2014-01-12; 10:36:50 EST
Member Since
2005-04-29
Posts: 816
I have been caught in wind and sea conditions that were too much for the Rhodes to make any headway but that did not result in any gelcoat cracks - and shouldn't. I have no idea why the cracks would appear but suspect that the real cause is in the construction rather than the sea conditions. I think you need a fibreglass expert to assess what is happening. I also suspect that the wind conditions you describe might have been greater than 12 knots as I think it would take more than that to build 4' seas. In any event, when healed over too far the rudder looses it hold and the boat will turn into the wind. If you flatten the boat by letting the sail out or reefing you might not have enough power to make headway to windward in strong winds. On one occasion when I was on Lake Ontario in strong winds I was able to sail across the wind and downwind quite comfortably but was unable to make headway coming back even with the motor on full (it kept coming out of the water on the crest of every wave). I had to abandon the sail and go down wind to the nearest marina where the boat stayed until the winds subsided - 3 days later. In that case the winds would have been considerably greater than 12 knots. GrahamSee the original archive post