The Rhodes 22 Discussion Group R22 Discussion Group

The Rhodes 22 Discussion Group


< prior

Back to Month

Go to Thread

Member Picture

John Shulick



Centerboard replacement.

2013-12-14; 13:33:40 EST

Member Since

2008-05-11

Posts: 393

James,

 When I rebuilt my centerboard trunk I cut the top off the trunk with a
sawzall. Then I could remove the board from the inside with the boat still
on the trailer. Make the cut at a 45* angle so it can be epoxied back
together more easily. I cut the top in 3 sections: the long low portion, the
slope and the the small part at the top where the block assembly was placed.
after assembly I put a sheet of fiberglass over the whole thing for
strength. Over the last 5 yrs. this has worked. I have a minimal seepage
problem approx 1/2 gal over a weekend. When no one is in the boat during the
week the reduction in weight aboard stops the leak and when you arrive on a
Friday the bilge is dry.

Best 

John S




--
View this message in context: http://rhodes-22.1065344.n5.nabble.com/Centerboard-replacement-tp47311p47319.html
Sent from the Rhodes 22 mailing list archive at Nabble.com.
See the original archive post
×

Message to Webmaster:

To use your email application to send a messsage to the webmaster rather than this form, .



×

Post to the Rhodes 22 Email List:



×

Sending Post:

Your post is being sent... waiting