#1 you'd likely regret.
#2 won't work with genoa
#3 could work if made securely stable when in upright position. Creative!

Cindy Spitzer
443-980-7367

On Mon, May 19, 2025, 7:24 AM John Farmer <johnfarmer87 at gmail.com> wrote:

> Hello Rhodies,
>
> My town marina has a strict 22-foot maximum length rule, measured from the
> aft-most D-rings on the transom to the furthest point at the bow. From what
> I understand, the Rhodes 22's bow pulpit adds about 9–12 inches, which
> could put me over the limit. I’m exploring ways to reduce the boat’s
> effective length when stored at the marina and would really appreciate any
> feedback or suggestions on the following ideas:
>
> 1. *Remove the bow pulpit entirely* – Would I regret not having it?
>
> 2. *Reposition the pulpit* – Mount it further aft so that the front edge
> aligns with the bow. Not sure if there’s enough clearance for the jib, or
> if this is structurally feasible.
>
> 3. *Make it retractable* – Add hinges to the rear supports and a
> detachable, lockable pin or bracket for the front. Swing it back when
> docked to reduce length.
>
> Open to any other creative solutions as well.
>
> Thanks,
> John
>
> --
> John Farmer
> 505-400-1574
>