piece out > without > > cutting down the side, or using the die grinder. > > > > You will however have to cut rectangular hole lower in the side to > > reinforce the side outer cabin wall and mount the new chainplates. > > > > Todd T. > > > >> On Fri, Aug 2, 2024, 4:45 PM <mm.bizlist1 at gmail.com> wrote: > >> > >> Roger and Todd, > >> > >> Before I start cutting holes in my boat, I want to make sure I > understand > >> the full process, so please let me know if I am misunderstanding > >> anything. > >> > >> The original chainplate is bent in an L-shape and screwed to plywood > inside > >> the ceiling of the cabin with one or two wood screws. To remove the old > >> chainplate, you need to open a hole in the ceiling liner. In Todd's > case, > >> he also needed to open some of adjacent sidewall of the cabin to gain > >> sufficient clearance to extract the old chainplate. Roger, did you > need to > >> do that also, or did you use a different approach? > >> > >> In any event, the hole in the ceiling needs to be repaired afterwards. > Was > >> there much difficulty in achieving a clean repair of the ceiling liner? > >> > >> A second hole of the correct size for the deckplate inspection port is > >> drilled in the inside sidewall liner below the chainplate opening. A > >> backing plate (1/4" plywood?) is epoxied inside of the outer layer of > the > >> cabin sidewall. The new chainplate is through-bolted to the backing > plate. > >> Finally, the deckplate is installed to the inside liner of the cabin as > an > >> inspection port. > >> > >> Is the above description correct? > >> > >> Thanks, > >> > >> Mike > >> > >> -----Original Message----- > >> From: Rhodes22-list <rhodes22-list-bounces at rhodes22.org> On Behalf Of > >> ROGER > >> PIHLAJA > >> Sent: Friday, August 2, 2024 12:59 PM > >> To: 'The Rhodes 22 Email List' <rhodes22-list at rhodes22.org> > >> Subject: Re: [Rhodes22-list] How to replace forward lower chainplates? > >> > >> You use something like a hole saw to make a 4-1/2" ID hole in the cabin > >> liner. This will expose the plywood core and the old chainplate. > Remove > >> the old chainplate and any plywood that's in the way, install a new > >> chainplate made of straight SS bar stock, (Note that this new chainplate > >> goes thru the original hole in the cabin roof) and thru bolt it thru > the > >> outer cabin wall. Then, install the Beckson inspection plate. Easy > peasy, > >> it takes about 30 minutes to do each chainplate. You can easily do all > 4 > >> inner chainplates in an afternoon. Other than two round head machine > >> screws > >> + fender washers on the side of the cabin at each chain plate and 4 > Beckson > >> inspection plates in the cabin, the installation will look stock. But, > >> you > >> will be able to inspect/repair/replace the 4 inner chainplates whenever > you > >> want. > >> > >> Roger Pihlaja > >> S/V Dynamic Equilibrium > >> 1978 Sanford, MI > >> > >> Roger Pihlaja > >> > >> ________________________________ > >> From: Rhodes22-list <rhodes22-list-bounces at rhodes22.org> on behalf of > >> mm.bizlist1 at gmail.com <mm.bizlist1 at gmail.com> > >> Sent: Friday, August 2, 2024 12:40 PM > >> To: 'The Rhodes 22 Email List' <rhodes22-list at rhodes22.org> > >> Subject: Re: [Rhodes22-list] How to replace forward lower chainplates? > >> > >> Roger, how did you remove the existing chainplates? Did you have to > open > >> up > >> the cabin liner? > >> > >> -----Original Message----- > >> From: Rhodes22-list <rhodes22-list-bounces at rhodes22.org> On Behalf Of > >> ROGER > >> PIHLAJA > >> Sent: Tuesday, July 30, 2024 11:47 AM > >> To: The Rhodes 22 Email List <rhodes22-list at rhodes22.org> > >> Subject: Re: [Rhodes22-list] How to replace forward lower chainplates? > >> > >> Hi All, > >> > >> One of the first things I replaced when I bought my boat back in 1987 > were > >> the four lower chainplates. There is no way to inspect the factory OEM > >> lower chainplates. Sooner or later, water is going to infiltrate into > the > >> plywood core, causing it to rot. This is easily fixed by installing 4 > >> Beckson 4-1/2" white screw-out deck plates (Beckson P/N: DP40-W, > Defender > >> Marine C/N: 941619, $17.36 each + S&H) thru the cabin liner. With these > >> inspection plates installed, you can thru bolt the lower chainplates > thru > >> the outer cabin wall and easily inspect them whenever you wish. I do > not > >> trust wood screws into the plywood core for this heavily loaded > component, > >> especially not when the fix is so easy. Just bite the bullet and do > this > >> upgrade. You'll never have to worry about it again. > >> > >> Roger Pihlaja > >> S/V Dynamic Equilibrium > >> 1978 Sanford, MI > >> ________________________________ > >> From: Rhodes22-list <rhodes22-list-bounces at rhodes22.org> on behalf of > >> Graham > >> Stewart <gstewart.gm at gmail.com> > >> Sent: Tuesday, July 30, 2024 10:16 AM > >> To: The Rhodes 22 Email List <rhodes22-list at rhodes22.org> > >> Subject: Re: [Rhodes22-list] How to replace forward lower chainplates? > >> > >> The chain plate is a bent stainless-steel tang. Mine was held in place > with > >> a single screw into the plywood core of the cabin top. I have attached a > >> picture of the chainplate. Knowing the width, you should be able to > >> calculate pretty accurately where the screw would be. Removing a > section of > >> the liner should allow you to remove the screw without needing to > create a > >> large hole. > >> > >> > >> Graham Stewart > >> Rhodes 22 > >> Agile, 1976 > >> ________________________________ > >> From: Rhodes22-list <rhodes22-list-bounces at rhodes22.org> on behalf of > >> Michael McKay <mm.bizlist1 at gmail.com> > >> Sent: Sunday, July 28, 2024 4:59 PM > >> To: rhodes22-list at rhodes22.org <rhodes22-list at rhodes22.org> > >> Subject: [Rhodes22-list] How to replace forward lower chainplates? > >> > >> Hi Rhodies, > >> > >> I damaged one of my forward lower chainplates and need to replace it. > >> > >> It is evidently attached to something between the inner and outer > >> fiberglass skins, so my plan would be to cut an access hole from the > >> inside. > >> > >> Can you provide any guidance about how best to approach this project? > >> > >> Thank you! > >> > >> Mike McKay > >> S/V Liber 2006/2108 > >> Allatoona Lake, GA > >> > >> > >> > >> > >> Michael McKay > >> (630) 209-2054 (m) > >> > >> Sent from my iPhone > >> -------------- next part -------------- > >> A non-text attachment was scrubbed... > >> Name: Chainplate.JPG > >> Type: image/jpeg > >> Size: 89771 bytes > >> Desc: Chainplate.JPG > >> URL: > >> < > >> http://rhodes22.or/ > >> > >> > %2F&data=05%7C02%7C%7Ca7967458efd14c4dfe5208dcb311e4b4%7C84df9e7fe9f640afb43 > >> > >> > 5aaaaaaaaaaaa%7C1%7C0%7C638582136698053942%7CUnknown%7CTWFpbGZsb3d8eyJWIjoiM > >> <http://rhodes22.or/> > >> > >> > C4wLjAwMDAiLCJQIjoiV2luMzIiLCJBTiI6Ik1haWwiLCJXVCI6Mn0%3D%7C0%7C%7C%7C&sdata > >> =HFyik%2FmRwx69hWRMx5DoANJs6BFU28nstLPKXS2SNCc%3D&reserved=0 > >> > >> > g%2Fpipermail%2Frhodes22-list%2Fattachments%2F20240730%2F05e2d6ca%2Fattachme > >> > >> > nt.jpe&data=05%7C02%7C%7C00aa48bcb418480360ad08dcb0a2310f%7C84df9e7fe9f640af > >> > >> > b435aaaaaaaaaaaa%7C1%7C0%7C638579458073076816%7CUnknown%7CTWFpbGZsb3d8eyJWIj > >> > >> > oiMC4wLjAwMDAiLCJQIjoiV2luMzIiLCJBTiI6Ik1haWwiLCJXVCI6Mn0%3D%7C0%7C%7C%7C&sd > >> ata=%2FLnNro58IDe1WwpfkGbccN3v%2BccS0DNfMm%2BIOWMHbeg%3D&reserved=0< > >> http://r > >> > >> > hodes22.org/pipermail/rhodes22-list/attachments/20240730/05e2d6ca/attachment > >> .jpe>> > >> > >> > >> > > ------------------------------ > > Message: 3 > Date: Sat, 3 Aug 2024 23:15:59 -0400 > From: Todd Tavares <tavares0947 at gmail.com> > To: The Rhodes 22 Email List <rhodes22-list at rhodes22.org> > Subject: Re: [Rhodes22-list] How to replace forward lower chainplates? > Message-ID: > <CAB-twMO5ugs4A= > 0yap0yvZWFBgPAy9O_2WqS00uZRg48ocy5_Q at mail.gmail.com> > Content-Type: text/plain; charset="utf-8" > > Roger, > > Eventually two pictures came through. There was also another link that > tried to download but stalled. > > I just wanted to stress to Michael that your way was far better than any > other...especially better than my way. > > When you wrote about cutting the chainplate off that protrudes above the > cabin roof, it was face palm moment. Why didn't I think of that. > > Todd T. > > On Sat, Aug 3, 2024, 10:05 PM ROGER PIHLAJA <roger_pihlaja at msn.com> wrote: > > > Todd, > > > > I sent the photos as a .pdf attachment. Doesn?t that work anymore? If > > you give me your email address, I?ll resend the photos to you. > > > > Roger Pihlaja > > S/V Dynamic Equilibrium > > 1978. Sanford, MI > > > > Sent from my iPhone > > > > > On Aug 3, 2024, at 7:22?PM, Todd Tavares <tavares0947 at gmail.com> > wrote: > > > > > > ?Mike, > > > > > > Roger has come up with the best way of repairing and or replacing the > > lower > > > shroud chainplates. > > > He posted pictures, but they did not come through on my end. By cutting > > the > > > chainplate off flush where it comes out through the cabin top, thus > > > removing most of the bend, you should be able to fish the piece out > > without > > > cutting down the side, or using the die grinder. > > > > > > You will however have to cut rectangular hole lower in the side to > > > reinforce the side outer cabin wall and mount the new chainplates. > > > > > > Todd T. > > > > > >> On Fri, Aug 2, 2024, 4:45 PM <mm.bizlist1 at gmail.com> wrote: > > >> > > >> Roger and Todd, > > >> > > >> Before I start cutting holes in my boat, I want to make sure I > > understand > > >> the full process, so please let me know if I am misunderstanding > > >> anything. > > >> > > >> The original chainplate is bent in an L-shape and screwed to plywood > > inside > > >> the ceiling of the cabin with one or two wood screws. To remove the > old > > >> chainplate, you need to open a hole in the ceiling liner. In Todd's > > case, > > >> he also needed to open some of adjacent sidewall of the cabin to gain > > >> sufficient clearance to extract the old chainplate. Roger, did you > > need to > > >> do that also, or did you use a different approach? > > >> > > >> In any event, the hole in the ceiling needs to be repaired afterwards. > > Was > > >> there much difficulty in achieving a clean repair of the ceiling > liner? > > >> > > >> A second hole of the correct size for the deckplate inspection port is > > >> drilled in the inside sidewall liner below the chainplate opening. A > > >> backing plate (1/4" plywood?) is epoxied inside of the outer layer of > > the > > >> cabin sidewall. The new chainplate is through-bolted to the backing > > plate. > > >> Finally, the deckplate is installed to the inside liner of the cabin > as > > an > > >> inspection port. > > >> > > >> Is the above description correct? > > >> > > >> Thanks, > > >> > > >> Mike > > >> > > >> -----Original Message----- > > >> From: Rhodes22-list <rhodes22-list-bounces at rhodes22.org> On Behalf Of > > >> ROGER > > >> PIHLAJA > > >> Sent: Friday, August 2, 2024 12:59 PM > > >> To: 'The Rhodes 22 Email List' <rhodes22-list at rhodes22.org> > > >> Subject: Re: [Rhodes22-list] How to replace forward lower chainplates? > > >> > > >> You use something like a hole saw to make a 4-1/2" ID hole in the > cabin > > >> liner. This will expose the plywood core and the old chainplate. > > Remove > > >> the old chainplate and any plywood that's in the way, install a new > > >> chainplate made of straight SS bar stock, (Note that this new > chainplate > > >> goes thru the original hole in the cabin roof) and thru bolt it thru > > the > > >> outer cabin wall. Then, install the Beckson inspection plate. Easy > > peasy, > > >> it takes about 30 minutes to do each chainplate. You can easily do > all > > 4 > > >> inner chainplates in an afternoon. Other than two round head machine > > >> screws > > >> + fender washers on the side of the cabin at each chain plate and 4 > > Beckson > > >> inspection plates in the cabin, the installation will look stock. > But, > > >> you > > >> will be able to inspect/repair/replace the 4 inner chainplates > whenever > > you > > >> want. > > >> > > >> Roger Pihlaja > > >> S/V Dynamic Equilibrium > > >> 1978 Sanford, MI > > >> > > >> Roger Pihlaja > > >> > > >> ________________________________ > > >> From: Rhodes22-list <rhodes22-list-bounces at rhodes22.org> on behalf of > > >> mm.bizlist1 at gmail.com <mm.bizlist1 at gmail.com> > > >> Sent: Friday, August 2, 2024 12:40 PM > > >> To: 'The Rhodes 22 Email List' <rhodes22-list at rhodes22.org> > > >> Subject: Re: [Rhodes22-list] How to replace forward lower chainplates? > > >> > > >> Roger, how did you remove the existing chainplates? Did you have to > > open > > >> up > > >> the cabin liner? > > >> > > >> -----Original Message----- > > >> From: Rhodes22-list <rhodes22-list-bounces at rhodes22.org> On Behalf Of > > >> ROGER > > >> PIHLAJA > > >> Sent: Tuesday, July 30, 2024 11:47 AM > > >> To: The Rhodes 22 Email List <rhodes22-list at rhodes22.org> > > >> Subject: Re: [Rhodes22-list] How to replace forward lower chainplates? > > >> > > >> Hi All, > > >> > > >> One of the first things I replaced when I bought my boat back in 1987 > > were > > >> the four lower chainplates. There is no way to inspect the factory > OEM > > >> lower chainplates. Sooner or later, water is going to infiltrate into > > the > > >> plywood core, causing it to rot. This is easily fixed by installing 4 > > >> Beckson 4-1/2" white screw-out deck plates (Beckson P/N: DP40-W, > > Defender > > >> Marine C/N: 941619, $17.36 each + S&H) thru the cabin liner. With > these > > >> inspection plates installed, you can thru bolt the lower chainplates > > thru > > >> the outer cabin wall and easily inspect them whenever you wish. I do > > not > > >> trust wood screws into the plywood core for this heavily loaded > > component, > > >> especially not when the fix is so easy. Just bite the bullet and do > > this > > >> upgrade. You'll never have to worry about it again. > > >> > > >> Roger Pihlaja > > >> S/V Dynamic Equilibrium > > >> 1978 Sanford, MI > > >> ________________________________ > > >> From: Rhodes22-list <rhodes22-list-bounces at rhodes22.org> on behalf of > > >> Graham > > >> Stewart <gstewart.gm at gmail.com> > > >> Sent: Tuesday, July 30, 2024 10:16 AM > > >> To: The Rhodes 22 Email List <rhodes22-list at rhodes22.org> > > >> Subject: Re: [Rhodes22-list] How to replace forward lower chainplates? > > >> > > >> The chain plate is a bent stainless-steel tang. Mine was held in place > > with > > >> a single screw into the plywood core of the cabin top. I have > attached a > > >> picture of the chainplate. Knowing the width, you should be able to > > >> calculate pretty accurately where the screw would be. Removing a > > section of > > >> the liner should allow you to remove the screw without needing to > > create a > > >> large hole. > > >> > > >> > > >> Graham Stewart > > >> Rhodes 22 > > >> Agile, 1976 > > >> ________________________________ > > >> From: Rhodes22-list <rhodes22-list-bounces at rhodes22.org> on behalf of > > >> Michael McKay <mm.bizlist1 at gmail.com> > > >> Sent: Sunday, July 28, 2024 4:59 PM > > >> To: rhodes22-list at rhodes22.org <rhodes22-list at rhodes22.org> > > >> Subject: [Rhodes22-list] How to replace forward lower chainplates? > > >> > > >> Hi Rhodies, > > >> > > >> I damaged one of my forward lower chainplates and need to replace it. > > >> > > >> It is evidently attached to something between the inner and outer > > >> fiberglass skins, so my plan would be to cut an access hole from the > > >> inside. > > >> > > >> Can you provide any guidance about how best to approach this project? > > >> > > >> Thank you! > > >> > > >> Mike McKay > > >> S/V Liber 2006/2108 > > >> Allatoona Lake, GA > > >> > > >> > > >> > > >> > > >> Michael McKay > > >> (630) 209-2054 (m) > > >> > > >> Sent from my iPhone > > >> -------------- next part -------------- > > >> A non-text attachment was scrubbed... > > >> Name: Chainplate.JPG > > >> Type: image/jpeg > > >> Size: 89771 bytes > > >> Desc: Chainplate.JPG > > >> URL: > > >> < > > >> http://rhodes22.or/ > > >> > > >> > > > %2F&data=05%7C02%7C%7Ca7967458efd14c4dfe5208dcb311e4b4%7C84df9e7fe9f640afb43 > > >> > > >> > > > 5aaaaaaaaaaaa%7C1%7C0%7C638582136698053942%7CUnknown%7CTWFpbGZsb3d8eyJWIjoiM > > >> <http://rhodes22.or/> > > >> > > >> > > > C4wLjAwMDAiLCJQIjoiV2luMzIiLCJBTiI6Ik1haWwiLCJXVCI6Mn0%3D%7C0%7C%7C%7C&sdata > > >> =HFyik%2FmRwx69hWRMx5DoANJs6BFU28nstLPKXS2SNCc%3D&reserved=0 > > >> > > >> > > > g%2Fpipermail%2Frhodes22-list%2Fattachments%2F20240730%2F05e2d6ca%2Fattachme > > >> > > >> > > > nt.jpe&data=05%7C02%7C%7C00aa48bcb418480360ad08dcb0a2310f%7C84df9e7fe9f640af > > >> > > >> > > > b435aaaaaaaaaaaa%7C1%7C0%7C638579458073076816%7CUnknown%7CTWFpbGZsb3d8eyJWIj > > >> > > >> > > > oiMC4wLjAwMDAiLCJQIjoiV2luMzIiLCJBTiI6Ik1haWwiLCJXVCI6Mn0%3D%7C0%7C%7C%7C&sd > > >> ata=%2FLnNro58IDe1WwpfkGbccN3v%2BccS0DNfMm%2BIOWMHbeg%3D&reserved=0< > > >> http://r > > >> > > >> > > > hodes22.org/pipermail/rhodes22-list/attachments/20240730/05e2d6ca/attachment > > >> .jpe>> > > >> > > >> > > >> > > > > ------------------------------ > > Message: 4 > Date: Sun, 4 Aug 2024 12:27:53 -0400 > From: <mm.bizlist1 at gmail.com> > To: "'The Rhodes 22 Email List'" <rhodes22-list at rhodes22.org> > Subject: Re: [Rhodes22-list] How to replace forward lower chainplates? > Message-ID: <005601dae68b$41aab4c0$c5001e40$@gmail.com> > Content-Type: text/plain; charset="utf-8" > > Thank you again Todd and Roger for helping me plan this project. I will > take pictures and do a write up to consolidate all this advice into a > single document. > > Mike > > -----Original Message----- > From: Rhodes22-list <rhodes22-list-bounces at rhodes22.org> On Behalf Of > Todd Tavares > Sent: Saturday, August 3, 2024 11:16 PM > To: The Rhodes 22 Email List <rhodes22-list at rhodes22.org> > Subject: Re: [Rhodes22-list] How to replace forward lower chainplates? > > Roger, > > Eventually two pictures came through. There was also another link that > tried to download but stalled. > > I just wanted to stress to Michael that your way was far better than any > other...especially better than my way. > > When you wrote about cutting the chainplate off that protrudes above the > cabin roof, it was face palm moment. Why didn't I think of that. > > Todd T. > > On Sat, Aug 3, 2024, 10:05 PM ROGER PIHLAJA <roger_pihlaja at msn.com> wrote: > > > Todd, > > > > I sent the photos as a .pdf attachment. Doesn?t that work anymore? If > > you give me your email address, I?ll resend the photos to you. > > > > Roger Pihlaja > > S/V Dynamic Equilibrium > > 1978. Sanford, MI > > > > Sent from my iPhone > > > > > On Aug 3, 2024, at 7:22?PM, Todd Tavares <tavares0947 at gmail.com> > wrote: > > > > > > ?Mike, > > > > > > Roger has come up with the best way of repairing and or replacing the > > lower > > > shroud chainplates. > > > He posted pictures, but they did not come through on my end. By cutting > > the > > > chainplate off flush where it comes out through the cabin top, thus > > > removing most of the bend, you should be able to fish the piece out > > without > > > cutting down the side, or using the die grinder. > > > > > > You will however have to cut rectangular hole lower in the side to > > > reinforce the side outer cabin wall and mount the new chainplates. > > > > > > Todd T. > > > > > >> On Fri, Aug 2, 2024, 4:45 PM <mm.bizlist1 at gmail.com> wrote: > > >> > > >> Roger and Todd, > > >> > > >> Before I start cutting holes in my boat, I want to make sure I > > understand > > >> the full process, so please let me know if I am misunderstanding > > >> anything. > > >> > > >> The original chainplate is bent in an L-shape and screwed to plywood > > inside > > >> the ceiling of the cabin with one or two wood screws. To remove the > old > > >> chainplate, you need to open a hole in the ceiling liner. In Todd's > > case, > > >> he also needed to open some of adjacent sidewall of the cabin to gain > > >> sufficient clearance to extract the old chainplate. Roger, did you > > need to > > >> do that also, or did you use a different approach? > > >> > > >> In any event, the hole in the ceiling needs to be repaired afterwards. > > Was > > >> there much difficulty in achieving a clean repair of the ceiling > liner? > > >> > > >> A second hole of the correct size for the deckplate inspection port is > > >> drilled in the inside sidewall liner below the chainplate opening. A > > >> backing plate (1/4" plywood?) is epoxied inside of the outer layer of > > the > > >> cabin sidewall. The new chainplate is through-bolted to the backing > > plate. > > >> Finally, the deckplate is installed to the inside liner of the cabin > as > > an > > >> inspection port. > > >> > > >> Is the above description correct? > > >> > > >> Thanks, > > >> > > >> Mike > > >> > > >> -----Original Message----- > > >> From: Rhodes22-list <rhodes22-list-bounces at rhodes22.org> On Behalf Of > > >> ROGER > > >> PIHLAJA > > >> Sent: Friday, August 2, 2024 12:59 PM > > >> To: 'The Rhodes 22 Email List' <rhodes22-list at rhodes22.org> > > >> Subject: Re: [Rhodes22-list] How to replace forward lower chainplates? > > >> > > >> You use something like a hole saw to make a 4-1/2" ID hole in the > cabin > > >> liner. This will expose the plywood core and the old chainplate. > > Remove > > >> the old chainplate and any plywood that's in the way, install a new > > >> chainplate made of straight SS bar stock, (Note that this new > chainplate > > >> goes thru the original hole in the cabin roof) and thru bolt it thru > > the > > >> outer cabin wall. Then, install the Beckson inspection plate. Easy > > peasy, > > >> it takes about 30 minutes to do each chainplate. You can easily do > all > > 4 > > >> inner chainplates in an afternoon. Other than two round head machine > > >> screws > > >> + fender washers on the side of the cabin at each chain plate and 4 > > Beckson > > >> inspection plates in the cabin, the installation will look stock. > But, > > >> you > > >> will be able to inspect/repair/replace the 4 inner chainplates > whenever > > you > > >> want. > > >> > > >> Roger Pihlaja > > >> S/V Dynamic Equilibrium > > >> 1978 Sanford, MI > > >> > > >> Roger Pihlaja > > >> > > >> ________________________________ > > >> From: Rhodes22-list <rhodes22-list-bounces at rhodes22.org> on behalf of > > >> mm.bizlist1 at gmail.com <mm.bizlist1 at gmail.com> > > >> Sent: Friday, August 2, 2024 12:40 PM > > >> To: 'The Rhodes 22 Email List' <rhodes22-list at rhodes22.org> > > >> Subject: Re: [Rhodes22-list] How to replace forward lower chainplates? > > >> > > >> Roger, how did you remove the existing chainplates? Did you have to > > open > > >> up > > >> the cabin liner? > > >> > > >> -----Original Message----- > > >> From: Rhodes22-list <rhodes22-list-bounces at rhodes22.org> On Behalf Of > > >> ROGER > > >> PIHLAJA > > >> Sent: Tuesday, July 30, 2024 11:47 AM > > >> To: The Rhodes 22 Email List <rhodes22-list at rhodes22.org> > > >> Subject: Re: [Rhodes22-list] How to replace forward lower chainplates? > > >> > > >> Hi All, > > >> > > >> One of the first things I replaced when I bought my boat back in 1987 > > were > > >> the four lower chainplates. There is no way to inspect the factory > OEM > > >> lower chainplates. Sooner or later, water is going to infiltrate into > > the > > >> plywood core, causing it to rot. This is easily fixed by installing 4 > > >> Beckson 4-1/2" white screw-out deck plates (Beckson P/N: DP40-W, > > Defender > > >> Marine C/N: 941619, $17.36 each + S&H) thru the cabin liner. With > these > > >> inspection plates installed, you can thru bolt the lower chainplates > > thru > > >> the outer cabin wall and easily inspect them whenever you wish. I do > > not > > >> trust wood screws into the plywood core for this heavily loaded > > component, > > >> especially not when the fix is so easy. Just bite the bullet and do > > this > > >> upgrade. You'll never have to worry about it again. > > >> > > >> Roger Pihlaja > > >> S/V Dynamic Equilibrium > > >> 1978 Sanford, MI > > >> ________________________________ > > >> From: Rhodes22-list <rhodes22-list-bounces at rhodes22.org> on behalf of > > >> Graham > > >> Stewart <gstewart.gm at gmail.com> > > >> Sent: Tuesday, July 30, 2024 10:16 AM > > >> To: The Rhodes 22 Email List <rhodes22-list at rhodes22.org> > > >> Subject: Re: [Rhodes22-list] How to replace forward lower chainplates? > > >> > > >> The chain plate is a bent stainless-steel tang. Mine was held in place > > with > > >> a single screw into the plywood core of the cabin top. I have > attached a > > >> picture of the chainplate. Knowing the width, you should be able to > > >> calculate pretty accurately where the screw would be. Removing a > > section of > > >> the liner should allow you to remove the screw without needing to > > create a > > >> large hole. > > >> > > >> > > >> Graham Stewart > > >> Rhodes 22 > > >> Agile, 1976 > > >> ________________________________ > > >> From: Rhodes22-list <rhodes22-list-bounces at rhodes22.org> on behalf of > > >> Michael McKay <mm.bizlist1 at gmail.com> > > >> Sent: Sunday, July 28, 2024 4:59 PM > > >> To: rhodes22-list at rhodes22.org <rhodes22-list at rhodes22.org> > > >> Subject: [Rhodes22-list] How to replace forward lower chainplates? > > >> > > >> Hi Rhodies, > > >> > > >> I damaged one of my forward lower chainplates and need to replace it. > > >> > > >> It is evidently attached to something between the inner and outer > > >> fiberglass skins, so my plan would be to cut an access hole from the > > >> inside. > > >> > > >> Can you provide any guidance about how best to approach this project? > > >> > > >> Thank you! > > >> > > >> Mike McKay > > >> S/V Liber 2006/2108 > > >> Allatoona Lake, GA > > >> > > >> > > >> > > >> > > >> Michael McKay > > >> (630) 209-2054 (m) > > >> > > >> Sent from my iPhone > > >> -------------- next part -------------- > > >> A non-text attachment was scrubbed... > > >> Name: Chainplate.JPG > > >> Type: image/jpeg > > >> Size: 89771 bytes > > >> Desc: Chainplate.JPG > > >> URL: > > >> < > > >> http://rhodes22.or/ > > >> > > >> > > > %2F&data=05%7C02%7C%7Ca7967458efd14c4dfe5208dcb311e4b4%7C84df9e7fe9f640afb43 > > >> > > >> > > > 5aaaaaaaaaaaa%7C1%7C0%7C638582136698053942%7CUnknown%7CTWFpbGZsb3d8eyJWIjoiM > > >> <http://rhodes22.or/> > > >> > > >> > > > C4wLjAwMDAiLCJQIjoiV2luMzIiLCJBTiI6Ik1haWwiLCJXVCI6Mn0%3D%7C0%7C%7C%7C&sdata > > >> =HFyik%2FmRwx69hWRMx5DoANJs6BFU28nstLPKXS2SNCc%3D&reserved=0 > > >> > > >> > > > g%2Fpipermail%2Frhodes22-list%2Fattachments%2F20240730%2F05e2d6ca%2Fattachme > > >> > > >> > > > nt.jpe&data=05%7C02%7C%7C00aa48bcb418480360ad08dcb0a2310f%7C84df9e7fe9f640af > > >> > > >> > > > b435aaaaaaaaaaaa%7C1%7C0%7C638579458073076816%7CUnknown%7CTWFpbGZsb3d8eyJWIj > > >> > > >> > > > oiMC4wLjAwMDAiLCJQIjoiV2luMzIiLCJBTiI6Ik1haWwiLCJXVCI6Mn0%3D%7C0%7C%7C%7C&sd > > >> ata=%2FLnNro58IDe1WwpfkGbccN3v%2BccS0DNfMm%2BIOWMHbeg%3D&reserved=0< > > >> http://r > > >> > > >> > > > hodes22.org/pipermail/rhodes22-list/attachments/20240730/05e2d6ca/attachment > > >> .jpe>> > > >> > > >> > > >> > > > > > > ------------------------------ > > Message: 5 > Date: Sun, 4 Aug 2024 15:31:33 -0400 > From: Scott Andrews <sea20 at verizon.net> > To: The Rhodes 22 Email List <rhodes22-list at rhodes22.org> > Subject: Re: [Rhodes22-list] How to replace forward lower chainplates? > Message-ID: <2A3BAC3F-7EE8-434E-BA53-DC74CB663407 at verizon.net> > Content-Type: text/plain; charset=utf-8 > > Great information! I continue to be amazed by the wonderful sharing among > owners. Thanks to all. > Scott & Rebecca > Sent from my iPhone > > > On Aug 4, 2024, at 12:27?PM, mm.bizlist1 at gmail.com wrote: > > > > ?Thank you again Todd and Roger for helping me plan this project. I > will take pictures and do a write up to consolidate all this advice into a > single document. > > > > Mike > > > > -----Original Message----- > > From: Rhodes22-list <rhodes22-list-bounces at rhodes22.org> On Behalf Of > Todd Tavares > > Sent: Saturday, August 3, 2024 11:16 PM > > To: The Rhodes 22 Email List <rhodes22-list at rhodes22.org> > > Subject: Re: [Rhodes22-list] How to replace forward lower chainplates? > > > > Roger, > > > > Eventually two pictures came through. There was also another link that > > tried to download but stalled. > > > > I just wanted to stress to Michael that your way was far better than any > > other...especially better than my way. > > > > When you wrote about cutting the chainplate off that protrudes above the > > cabin roof, it was face palm moment. Why didn't I think of that. > > > > Todd T. > > > >> On Sat, Aug 3, 2024, 10:05 PM ROGER PIHLAJA <roger_pihlaja at msn.com> > wrote: > >> > >> Todd, > >> > >> I sent the photos as a .pdf attachment. Doesn?t that work anymore? If > >> you give me your email address, I?ll resend the photos to you. > >> > >> Roger Pihlaja > >> S/V Dynamic Equilibrium > >> 1978. Sanford, MI > >> > >> Sent from my iPhone > >> > >>>> On Aug 3, 2024, at 7:22?PM, Todd Tavares <tavares0947 at gmail.com> > wrote: > >>> > >>> ?Mike, > >>> > >>> Roger has come up with the best way of repairing and or replacing the > >> lower > >>> shroud chainplates. > >>> He posted pictures, but they did not come through on my end. By cutting > >> the > >>> chainplate off flush where it comes out through the cabin top, thus > >>> removing most of the bend, you should be able to fish the piece out > >> without > >>> cutting down the side, or using the die grinder. > >>> > >>> You will however have to cut rectangular hole lower in the side to > >>> reinforce the side outer cabin wall and mount the new chainplates. > >>> > >>> Todd T. > >>> > >>>> On Fri, Aug 2, 2024, 4:45 PM <mm.bizlist1 at gmail.com> wrote: > >>>> > >>>> Roger and Todd, > >>>> > >>>> Before I start cutting holes in my boat, I want to make sure I > >> understand > >>>> the full process, so please let me know if I am misunderstanding > >>>> anything. > >>>> > >>>> The original chainplate is bent in an L-shape and screwed to plywood > >> inside > >>>> the ceiling of the cabin with one or two wood screws. To remove the > old > >>>> chainplate, you need to open a hole in the ceiling liner. In Todd's > >> case, > >>>> he also needed to open some of adjacent sidewall of the cabin to gain > >>>> sufficient clearance to extract the old chainplate. Roger, did you > >> need to > >>>> do that also, or did you use a different approach? > >>>> > >>>> In any event, the hole in the ceiling needs to be repaired afterwards. > >> Was > >>>> there much difficulty in achieving a clean repair of the ceiling > liner? > >>>> > >>>> A second hole of the correct size for the deckplate inspection port is > >>>> drilled in the inside sidewall liner below the chainplate opening. A > >>>> backing plate (1/4" plywood?) is epoxied inside of the outer layer of > >> the > >>>> cabin sidewall. The new chainplate is through-bolted to the backing > >> plate. > >>>> Finally, the deckplate is installed to the inside liner of the cabin > as > >> an > >>>> inspection port. > >>>> > >>>> Is the above description correct? > >>>> > >>>> Thanks, > >>>> > >>>> Mike > >>>> > >>>> -----Original Message----- > >>>> From: Rhodes22-list <rhodes22-list-bounces at rhodes22.org> On Behalf Of > >>>> ROGER > >>>> PIHLAJA > >>>> Sent: Friday, August 2, 2024 12:59 PM > >>>> To: 'The Rhodes 22 Email List' <rhodes22-list at rhodes22.org> > >>>> Subject: Re: [Rhodes22-list] How to replace forward lower chainplates? > >>>> > >>>> You use something like a hole saw to make a 4-1/2" ID hole in the > cabin > >>>> liner. This will expose the plywood core and the old chainplate. > >> Remove > >>>> the old chainplate and any plywood that's in the way, install a new > >>>> chainplate made of straight SS bar stock, (Note that this new > chainplate > >>>> goes thru the original hole in the cabin roof) and thru bolt it thru > >> the > >>>> outer cabin wall. Then, install the Beckson inspection plate. Easy > >> peasy, > >>>> it takes about 30 minutes to do each chainplate. You can easily do > all > >> 4 > >>>> inner chainplates in an afternoon. Other than two round head machine > >>>> screws > >>>> + fender washers on the side of the cabin at each chain plate and 4 > >> Beckson > >>>> inspection plates in the cabin, the installation will look stock. > But, > >>>> you > >>>> will be able to inspect/repair/replace the 4 inner chainplates > whenever > >> you > >>>> want. > >>>> > >>>> Roger Pihlaja > >>>> S/V Dynamic Equilibrium > >>>> 1978 Sanford, MI > >>>> > >>>> Roger Pihlaja > >>>> > >>>> ________________________________ > >>>> From: Rhodes22-list <rhodes22-list-bounces at rhodes22.org> on behalf of > >>>> mm.bizlist1 at gmail.com <mm.bizlist1 at gmail.com> > >>>> Sent: Friday, August 2, 2024 12:40 PM > >>>> To: 'The Rhodes 22 Email List' <rhodes22-list at rhodes22.org> > >>>> Subject: Re: [Rhodes22-list] How to replace forward lower chainplates? > >>>> > >>>> Roger, how did you remove the existing chainplates? Did you have to > >> open > >>>> up > >>>> the cabin liner? > >>>> > >>>> -----Original Message----- > >>>> From: Rhodes22-list <rhodes22-list-bounces at rhodes22.org> On Behalf Of > >>>> ROGER > >>>> PIHLAJA > >>>> Sent: Tuesday, July 30, 2024 11:47 AM > >>>> To: The Rhodes 22 Email List <rhodes22-list at rhodes22.org> > >>>> Subject: Re: [Rhodes22-list] How to replace forward lower chainplates? > >>>> > >>>> Hi All, > >>>> > >>>> One of the first things I replaced when I bought my boat back in 1987 > >> were > >>>> the four lower chainplates. There is no way to inspect the factory > OEM > >>>> lower chainplates. Sooner or later, water is going to infiltrate into > >> the > >>>> plywood core, causing it to rot. This is easily fixed by installing 4 > >>>> Beckson 4-1/2" white screw-out deck plates (Beckson P/N: DP40-W, > >> Defender > >>>> Marine C/N: 941619, $17.36 each + S&H) thru the cabin liner. With > these > >>>> inspection plates installed, you can thru bolt the lower chainplates > >> thru > >>>> the outer cabin wall and easily inspect them whenever you wish. I do > >> not > >>>> trust wood screws into the plywood core for this heavily loaded > >> component, > >>>> especially not when the fix is so easy. Just bite the bullet and do > >> this > >>>> upgrade. You'll never have to worry about it again. > >>>> > >>>> Roger Pihlaja > >>>> S/V Dynamic Equilibrium > >>>> 1978 Sanford, MI > >>>> ________________________________ > >>>> From: Rhodes22-list <rhodes22-list-bounces at rhodes22.org> on behalf of > >>>> Graham > >>>> Stewart <gstewart.gm at gmail.com> > >>>> Sent: Tuesday, July 30, 2024 10:16 AM > >>>> To: The Rhodes 22 Email List <rhodes22-list at rhodes22.org> > >>>> Subject: Re: [Rhodes22-list] How to replace forward lower chainplates? > >>>> > >>>> The chain plate is a bent stainless-steel tang. Mine was held in place > >> with > >>>> a single screw into the plywood core of the cabin top. I have > attached a > >>>> picture of the chainplate. Knowing the width, you should be able to > >>>> calculate pretty accurately where the screw would be. Removing a > >> section of > >>>> the liner should allow you to remove the screw without needing to > >> create a > >>>> large hole. > >>>> > >>>> > >>>> Graham Stewart > >>>> Rhodes 22 > >>>> Agile, 1976 > >>>> ________________________________ > >>>> From: Rhodes22-list <rhodes22-list-bounces at rhodes22.org> on behalf of > >>>> Michael McKay <mm.bizlist1 at gmail.com> > >>>> Sent: Sunday, July 28, 2024 4:59 PM > >>>> To: rhodes22-list at rhodes22.org <rhodes22-list at rhodes22.org> > >>>> Subject: [Rhodes22-list] How to replace forward lower chainplates? > >>>> > >>>> Hi Rhodies, > >>>> > >>>> I damaged one of my forward lower chainplates and need to replace it. > >>>> > >>>> It is evidently attached to something between the inner and outer > >>>> fiberglass skins, so my plan would be to cut an access hole from the > >>>> inside. > >>>> > >>>> Can you provide any guidance about how best to approach this project? > >>>> > >>>> Thank you! > >>>> > >>>> Mike McKay > >>>> S/V Liber 2006/2108 > >>>> Allatoona Lake, GA > >>>> > >>>> > >>>> > >>>> > >>>> Michael McKay > >>>> (630) 209-2054 (m) > >>>> > >>>> Sent from my iPhone > >>>> -------------- next part -------------- > >>>> A non-text attachment was scrubbed... > >>>> Name: Chainplate.JPG > >>>> Type: image/jpeg > >>>> Size: 89771 bytes > >>>> Desc: Chainplate.JPG > >>>> URL: > >>>> < > >>>> http://rhodes22.or/ > >>>> > >>>> > >> > %2F&data=05%7C02%7C%7Ca7967458efd14c4dfe5208dcb311e4b4%7C84df9e7fe9f640afb43 > >>>> > >>>> > >> > 5aaaaaaaaaaaa%7C1%7C0%7C638582136698053942%7CUnknown%7CTWFpbGZsb3d8eyJWIjoiM > >>>> <http://rhodes22.or/> > >>>> > >>>> > >> > C4wLjAwMDAiLCJQIjoiV2luMzIiLCJBTiI6Ik1haWwiLCJXVCI6Mn0%3D%7C0%7C%7C%7C&sdata > >>>> =HFyik%2FmRwx69hWRMx5DoANJs6BFU28nstLPKXS2SNCc%3D&reserved=0 > >>>> > >>>> > >> > g%2Fpipermail%2Frhodes22-list%2Fattachments%2F20240730%2F05e2d6ca%2Fattachme > >>>> > >>>> > >> > nt.jpe&data=05%7C02%7C%7C00aa48bcb418480360ad08dcb0a2310f%7C84df9e7fe9f640af > >>>> > >>>> > >> > b435aaaaaaaaaaaa%7C1%7C0%7C638579458073076816%7CUnknown%7CTWFpbGZsb3d8eyJWIj > >>>> > >>>> > >> > oiMC4wLjAwMDAiLCJQIjoiV2luMzIiLCJBTiI6Ik1haWwiLCJXVCI6Mn0%3D%7C0%7C%7C%7C&sd > >>>> ata=%2FLnNro58IDe1WwpfkGbccN3v%2BccS0DNfMm%2BIOWMHbeg%3D&reserved=0< > >>>> http://r > >>>> > >>>> > >> > hodes22.org/pipermail/rhodes22-list/attachments/20240730/05e2d6ca/attachment > >>>> .jpe>> > >>>> > >>>> > >>>> > >> > > > > > > ------------------------------ > > Message: 6 > Date: Mon, 5 Aug 2024 19:12:00 -0400 > From: Chris Geankoplis <chrisgeankoplis at gmail.com> > To: The Rhodes 22 Email List <rhodes22-list at rhodes22.org> > Subject: Re: [Rhodes22-list] head ventilation (Rhodes22-list Digest, > Vol 4576), Issue 1 > Message-ID: > < > CADNTwiWDCm44Kd8LgKCe+kFvKAzzRuiqMhGj15_xSE4jPTL12A at mail.gmail.com> > Content-Type: text/plain; charset="utf-8" > > Got it Peter! I saw the installation, very neat. > > On Sun, Aug 4, 2024 at 1:40?AM peter klappert <koatimundi100 at gmail.com> > wrote: > > > I sent this at the end of July but haven?t seen it. In case I screwed up > > when sending (I frequently screw up things digital), here it is again . > > > > On Tue, Jul 30, 2024 at 4:25?PM peter klappert <koatimundi100 at gmail.com> > > wrote: > > > > > > > > I was the first?possibly the only?Rhodie who substituted an Airhead > > > composting head for the marine toilet and holding tank. (My R22 is kept > > on > > > a lift at my dock: I didn?t want to have to find a pump out station.) > It > > > has a vent tube with a small computer fan, tho I doubt that affords > much > > > head ventilation. > > > But I also had Stan install a solar fan (rechargeable batteries) > in > > > the deck over the v-berth, way up in the bow. It pushes a great deal of > > air > > > through the whole cabin. With the sliding panel between the v-berth and > > > head pushed open (ie to port) it keeps the head well-ventilated and > > > > > indeed, it ventilates the whole cabin). > > > > > > > > > > > > > > > > > > > > > *>>>>>>>>> *[image: Sailboat on Messenger]*<<<<<<<<<* > > > > > > *Peter Klappert5012 Bay State Road Palmetto, FL 34221* > > > > > > > > > > > > > > > > > > On Tue, Jul 30, 2024 at 2:58?PM <rhodes22-list-request at rhodes22.org> > > > wrote: > > > > > >> Send Rhodes22-list mailing list submissions to > > >> rhodes22-list at rhodes22.org > > >> > > >> To subscribe or unsubscribe via the World Wide Web, visit > > >> http://rhodes22.org/mailman/listinfo/rhodes22-list > > >> or, via email, send a message with subject or body 'help' to > > >> rhodes22-list-request at rhodes22.org > > >> > > >> You can reach the person managing the list at > > >> rhodes22-list-owner at rhodes22.org > > >> > > >> When replying, please edit your Subject line so it is more specific > > >> than "Re: Contents of Rhodes22-list digest..." > > >> > > >> > > >> Today's Topics: > > >> > > >> 1. Re: Head ventilation (Scott Andrews) > > >> 2. Re: Head ventilation (ROGER PIHLAJA) > > >> 3. Re: Boom Rigging Question (Michael McKay) > > >> 4. Re: Head ventilation (Scott Andrews) > > >> 5. Re: Boom Rigging Question (PBR) > > >> 6. Re: Boom Rigging Question (Mike) > > >> 7. Re: Head ventilation (Mary Lou Troy) > > >> 8. Fwd: A Conversation with Stan Spitzer (Michael McKay) > > >> 9. Re: Boom Rigging Question (Todd Tavares) > > >> 10. Re: How to replace forward lower chainplates? (Graham Stewart) > > >> 11. Re: How to replace forward lower chainplates? (ROGER PIHLAJA) > > >> 12. Re: A Conversation with Stan Spitzer (Frank Goldsmith) > > >> > > >> > > >> ---------------------------------------------------------------------- > > >> > > >> Message: 1 > > >> Date: Sun, 28 Jul 2024 18:05:22 -0400 > > >> From: Scott Andrews <sea20 at verizon.net> > > >> To: The Rhodes 22 Email List <rhodes22-list at rhodes22.org> > > >> Subject: Re: [Rhodes22-list] Head ventilation > > >> Message-ID: <216AD1F0-4896-4812-9618-48135BA84B45 at verizon.net> > > >> Content-Type: text/plain; charset="utf-8" > > >> > > >> Here?s my friend Don?s hatches > > >> -------------- next part -------------- > > >> A non-text attachment was scrubbed... > > >> Name: image0.jpeg > > >> Type: image/jpeg > > >> Size: 110591 bytes > > >> Desc: not available > > >> URL: < > > >> > > > http://rhodes22.org/pipermail/rhodes22-list/attachments/20240728/9b752101/attachment.jpeg > > >> > > > >> -------------- next part -------------- > > >> > > >> Sent from my iPhone > > >> > > >> > On Jul 28, 2024, at 10:56?AM, Kenwood _ <kenwood364 at gmail.com> > wrote: > > >> > > > >> > ?Stand up head sounds nice! I lowered my head floor by 1" when I > > >> rebuilt the > > >> > interior but I didn't go as low as silver heels cuz I have multiple > > >> bilge > > >> > pumps. More headroom would be nice > > >> > > > >> >> On Sat, Jul 27, 2024, 10:00?PM Michael D. Weisner < > > Mweisner at ebsmed.com > > >> > > > >> >> wrote: > > >> >> > > >> >> It's known as a "stand up head" for just that reason. > > >> >> > > >> >> Mike > > >> >> s/v Wind Lass ('91) > > >> >> Nissequogue River, NY > > >> >> > > >> >> > > >> >> > > >> >>> On Sat, July 27, 2024 9:32 pm, Kenwood _ wrote: > > >> >>> Hey all! As I'm starting to attack the quality of life mods that I > > >> want > > >> >> to > > >> >>> do in my boat I'm noticing that your more modern boats have some > > stuff > > >> >> I'm > > >> >>> really jealous of! > > >> >>> > > >> >>> I'm looking at a lot of ventilation options for the head but > they're > > >> all > > >> >>> kind of undersized or made for RVs. The new boats seem to have a > > hatch > > >> >>> over > > >> >>> the head! That's really awesome, but I can't seem to find hatches > > that > > >> >> are > > >> >>> that small it's not a very large space to put in a hatch and I'm > > >> worried > > >> >>> about cutting away too much of the roof. > > >> >>> > > >> >>> Does anybody have hatch dimensions or perhaps know where they can > be > > >> >>> sourced? A hatch that could be opened Right above the head would > be > > >> >> better > > >> >>> than any RV fan ventilator I can think of and it might even give > you > > >> some > > >> >>> headroom! Thanks! > > >> >>> > > >> >> > > >> >> > > >> >> > > >> > > >> ------------------------------ > > >> > > >> Message: 2 > > >> Date: Sun, 28 Jul 2024 22:23:10 +0000 > > >> From: ROGER PIHLAJA <roger_pihlaja at msn.com> > > >> To: Scott Andrews <sea20 at verizon.net>, The Rhodes 22 Email List > > >> <rhodes22-list at rhodes22.org> > > >> Subject: Re: [Rhodes22-list] Head ventilation > > >> Message-ID: > > >> < > > >> > > > MN2PR10MB42886A2EAACCF5F9D2A2AC1C80B62 at MN2PR10MB4288.namprd10.prod.outlook.com > > >> > > > >> > > >> Content-Type: text/plain; charset="utf-8" > > >> > > >> Hi All, > > >> > > >> Unfortunately, we don?t have Stan available anymore to ask. I would > > like > > >> to ask him if he did anything to reinforce the cabin roof when GBI > > >> implemented those 2 opening hatches. Those 2 hatches together > > represent a > > >> lot of cabin roof structure removed around the area loaded by the > mast. > > >> Was the cabin roof so over designed initially; that, 2 big holes can > be > > cut > > >> into it without compromising the structure? If Stan had to reinforce > > the > > >> cabin roof with something like C fiber; then, he never mentioned it in > > any > > >> advertisement that I saw. I wish there was someone to ask re this > issue > > >> because my ?calibrated engineer?s eye? says ?too weak?. Scott, I > advise > > >> you to proceed cautiously, because the cabin roof would be hard to fix > > if > > >> you weaken it too much. > > >> > > >> Roger Pihlaja > > >> S/V Dynamic Equilibrium > > >> 1978. Sanford, MI > > >> > > >> Sent from my iPhone > > >> > > >> > On Jul 28, 2024, at 6:05?PM, Scott Andrews via Rhodes22-list < > > >> rhodes22-list at rhodes22.org> wrote: > > >> > > > >> > ?Here?s my friend Don?s hatches > > >> > -------------- next part -------------- > > >> > A non-text attachment was scrubbed... > > >> > Name: image0.jpeg > > >> > Type: image/jpeg > > >> > Size: 110591 bytes > > >> > Desc: not available > > >> > URL: < > > >> > > > http://rhodes22.org/pipermail/rhodes22-list/attachments/20240728/9b752101/attachment.jpeg > > >> > > > >> > -------------- next part -------------- > > >> > > > >> > Sent from my iPhone > > >> > > > >> >> On Jul 28, 2024, at 10:56?AM, Kenwood _ <kenwood364 at gmail.com> > > wrote: > > >> >> > > >> >> ?Stand up head sounds nice! I lowered my head floor by 1" when I > > >> rebuilt the > > >> >> interior but I didn't go as low as silver heels cuz I have multiple > > >> bilge > > >> >> pumps. More headroom would be nice > > >> >> > > >> >>> On Sat, Jul 27, 2024, 10:00?PM Michael D. Weisner < > > >> Mweisner at ebsmed.com> > > >> >>> wrote: > > >> >>> > > >> >>> It's known as a "stand up head" for just that reason. > > >> >>> > > >> >>> Mike > > >> >>> s/v Wind Lass ('91) > > >> >>> Nissequogue River, NY > > >> >>> > > >> >>> > > >> >>> > > >> >>>>> On Sat, July 27, 2024 9:32 pm, Kenwood _ wrote: > > >> >>>>> Hey all! As I'm starting to attack the quality of life mods > that I > > >> want > > >> >>> to > > >> >>>> do in my boat I'm noticing that your more modern boats have some > > >> stuff > > >> >>> I'm > > >> >>>> really jealous of! > > >> >>>> > > >> >>>> I'm looking at a lot of ventilation options for the head but > > they're > > >> all > > >> >>>> kind of undersized or made for RVs. The new boats seem to have a > > >> hatch > > >> >>>> over > > >> >>>> the head! That's really awesome, but I can't seem to find hatches > > >> that > > >> >>> are > > >> >>>> that small it's not a very large space to put in a hatch and I'm > > >> worried > > >> >>>> about cutting away too much of the roof. > > >> >>>> > > >> >>>> Does anybody have hatch dimensions or perhaps know where they can > > be > > >> >>>> sourced? A hatch that could be opened Right above the head would > be > > >> >>> better > > >> >>>> than any RV fan ventilator I can think of and it might even give > > you > > >> some > > >> >>>> headroom! Thanks! > > >> >>>> > > >> >>> > > >> >>> > > >> >>> > > >> > > >> ------------------------------ > > >> > > >> Message: 3 > > >> Date: Sun, 28 Jul 2024 23:11:15 -0400 > > >> From: Michael McKay <mm.bizlist1 at gmail.com> > > >> To: The Rhodes 22 Email List <rhodes22-list at rhodes22.org> > > >> Subject: Re: [Rhodes22-list] Boom Rigging Question > > >> Message-ID: <3E65320C-991D-4057-B001-D79B5C544C06 at gmail.com> > > >> Content-Type: text/plain; charset=utf-8 > > >> > > >> Mike, on my boat the topping lift runs down outside the mast to a > block > > >> on the port cabin top near the hand rail and then back through a cam > > cleat > > >> at the cockpit, similar to the jib furling line. > > >> > > >> > > >> Michael McKay > > >> > > >> Sent from my iPhone > > >> > > >> > On Jul 28, 2024, at 7:35?PM, ROGER PIHLAJA <roger_pihlaja at msn.com> > > >> wrote: > > >> > > > >> > ?Mike, > > >> > > > >> > I?ve never understood why Stan made the boom topping lift so > complex. > > >> On my Rhodes 22, I just attached a 1/4? piece of double braid to the > > >> masthead. I ran this line directly to the end of the boom and > attached > > it > > >> to a cam cleat mounted on the end of the boom. Now, if you want to > > adjust > > >> the topping lift, it?s located right above the helmsman?s head. This > > is at > > >> least as convenient and ergonomic as the GBI setup and it?s lighter > with > > >> less windage too. Think about it before you go to a lot of trouble > and > > >> effort to rebuild the factory setup. > > >> > > > >> > Roger Pihlaja > > >> > S/V Dynamic Equilibrium > > >> > 1978. Sanford, MI > > >> > > > >> > Sent from my iPhone > > >> > > > >> >> On Jul 28, 2024, at 4:30?PM, Mike via Rhodes22-list < > > >> rhodes22-list at rhodes22.org> wrote: > > >> >> > > >> >> ?Hello everyone! > > >> >> > > >> >> My name is Mike and I've had my Rhodes 22 for almost 9 years now. > > >> Unfortunately, circumstances kept it in storage for almost of all of > > that > > >> time. > > >> >> I was finally able to get it out this Summer after the last, > two-year > > >> delay waiting for sails, then having to replace the headsail furler, > and > > >> then having to have the sails redone (long story, not the point). > > >> >> I've figured most of the rigging out, with the exception of the > boom > > >> lift. I read the previous comments, but the way mine is done doesn't > > make > > >> any sense. > > >> >> I don't know if the shop messed something up (probably) or if it's > > >> just rigged weird. There's a lot of peculiarities with this boat > > because it > > >> was Stan's rental until I bought it in 2015. > > >> >> Many of you have probably sailed on it before buying your Rhodes. > > It's > > >> an older Rhodes with some modern additions and kind of a one-off. > > >> >> The line from the end of the boom runs up through the sheaves at > the > > >> top of the mast and back down the outside of it, as described in the > > >> manual. However, the line then goes through the boom-carriage into the > > IMF > > >> rotating shaft. > > >> >> I am attaching a poorly-drawn representation so that you can > > visualize > > >> it. > > >> >> Furling and unfurling the mainsail, if I remember correctly and > it's > > >> been a long time, used to be accomplished with the blue and black > lines > > on > > >> the bottom of the boom. > > >> >> At some point, part of the boom-carriage broke (hoping that I can > > >> still order parts?) and so the front, black line goes to nothing and > is > > >> routed thru nothing, currently... which complicates trying to figure > > things > > >> out. > > >> >> Routing that line through the IMF shaft and to the carriage would > > make > > >> sense, but the line seems a bit short and space seems tight. > "Seems..." > > >> >> Any help would be much appreciated. > > >> >> > > >> >> Mike Blagg > > >> >> -------------- next part -------------- > > >> >> A non-text attachment was scrubbed... > > >> >> Name: sail rigging.jpg > > >> >> Type: image/jpeg > > >> >> Size: 69185 bytes > > >> >> Desc: not available > > >> >> URL: < > > >> > > > http://rhodes22.org/pipermail/rhodes22-list/attachments/20240728/af2109cf/attachment.jpg > > >> > > > >> > > >> > > >> ------------------------------ > > >> > > >> Message: 4 > > >> Date: Mon, 29 Jul 2024 07:21:20 -0400 > > >> From: Scott Andrews <sea20 at verizon.net> > > >> To: ROGER PIHLAJA <roger_pihlaja at msn.com> > > >> Cc: The Rhodes 22 Email List <rhodes22-list at rhodes22.org> > > >> Subject: Re: [Rhodes22-list] Head ventilation > > >> Message-ID: <8602DCF2-A4C3-4B30-AAD8-21C7857737E0 at verizon.net> > > >> Content-Type: text/plain; charset=utf-8 > > >> > > >> Greetings all, Roger is quite right about the load on the cabin and a > > >> compression post had to be added to the boat pictured with the > hatches. > > >> Scott A. > > >> Sent from my iPhone > > >> > > >> > On Jul 28, 2024, at 6:23?PM, ROGER PIHLAJA <roger_pihlaja at msn.com> > > >> wrote: > > >> > > > >> > ?Hi All, > > >> > > > >> > Unfortunately, we don?t have Stan available anymore to ask. I would > > >> like to ask him if he did anything to reinforce the cabin roof when > GBI > > >> implemented those 2 opening hatches. Those 2 hatches together > > represent a > > >> lot of cabin roof structure removed around the area loaded by the > mast. > > >> Was the cabin roof so over designed initially; that, 2 big holes can > be > > cut > > >> into it without compromising the structure? If Stan had to reinforce > > the > > >> cabin roof with something like C fiber; then, he never mentioned it in > > any > > >> advertisement that I saw. I wish there was someone to ask re this > issue > > >> because my ?calibrated engineer?s eye? says ?too weak?. Scott, I > advise > > >> you to proceed cautiously, because the cabin roof would be hard to fix > > if > > >> you weaken it too much. > > >> > > > >> > Roger Pihlaja > > >> > S/V Dynamic Equilibrium > > >> > 1978. Sanford, MI > > >> > > > >> > Sent from my iPhone > > >> > > > >> >> On Jul 28, 2024, at 6:05?PM, Scott Andrews via Rhodes22-list < > > >> rhodes22-list at rhodes22.org> wrote: > > >> >> > > >> >> ?Here?s my friend Don?s hatches > > >> >> -------------- next part -------------- > > >> >> A non-text attachment was scrubbed... > > >> >> Name: image0.jpeg > > >> >> Type: image/jpeg > > >> >> Size: 110591 bytes > > >> >> Desc: not available > > >> >> URL: < > > >> > > > http://rhodes22.org/pipermail/rhodes22-list/attachments/20240728/9b752101/attachment.jpeg > > >> > > > >> >> -------------- next part -------------- > > >> >> > > >> >> Sent from my iPhone > > >> >> > > >> >>>> On Jul 28, 2024, at 10:56?AM, Kenwood _ <kenwood364 at gmail.com> > > >> wrote: > > >> >>> > > >> >>> ?Stand up head sounds nice! I lowered my head floor by 1" when I > > >> rebuilt the > > >> >>> interior but I didn't go as low as silver heels cuz I have > multiple > > >> bilge > > >> >>> pumps. More headroom would be nice > > >> >>> > > >> >>>> On Sat, Jul 27, 2024, 10:00?PM Michael D. Weisner < > > >> Mweisner at ebsmed.com> > > >> >>>> wrote: > > >> >>>> > > >> >>>> It's known as a "stand up head" for just that reason. > > >> >>>> > > >> >>>> Mike > > >> >>>> s/v Wind Lass ('91) > > >> >>>> Nissequogue River, NY > > >> >>>> > > >> >>>> > > >> >>>> > > >> >>>>>> On Sat, July 27, 2024 9:32 pm, Kenwood _ wrote: > > >> >>>>>> Hey all! As I'm starting to attack the quality of life mods > that > > I > > >> want > > >> >>>> to > > >> >>>>> do in my boat I'm noticing that your more modern boats have some > > >> stuff > > >> >>>> I'm > > >> >>>>> really jealous of! > > >> >>>>> > > >> >>>>> I'm looking at a lot of ventilation options for the head but > > >> they're all > > >> >>>>> kind of undersized or made for RVs. The new boats seem to have a > > >> hatch > > >> >>>>> over > > >> >>>>> the head! That's really awesome, but I can't seem to find > hatches > > >> that > > >> >>>> are > > >> >>>>> that small it's not a very large space to put in a hatch and I'm > > >> worried > > >> >>>>> about cutting away too much of the roof. > > >> >>>>> > > >> >>>>> Does anybody have hatch dimensions or perhaps know where they > can > > be > > >> >>>>> sourced? A hatch that could be opened Right above the head would > > be > > >> >>>> better > > >> >>>>> than any RV fan ventilator I can think of and it might even give > > >> you so
To use your email application to send a messsage to the webmaster rather than this form, .
Your post is being sent... 