The Rhodes 22 Discussion Group R22 Discussion Group

The Rhodes 22 Discussion Group


< prior

Back to Month

Go to Thread

Member Picture

Patrick Riley



Trailer winch

2026-11-19; 13:35:12 EST

Member Since

2009-03-03

Posts: 143

Sounds like we all have similar issues.

Back to the ? about the winch slipping. I have not seen that .  All my winches (except on for mast raising) have mechanical gears that are visible.  One has a missing tooth and it does skip at that point.  You might have a case of a really loose wound strap that might appear to slip when it tightens up.  Or, maybe should unwind it all the way and make sure the "bitter end" is still attached to the winch wheel.

On moving the boat forward.  I have steep ramps that exacerbate the problem.  I have considered moving the axle or the winch post.  Before I do that I might try some nylon or plastic "boat glides" just screwed over top of my outdoor carpet (very not slick)  covering on the bunks to reduce friction and allow more forward winching.  Also, my bunks are not contacting the boat full length and having most of the contact near the ends might cause more friction, IDK.  I intend to adjust those next time I have the boat off the trailer for any length of time.

Patrick


See the original archive post
×

Message to Webmaster:

To use your email application to send a messsage to the webmaster rather than this form, .



×

Post to the Rhodes 22 Email List:



×

Sending Post:

Your post is being sent... waiting