2024-10-23; 15:39:43 EDT
Member Since
2024-09-17
Posts: 9
Thanks for all the replies. My Rhodes 22 is a 1990 model. The trailer is a 2008 Triad Trailer. Wheel bearings. I'm a retired automotive mechanic and “name brand” bearings/races usually have a number etched on them. I could just barely make out “China” on these, no numbers. I went to Bearing Service, a local business that specializes in bearings & races and seals. These are the Timken numbers for the bearings. Outer wheel bearing 15123 race 15245 1 ¼” shaft Inner wheel bearing 25580 race 25520 1 ¾” shaft Seal 22558 The chrome stub on the starboard side I think might be for a grill. There is no matching stub on the port side. I have a bimini and it doesn’t attach to this part. “Hat shaped brackets” at both sides of the rear of the trailer, I don’t think they are for jacking the trailer or are a point to attach a mast raising device. On the left side forward of this bracket is a jack. This keeps the boat from tipping backwards when entering the boat. I have a 2” diameter 5 foot long pole with a winch on one end that came with the boat. Looks like it attaches to the bow for raising the mast. The tag on the axle says: “Tie Down Engineering Max Cap 5,200". I guess that means the axle is rated to carry 5,200 lbs. I live in Howell MI, about an hour/60 miles west of Lake St. Clair and Detroit Michigan. For local sailing I will sail on Lake St. Clair, Detroit River, and Lake Erie. For longer destinations I will trailer it to the Canadian North Channel, the area north of Manitoulin Island Canada. Larry Willis Serenity Howell, MI. chrome stud starboard side.jpg jack & hat section left side of trailer.jpgSee the original archive post