The Rhodes 22 Discussion Group R22 Discussion Group

The Rhodes 22 Discussion Group


< prior

Back to Month

Go to Thread

Member Picture

Graham Stewart



Hull strengthening

2013-12-21; 11:36:06 EST

Member Since

2005-04-29

Posts: 816

James:

Interesting. I am wondering whether 240 lbs of flotation would be adequate
given the weight of the boat - I have no idea what the weight would be when
submerged to the gunnels. I have not been able to see under the cockpit to
judge how much flotation there is there but I assume it cannot be very much.
If the original flotation is adequate to keep the boat from sinking
presumably if you replace the flotation with an equivalent volume of new
flotation, that should be adequate. I do think, however, that white bead
flotation would be questionable and I wonder whether what you found was
actually the work of a previous owner. I would want closed-cell flotation as
the white bead stuff can become waterlogged and if that were to occur, for
whatever reason,  would need to be replaced- or worse. I think that
high-density foam is closed-cell or close enough but I would want to check
that out. Is it the same as the pink flotation blocks that Home Depot sells?
If not, you might be better to cut up the flotation blocks to fill the space
or use foam-in-place.

I just found the following excellent article on the subject on the Glen-L
site that takes much of my guess work out f this discussion:
http://www.glen-l.com/weblettr/webletters-7/wl55-flotation.html 

Graham 


See the original archive post
×

Message to Webmaster:

To use your email application to send a messsage to the webmaster rather than this form, .



×

Post to the Rhodes 22 Email List:



×

Sending Post:

Your post is being sent... waiting