The Rhodes 22 Discussion Group R22 Discussion Group

The Rhodes 22 Discussion Group


< prior

Back to Month

Go to Thread

Member Picture

cjlowe at sssnet.com



Clevis pins

2013-10-26; 23:36:48 EDT

Member Since

2008-02-18

Posts: 319

The 6 side shrouds are 1/4" pins. The fore and backstays use a 3/16"
pin.At least,on my 86', that is the way it is set up. It looks like the
chain plates will accept at least a 5/16" pin and maybe a 3/8" pin. I
don't know the nautical terms for what comes next,but I will try to
describe . If you want to use the pins in the link you provided, you might
be able to replace the bottom half of the turnbuckle to accept a 5/16"
pin. West marine doesn't show anything like that, you might want to check
with a rigger. This would only work on the side shrouds, as the fore and
backstay clevis are swedged on.

Jerry   Country Rhodes


See the original archive post
×

Message to Webmaster:

To use your email application to send a messsage to the webmaster rather than this form, .



×

Post to the Rhodes 22 Email List:



×

Sending Post:

Your post is being sent... waiting