The Rhodes 22 Discussion Group R22 Discussion Group

The Rhodes 22 Discussion Group


< prior

Back to Month

Go to Thread

Member Picture

Chris Geankoplis



Hail the explorer!

2013-11-17; 20:39:19 EST

Member Since

2004-04-05

Posts: 2062

Hey Joe,
	Chris Geankoplis here (35 year veteran of R22's).  I would caution
against it only because the compound curve of the gunnels hull and seat make
the boat incredibly strong.  If you still wanted to do it, where the
cubbyholes are now but with a panel so as to retain the comfort of the back
rest, try to not make it too large.  You might be tempted to make one of the
screw hatch access plates on the gunnels (thought of that myself) but that
would do the most to undermine the integrity of the boat.  One thought is if
the place is not occupied by your electrics would be to cut out an access
port (door or screw plate) from inside the boat on the port side looking aft
at the bulkhead that separates the cabin from the cockpit.  If you enclosed
the space with a bottom and back (aft), properly sealed it would be weather
tight. It would not compromise the strength of the boat that way.  Just my 2
cents worth.

Chris Geankoplis

See the original archive post
×

Message to Webmaster:

To use your email application to send a messsage to the webmaster rather than this form, .



×

Post to the Rhodes 22 Email List:



×

Sending Post:

Your post is being sent... waiting