The Rhodes 22 Discussion Group R22 Discussion Group

The Rhodes 22 Discussion Group


< prior

Back to Month

Go to Thread

Member Picture

Lou Rosenberg



Centerboard replacement.

2013-12-20; 13:24:08 EST

Member Since

2003-10-12

Posts: 163

James,

I renovated my '81 centerboard trunk and mechanism.  While its a totally
different design than what you have in front of you, I recommend trying to
re create what Stan had in that era of R22s.   Try to create a two piece 
(cap and flange ) system with a recessed "V" inside your trunk to hold the
pivot pin.
If for some reason you have no access to pics of this, I can supply some
directly to you.

I have documented my renovation in the Owner's site in the section under
technical details I believe.
Roger Pihlaja did most of the writing on the structural details of the
cement and glass work. I followed his online instructions and did the job
alone. I took one year of hard labor but it was worth it.  Since then I ve
re lined my centerboard cap and flange with Garolite (1/4") to make a firm
seal.  I have not had any issues since but am very curious to know how far
you took your restoration of the hull.

I plan to add stringers under my cockpit and remove the fwd foam to also
strengthen the glass from inside my boat.  I had a major issue with boat pox
which resulted in small hull leaks.

Good luck with your endeavor.

Lou Rosenberg
s/v Miracles 
Mill Basin Bklyn NY



--
View this message in context: http://rhodes-22.1065344.n5.nabble.com/Centerboard-replacement-tp47311p47330.html
Sent from the Rhodes 22 mailing list archive at Nabble.com.
See the original archive post
×

Message to Webmaster:

To use your email application to send a messsage to the webmaster rather than this form, .



×

Post to the Rhodes 22 Email List:



×

Sending Post:

Your post is being sent... waiting